Availability
On Sale
FuelTech FT450 EFI systems work with the ECU electronic injection system in a wide range of vehicles. They act as an engine monitoring and control system for your electronic fuel injection with their integrated instrument panel, data acquisition, and power management capabilities. Modify your injection setup for the performance you want with a FuelTech FT450 EFI system.
( 1 )
$899.00
$699.00
FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.
Not Yet Reviewed
$599.00
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$699.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/FT550 6-cylinder universal A harnesses have all the components needed to make a plug-and-play installation on an engine with a standard setup. The connectors, relays, and fuses are directly built-in and can be used with nearly any application with six injectors and six coils. They can be used with high or low impedance injectors, and the harnesses are set up for either VR or Hall effect cam and crank sensors. FuelTech 6-cylinder A harnesses include three relays with built-in fuses for main electronics, injectors, and coils, and the insulation and connectors are moisture, heat, and oil-resistant.
Not Yet Reviewed
$759.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/550 4-cylinder universal A harnesses can be used with both the FT450 and FT550 ECUs in a complete plug-and-play style. They fit systems with up to four injectors and four individual smart coils, wired in semi-sequential fuel injection and wasted spark ignition. They can be used with high or low impedance injectors; low impedance requiring the use of a peak and hold driver; high impedance requiring a peak and hold jumper harness (both sold separately). The harnesses are set up for either VR or Hall effect cam and crank sensors and include three relays with built-in fuses for main electronics, injectors, and coils. FuelTech universal 4-cylinder A harness has a label for each connector and the insulation is heat, moisture, and oil-resistant.
Not Yet Reviewed
$549.00
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$674.00
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$799.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
