FuelTech Race Electronics Ignitions & Electrical - In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

FuelTech EGT-4 CAN Conditioners

FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included

Not Yet Reviewed

$399.00

—

$1,348.00

FuelTech Remote Mount Pressure Sensor Blocks

FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)

1.0 out of 5 stars ( 1 )

$89.00

FuelTech Exposed Tip Thermocouples

FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners

Not Yet Reviewed

$99.00

FuelTech Peak & Hold Harnesses

FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech Peak & Hold harnesses are ready to wire your injector drivers and they are compatible with all current versions. Easily install your Peak & Hold unit with the proper FuelTech's harness.

Not Yet Reviewed

$129.00

FuelTech EGT-4 CAN Harnesses

FuelTech has released a variety of engine harnesses for popular engine combinations, boost control, and data-logging, including these terminated EGT-4 Can harnesses. From plug-and-play to unterminated—FuelTech has the correct harness to help complete your FuelTech ECU-equipped project.

Not Yet Reviewed

$29.00

FuelTech Backpressure Dampening Canisters

FuelTech backpressure dampening canisters will make a great addition to your turbocharged engine. Measuring the exhaust backpressure is vital data required to best determine the true efficiency of your combination. By separating the backpressure sensor from the direct connection to the exhaust manifold using FuelTech's backpressure canister, the sensor will be protected from heat, moisture--and has pressure spike filtering naturally built into the canister. This filtering assists in protecting the sensor and allows you to see true indication of pressure in the exhaust manifold. These billet aluminum backpressure canisters measure 2 3/4 in. to 2 1/2 in. with mounting holes 2 in. center-to-center. The sensor port and hardline inlet are tapped to 1/8 in. NPT. Add one of these backpressure canisters to your project today!

Not Yet Reviewed

$199.00

FuelTech FT700 Connector Kits

FuelTech connector kits are essential components for achieving peak electrical performance and reliability in high performance engine applications. Their FT700 connector kits are recommended for those upgrading to the FT700 ECU and need to modify their existing harness for the new connector. Kits include: * Four FT700 connectors (A, B, C, and D) * 120 FT700 Terminals * One CAN A female connector kit with gold plated terminals * Two CAN B female connector kits

Not Yet Reviewed

$179.00

FuelTech FT700 C and D Unterminated Harnesses

With superior quality and adaptability, FuelTech's unterminated wiring harnesses empower enthusiasts and professionals alike to unleash the full potential of their vehicles. FuelTech FT700 C and D unterminated harnesses are optional, but highly recommended wiring solutions, allowing you to fully leverage the engine management capabilities of FuelTech's ECUs. These harnesses are essential to use the ECUs' two internal wideband O2 sensor controllers, as well as substantially increasing the available inputs and outputs. Get unparalleled flexibility for your wiring needs with FuelTech unterminated wiring harnesses.

Not Yet Reviewed

$329.00

FuelTech FT700 Multimedia M Harnesses

FuelTech FT700 Multimedia M harnesses connect FuelTech ECUs with multimedia components, allowing for easy integration of features, such as audio/video inputs. They ensure seamless communication, offering tuners enhanced functionality and a streamlined installation process. Maximize the capabilities of your FT700 system with a FuelTech FT700 Multimedia M harness.

Not Yet Reviewed

$139.00