Availability
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT450/550 A unterminated harnesses are offered in 10 ft. and 20 ft. lengths for FT450/550 A connectors. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
( 1 )
$119.00
—
$169.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT550 B unterminated harnesses are for upgrading from FT450. The B harnesses are offered in 10 ft. and 20 ft. lengths. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$119.00
—
$149.00
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$159.00
FuelTech CDI racing ignition coil brackets will mount four FuelTech CDI racing ignition coils. Made from lightweight billet aluminum (only 13.1 oz.), the bracket kits include four 1/4 in. socket head cap screws to mount the coils to the bracket and four 1/4 in. threads in the back, front, and bottom for mounting to the chassis.
Not Yet Reviewed
$119.00
FuelTech backpressure dampening canisters will make a great addition to your turbocharged engine. Measuring the exhaust backpressure is vital data required to best determine the true efficiency of your combination. By separating the backpressure sensor from the direct connection to the exhaust manifold using FuelTech's backpressure canister, the sensor will be protected from heat, moisture--and has pressure spike filtering naturally built into the canister. This filtering assists in protecting the sensor and allows you to see true indication of pressure in the exhaust manifold. These billet aluminum backpressure canisters measure 2 3/4 in. to 2 1/2 in. with mounting holes 2 in. center-to-center. The sensor port and hardline inlet are tapped to 1/8 in. NPT. Add one of these backpressure canisters to your project today!
Not Yet Reviewed
$199.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech Peak & Hold harnesses are ready to wire your injector drivers and they are compatible with all current versions. Easily install your Peak & Hold unit with the proper FuelTech's harness.
Not Yet Reviewed
$119.00
FuelTech has released a variety of engine harnesses for popular engine combinations, boost control, and data-logging, including these 10 ft. input expander harnesses. From plug-and-play to unterminated—FuelTech has the correct harness to help complete your FuelTech ECU-equipped project.
Not Yet Reviewed
$199.00
FuelTech offers a variety of data acquisition components, including driveshaft sensors compatible with many advanced engine control and monitoring systems (ECU). They're available in different thread diameters. The primary purpose of FuelTech driveshaft sensors is to provide real-time, accurate driveshaft (rpm) data for advanced traction control systems to improve vehicle performance by allowing for faster, more precise adjustments to power reduction and tire slip detection. Benefits include enhanced performance through optimized fuel and ignition maps, improved data accuracy for logging and tuning, and reliable integration with FuelTech ECUs to push vehicles to their limits with greater precision and confidence.
Not Yet Reviewed
$179.00
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$129.00
FuelTech Davis 32T driveshaft split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed, and accuracy. Utilizing 32 precision-machined teeth instead of magnets provides a very precise trigger on the edge of the trigger, as opposed to a variable magnetic field. These collars are available in various diameters. * Compatible with the following ECUs: FT600 / FT550 / FT500 / FT500LITE / FT450
Not Yet Reviewed
$175.00
The FuelTech FT dual power drivers have two half bridge outputs that allows the activation of up to 25A current. With two half bridge outputs the DPD can drive a single motor in two directions, or two motors in a single direction. These units are able to drive high-speed PWM (using PWM ECU output). The robust hardware brings very low delay on activation, allowing the use of controls that use high-speed PWM signal. Tech specs: * Power: 9 V to 30 V * Max outputs current (total): 25A * Peak current: 100A to 10ms * Operating voltage: 9 V to 30 V * Max operating frequency: 25KHz @ 30 V * Input trigger level Low: <1.3 V * Input trigger level High: >1.6 V * Switching delay: high-to-low: 5.6 microseconds; low-to-high: 6 microseconds
Not Yet Reviewed
$219.00
FuelTech cam sync bracket kits are a mounting bracket and magnetic kit designed only for use with a raised cam BBC when utilizing a camshaft belt drive and requires MSD ignition Hall Effect pickup (sold separately). The mounting hardware is included in the bracket kit for installation. Please note that some modifications may be required to correctly fit your application.
Not Yet Reviewed
$119.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FTSPARK-8 unterminated harnesses are ready to wire your high-energy CDI. Wire from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$189.00
FuelTech connector kits are essential components for achieving peak electrical performance and reliability in high performance engine applications. Their FT700 connector kits are recommended for those upgrading to the FT700 ECU and need to modify their existing harness for the new connector. Kits include: * Four FT700 connectors (A, B, C, and D) * 120 FT700 Terminals * One CAN A female connector kit with gold plated terminals * Two CAN B female connector kits
Not Yet Reviewed
$169.00
FuelTech's FT550 connector kits are recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors. FuelTech FT550 connector kit includes: * Two FT550 connectors (A & B) * (56) FT550 terminals * CAN A harness * CAN B connector kit
Not Yet Reviewed
$139.00
FuelTech FT700 Multimedia M harnesses connect FuelTech ECUs with multimedia components, allowing for easy integration of features, such as audio/video inputs. They ensure seamless communication, offering tuners enhanced functionality and a streamlined installation process. Maximize the capabilities of your FT700 system with a FuelTech FT700 Multimedia M harness.
Not Yet Reviewed
$129.00
FuelTech SparkPRO ignitions are available in versions from one to eight ignition outputs. They feature high-energy inductive ignition to be used with ignition coils without igniter (dumb coils). The modules deliver high voltage at the coil's primary, up to 430 V. Additional details: * Each SparkPRO channel can be connected to only one coil at a time * Compatible with any programmable ECU that has dwell control * Cannot be used with stock ECU * Dimensions: 115 x 90 x 33mm Kit contents: * One SparkPRO ignition * One operation and installation guide * One 6.5 ft. SparkPRO unterminated harness (optional) * One FuelTech black carbon fiber sticker
Not Yet Reviewed
$169.00
—
$249.00
FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.
Not Yet Reviewed
$179.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FTSPARK-6 unterminated harnesses are ready to wire your high-energy CDI. Wire from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$159.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
