FuelTech Ignitions & Electrical

FuelTech IGN1A Inductive Smart Coils

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.

5.0 out of 5 stars ( 2 )

$89.00

FuelTech FTSPARK-8 GEN 3 Ignition Systems

FuelTech FTSPARK 8 GEN 3 MAX2000 ignition systems are high performance, eight channel ignition modules engineered to deliver precise, reliable spark control for demanding racing and high power engine applications. Designed to integrate seamlessly with FuelTech FT Series ECUs, it provides powerful ignition energy and accurate timing control across a wide range of engine configurations. The Gen3 design improves response, durability, and thermal management, making it well suited for high RPM operation, boosted engines, and extreme race environments. With support for individual smart coils and sequential ignition strategies, the FTSPARK 8 GEN3 MAX2000 gives tuners and racers the control needed to maximize power, consistency, and drivability, whether the vehicle is used on the track, strip, or street.

Not Yet Reviewed

$2,599.00

FuelTech EGT-4 CAN Conditioners

FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included

Not Yet Reviewed

$398.99

—

$1,436.99

FuelTech WB-O2 Sensors

Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.

Not Yet Reviewed

$99.00

—

$699.00

FuelTech FTSPARK-6 GEN 3 Ignition Systems

Unleash precise, high-energy ignition control with the FuelTech FTSPARK-6 Gen 3 ignition systems, engineered for extreme performance and rock-solid reliability in high-horsepower applications. Designed to deliver a massive 2000mJ of spark energy, this advanced CDI box ensures consistent combustion under the most demanding conditions—whether you're pushing the limits on the street, strip, or dyno. Featuring cutting-edge multi-spark capability, robust protection systems, and seamless integration with FuelTech ECUs, the FTSPARK Gen 3 Max 2000 gives tuners unmatched control, cleaner burns, and improved engine efficiency at any rpm. Built for racers who demand nothing less than total ignition dominance, the FuelTech FTSPARK-6 Gen 3 ignition systems are the ultimate upgrade for serious performance builds. Features and specs: * Designed for extreme motorsport environments including drag racing, rally, and off-road * Optimized for 6-cylinder engine applications * Die-cast aluminum enclosure with IP67 rating for water and dust protection * Reinforced internal construction for vibration and impact resistance * High-quality automotive-grade connectors for secure electrical connections * Advanced thermal design for improved heat dissipation and durability * Up to 2000mJ ignition energy per channel for extreme spark intensity * 475-500 V primary coil voltage for improved ignition under high cylinder pressure * Up to 175A primary coil current when paired with FuelTech Racing CDI coils * Extended spark duration for improved combustion stability * Programmable multi-spark mode for difficult-to-ignite fuel mixtures * Supports rich, high boost, alcohol, and nitromethane applications * Programmable ignition energy control via CAN or dedicated input * Advanced CAN bus integration with FuelTech ECUs * Per-channel diagnostics and real-time monitoring capability * Single-wire multiplexed trigger input for simplified wiring * Compatible with a wide range of motorsport ECUs * Supports 4, 6, or 8 independent ignition channels * Direct drop-in upgrade for FTSPARK GEN2 systems with identical pinout and mounting points

Not Yet Reviewed

$2,399.00

FuelTech SwitchPanel Mini

FuelTech's SwitchPanel Mini is a backlit keypad button panel that communicates with PowerFT ECUs via FTCAN 2.0. Their compact size allows the panels to be installed in any space, and the identification of each button is made through several predefined labels that come with the product--in addition to allowing you to create your own tab using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function. Make your build look even better with the FuelTech SwitchPanel Mini! Additional features and benefits: * SwitchPanel Mini keypad has configurable buttons with multicolor backlighting * Material construction: Silicone rubber with polyurethane hardcoat * Compatible with all features present in the PowerFT line ECUs * All buttons can be configured, such as 2-step, air conditioning, Boost +, engine start button, switch dashboard screen, etc. * Stores and saves inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs * Well-spaced buttons with a clear tactile perception works great even while wearing gloves * Switch type functions are also supported, such as the day/night mode button, Burnout, Progressive Nitrous, internal datalogger, etc. * IP67 protection rating against water and dust * Case features screws on the back to allow easy and discreet installation, and can be integrated into the dashboard for professional look * Includes SwitchPanel Mini with harness, mounting kit, label sheet, and operation and installation instructions

Not Yet Reviewed

$399.00

—

$409.00

On Sale

FuelTech FT600 EFI System

FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use

Not Yet Reviewed

$2,999.00

$2,299.00

FuelTech Pressure Sensors

FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.

Not Yet Reviewed

$129.00

FuelTech Relays

FuelTech offers high-quality sealed relays which are typically used for ECU, injectors, and coils when building your own harness. One relay is required per item being wired. Relays have a built-in 40 amp fuse. Electrical Connections: 85 - Trigger - FT auxiliary output (activated when switched to ground) 86 - Switched 12V 30 - Battery 12V 87 - Output for load - Normally open contact - 40A

Not Yet Reviewed

$14.00

—

$139.00

FuelTech CDI Racing Ignition Coils

FuelTech CDI racing coils were developed to be used with the FuelTech FTSPARK on engines running individual coils and also rotary engines. The coils are designed to be used ONLY in conjunction with capacitive discharge ignitions (like a FTSPARK, for example). Using the coils with inductive ignition drivers will damage them. Do not use with FuelTech SparkPRO. Recommended spark plug wires: MSD Super Conductor, MSD-31193.

5.0 out of 5 stars ( 2 )

$79.00

On Sale

FuelTech FT450 EFI System

FuelTech FT450 EFI systems work with the ECU electronic injection system in a wide range of vehicles. They act as an engine monitoring and control system for your electronic fuel injection with their integrated instrument panel, data acquisition, and power management capabilities. Modify your injection setup for the performance you want with a FuelTech FT450 EFI system.

5.0 out of 5 stars ( 1 )

$999.00

$699.00

FuelTech FT450/550 A Unterminated Harnesses

FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT450/550 A unterminated harnesses are offered in 10 ft. and 20 ft. lengths for FT450/550 A connectors. Wire your project from scratch with the help of FuelTech's unterminated harnesses.

5.0 out of 5 stars ( 1 )

$139.00

—

$189.00

FuelTech Plug Kits

FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.

Not Yet Reviewed

$10.99

—

$159.00

FuelTech Exposed Tip Thermocouples

FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners

Not Yet Reviewed

$99.00

FuelTech WB-O2 Nano Unterminated Harnesses

FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech WB-O2 Nano unterminated harnesses are ready to wire your wideband oxygen sensor display and conditioner. They are offered in 3 ft., 6.5 ft. (recommended size for most applications), and 15 ft. lengths. Easily install a Nano with the help of FuelTech's unterminated harnesses.

Not Yet Reviewed

$69.00

—

$79.00

FuelTech Hall Effect Converters

FuelTech hall effect converters are designed to read an analog VR signal and transform init to a digital signal (Hall). This is recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters. (Note: Not compatible with differential hall-effect or magneto-resistive sensors.)

Not Yet Reviewed

$99.00

FuelTech Relay Connectors

FuelTech offers automotive relay holders for 4- or 5-pin mini ISO relays (regular 40 amp relays). They're the perfect relay connectors to use with the 40 amp relay with built-in fuse. Their crimp terminals are rated for high current and are the special spring pressure contact terminal to guarantee great contact even under vibration environment. Kit includes: * Housing with mounting flap to be mounted individually or can be interlocked * 3 of the high current crimp terminals to be used on pin 30, 87 and 87a compatible with wire 3.3mm2 to 5.3mm2 (12AWG to 10AWG) * 2 of the low current crimp terminals to be used on pins 85 and 86 compatible with wire 0.5mm2 to 0.8mm2 (20AWG to 18AWG)

Not Yet Reviewed

$25.00

FuelTech PRO550/600 V8 Smart Coil Harnesses

FuelTech PRO550/600 V8 Smart coil harnesses are true plug-and-play expansions to complement both the PRO550 and PRO600 V8 harness. With these expansion harnesses you can make the change to multi-Smart coils with ease. Each harness is fitted with a 16-way CPC firewall connection that makes adding the coils a simple installation. The harnesses include all terminations to suit the Smart coils, FuelTech CAN connection, and output controls. FuelTech PRO550/600 harnesses have a label for each connector and the insulation is heat, moisture, and oil-resistant. Additional information: * Harness is built for use with FuelTech's Smart ignition coils with built-in igniter * Uses outputs B (gray wires) on PRO600 harness * Includes: -- Fuse and relay -- Power and ground ring terminals (battery) -- 10-way connector with wires for connection with the ECU and CPC connector for the firewall

Not Yet Reviewed

$549.00

FuelTech FT550 B Unterminated Harnesses

FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT550 B unterminated harnesses are for upgrading from FT450. The B harnesses are offered in 10 ft. and 20 ft. lengths. Wire your project from scratch with the help of FuelTech's unterminated harnesses.

Not Yet Reviewed

$139.00

—

$189.00

FuelTech Peak and Hold Harnesses

FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak and Hold systems. FuelTech Peak and Hold harnesses are ready to wire your injector drivers and they are compatible with all current versions. Easily install your Peak & Hold unit with the proper FuelTech's harness.

Not Yet Reviewed

$29.00

—

$129.00

FuelTech Temperature Sensors

FuelTech's temperature sensors are engineered to provide accurate, real-time data for high-performance automotive and racing applications. The benefits of the FuelTech's temperature sensors stem from their durability, precision, and seamless integration with FuelTech's engine management systems (ECUs). By monitoring the temperature of the intake air and fuel, the ECU can make fine-tuned adjustments to fuel delivery and ignition timing to ensure a consistent air-fuel mixture for maximum power and efficiency.

Not Yet Reviewed

$69.00

On Sale

FuelTech NanoPRO Oxygen Sensor Conditioners

FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V

Not Yet Reviewed

$349.00

$299.00

FuelTech CDI Racing Ignition Coil Brackets

FuelTech CDI racing ignition coil brackets will mount four FuelTech CDI racing ignition coils. Made from lightweight billet aluminum (only 13.1 oz.), the bracket kits include four 1/4 in. socket head cap screws to mount the coils to the bracket and four 1/4 in. threads in the back, front, and bottom for mounting to the chassis.

Not Yet Reviewed

$129.00

FuelTech Throttle Position Sensors

FuelTech designed their throttle position sensors (Ford) for specific Mustangs using aftermarket throttle bodies, such as Accufab Racing and Wilson Manifolds. They directly monitor the open position of the TB plates, which helps your computer (ECU) figure out how much air is coming in. Boost your engine's performance by providing accurate data in one of the most critical applications with a FuelTech throttle position sensor.

Not Yet Reviewed

$79.00