Availability
FuelTech's SwitchPanel Mini is a backlit keypad button panel that communicates with PowerFT ECUs via FTCAN 2.0. Their compact size allows the panels to be installed in any space, and the identification of each button is made through several predefined labels that come with the product--in addition to allowing you to create your own tab using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function. Make your build look even better with the FuelTech SwitchPanel Mini! Additional features and benefits: * SwitchPanel Mini keypad has configurable buttons with multicolor backlighting * Material construction: Silicone rubber with polyurethane hardcoat * Compatible with all features present in the PowerFT line ECUs * All buttons can be configured, such as 2-step, air conditioning, Boost +, engine start button, switch dashboard screen, etc. * Stores and saves inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs * Well-spaced buttons with a clear tactile perception works great even while wearing gloves * Switch type functions are also supported, such as the day/night mode button, Burnout, Progressive Nitrous, internal datalogger, etc. * IP67 protection rating against water and dust * Case features screws on the back to allow easy and discreet installation, and can be integrated into the dashboard for professional look * Includes SwitchPanel Mini with harness, mounting kit, label sheet, and operation and installation instructions
Not Yet Reviewed
$419.00
—
$429.00
FuelTech offers high-quality sealed relays which are typically used for ECU, injectors, and coils when building your own harness. One relay is required per item being wired. Relays have a built-in 40 amp fuse. Electrical Connections: 85 - Trigger - FT auxiliary output (activated when switched to ground) 86 - Switched 12V 30 - Battery 12V 87 - Output for load - Normally open contact - 40A
Not Yet Reviewed
$12.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT450/550 A unterminated harnesses are offered in 10 ft. and 20 ft. lengths for FT450/550 A connectors. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$119.00
—
$169.00
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$8.00
—
$12.00
FuelTech offers automotive relay holders for 4- or 5-pin mini ISO relays (regular 40 amp relays). They're the perfect relay connectors to use with the 40 amp relay with built-in fuse. Their crimp terminals are rated for high current and are the special spring pressure contact terminal to guarantee great contact even under vibration environment. Kit includes: * Housing with mounting flap to be mounted individually or can be interlocked * 3 of the high current crimp terminals to be used on pin 30, 87 and 87a compatible with wire 3.3mm2 to 5.3mm2 (12AWG to 10AWG) * 2 of the low current crimp terminals to be used on pins 85 and 86 compatible with wire 0.5mm2 to 0.8mm2 (20AWG to 18AWG)
Not Yet Reviewed
$20.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT550 B unterminated harnesses are for upgrading from FT450. The B harnesses are offered in 10 ft. and 20 ft. lengths. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$119.00
—
$149.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech WB-O2 Nano unterminated harnesses are ready to wire your wideband oxygen sensor display and conditioner. They are offered in 3 ft., 6.5 ft. (recommended size for most applications), and 15 ft. lengths. Easily install a Nano with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$65.00
—
$69.00
FuelTech's staging/brake control solid state relays provide fast switching speed, which is perfect for PWM control and for use as a normal relay. Solid state relay features: * Power 12/16 V to solenoid or actuator * Available with or without sealed relay holder * Can be used on the following: FT600/FT550/FT500/FT500LITE/FT450 built-in staging control * Can be used on the following: FT600/FT550/FT500/FT500LITE/FT450 built-in brake control * No mechanical interior parts * Offers silent operation * Nominal 20A/Max 30A * PWM frequency: 0-1000Hz Electrical connections: -- 30 – switched 12 V—use fuse -- 85 – not connected -- 86 – Trigger—FT auxiliary output (activated when switched to ground) -- 87 - output for load—normally open contact: 20A
Not Yet Reviewed
$79.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech LS550 V8 complete harnesses are the best fit for a standalone LS swap utilizing the FuelTech FT550 or FT550LITE ECU and GM LS engine. These plug-and-play harnesses come pre-terminated to suit an LS engine with all relays and fuses for a simple 3-wire battery hookup and ignition power. They are ready for both 58x and 24x triggers with provision for direct connection to LS3-style ignition coils, GM-style flex fuel sensor, and dual wideband Nano connection. FuelTech's LS550 harnesses are set up for both cable and drive-by-wire based throttles, with the connector for a GM-style accelerator pedal on the cabin side of the harnesses. Each connector has its own label and the connectors and harness insulation are heat, moisture, and oil-resistant.
Not Yet Reviewed
$999.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/550 4-cylinder universal A harnesses can be used with both the FT450 and FT550 ECUs in a complete plug-and-play style. They fit systems with up to four injectors and four individual smart coils, wired in semi-sequential fuel injection and wasted spark ignition. They can be used with high or low impedance injectors; low impedance requiring the use of a peak and hold driver; high impedance requiring a peak and hold jumper harness (both sold separately). The harnesses are set up for either VR or Hall effect cam and crank sensors and include three relays with built-in fuses for main electronics, injectors, and coils. FuelTech universal 4-cylinder A harness has a label for each connector and the insulation is heat, moisture, and oil-resistant.
Not Yet Reviewed
$549.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/FT550 6-cylinder universal A harnesses have all the components needed to make a plug-and-play installation on an engine with a standard setup. The connectors, relays, and fuses are directly built-in and can be used with nearly any application with six injectors and six coils. They can be used with high or low impedance injectors, and the harnesses are set up for either VR or Hall effect cam and crank sensors. FuelTech 6-cylinder A harnesses include three relays with built-in fuses for main electronics, injectors, and coils, and the insulation and connectors are moisture, heat, and oil-resistant.
Not Yet Reviewed
$759.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech Peak & Hold harnesses are ready to wire your injector drivers and they are compatible with all current versions. Easily install your Peak & Hold unit with the proper FuelTech's harness.
Not Yet Reviewed
$29.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT600 unterminated harnesses consist of the A harness and B harness. They are offered in 10 ft. and 20 ft. lengths with identification printed on each wire. Start from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$299.00
—
$379.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FTSPARK-8 unterminated harnesses are ready to wire your high-energy CDI. Wire from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$189.00
FuelTech's travel sensor connectors are for use for FuelTech's travel sensor. These travel sensor connectors are a high-quality sealed relay, which is typically used for ECU, injectors, and coils when building your own harness. Note: Connector color may vary based on stock availability.
Not Yet Reviewed
$6.00
FuelTech FT550 4-cylinder universal B expansion harnesses complement FuelTech's universal 4-cylinder A harness with the options to control up to eight injectors staged sequentially, have direct connection for inbuilt gear controller, and the additions to inputs and outputs. The harnesses come with a relay with a built-in fuse for power supply to the extra four injectors. The injectors are to be of high impedance only. FuelTech's universal 4-cylinder B harness has a label for each connector and the insulation is heat, moisture, and oil-resistant. Connectors: * FT550 (connector B) * Four EV1 injectors (for high impedance injectors only) * FT CAN B connector * GearController sensor connector * Extra INPUTS connector to custom wire up to five additional input channels for the engine or chassis datalogging--mating connector kit included * Extra OUTPUTS connector to custom wire up to eight additional outputs--mating connector kit included * Relay with fuse for injectors
Not Yet Reviewed
$299.00
FuelTech's FT550 connector kits are recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors. FuelTech FT550 connector kit includes: * Two FT550 connectors (A & B) * (56) FT550 terminals * CAN A harness * CAN B connector kit
Not Yet Reviewed
$139.00
FuelTech offers Peak and Hold Jumpers in both unterminated and pre-terminated applications to help you to complete your FuelTech ECU-equipped project. Order the connectors designed for your application needs.
Not Yet Reviewed
$13.00
FuelTech's sealed relay holders enable you to make simple updates or replacements in your vehicle. Use these FuelTech sealed relay holders to make installation easier! Order the relay holder needed for your application.
Not Yet Reviewed
$33.00
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FTSPARK-6 unterminated harnesses are ready to wire your high-energy CDI. Wire from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$159.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
