Artec Industries at Summit Racing

Artec Industries Steel D.O.M. Tubing

You can now custom build your project like you want using Artec Industries steel D.O.M. tubing. This convenient steel tubing is Drawn Over Mandrel and has tighter wall thickness tolerances. D.O.M. tubing is available in precut lengths. Choose the diameter and thickness you need to start your build.

5.0 out of 5 stars ( 8 )

$109.99

—

$149.99

Artec Industries Battery Boxes

Artec Industries battery boxes are guaranteed to outperform the competition! Their sleek, no-nonsense design gives you the peace of mind knowing your battery is secure in the most demanding environments. They're precision CNC-cut from 10-gauge cold-rolled steel plate and include high-quality mounting hardware for installation. Your battery will fit snugly, eliminating movement that causes premature wear and shorter life. It's power source security on the trail!

4.53 out of 5 stars ( 19 )

$83.99

—

$104.99

Artec Industries AAM 9.25 Lower Axle Trusses

Artec Industries AAM 9.25 lower axle trusses reinforce your entire front axle. Pairing heavy engines and stock axles isn't a great tandem for handling abuse. Artec trusses are CNC-cut and designed to add some beef—providing maximum up-travel with virtually no loss of ground clearance under your differential. No axles are unbreakable; but with the added muscle of Artec Industries AAM 9.25 lower axle trusses they'll have the needed strength to survive. Features include: * Built from 1/4 in. thick mild steel * Bottom triangle shape provides an increased structural rigidity and helps axle skid over obstacles better * Truss spans entire length of axle for complete reinforcement of the axle tubes * Includes upper inner C-gussets for total axle reinforcement * Comes in six separate pieces for compact shipping and easier installation

Not Yet Reviewed

$309.99

Artec Industries Lower Control Arm Brackets

Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.

5.0 out of 5 stars ( 7 )

$76.99

—

$87.99

Artec Industries JL/JT APEX Front Axle Armor Kits

Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel

Not Yet Reviewed

$274.99

Clearance

Artec Industries Easy 4-Link Bracket Sets

Artec Industries Easy 4-Link bracket sets provide one of the simplest ways to get your links done. The kits are based off popular parts for a single-or dual-triangulated 4-link suspension with angled upper control arms and straight or very slightly angled lowers, depending on your application. A-kit brackets allow for separate upper and lower mounts on the frame side for customizable 4-link setups. The B-kit brackets are combined for easy setup and upper mounts allow for adjustability. The C-kit brackets allow for lowers that can attach to a crossmember under the transfer case and uppers that attach on inside of frame rails. Order the Artec Easy 4-Link bracket kit that best fits your suspension application.

Not Yet Reviewed

$428.99

$279.50

Artec Industries Universal Link Bushings

Artec Industries universal link bushings are the perfect multi-functional product for your fabrication needs. Whether you are using these link bushings for suspension joints, motor mounts, or any number of other uses, the Artec Industries universal link bushings are built with strength in mind.

5.0 out of 5 stars ( 1 )

$26.99

—

$28.99

Artec Industries 14-Bolt Rear Apex Short Axle Trusses

Artec Industries patent pending 14-bolt rear Apex short axle trusses feature a stronger design, lighter weight and are much easier to install. The key feature that sets them apart from the other brands is their unique peaked-shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous truss versions with long weld seams can lead to extra weld warping of the axle, longer install times and can be inconsistent. Without long seams to weld, the 14-bolt rear Apex short axle trusses can be dropped directly on to the axle, and then these trusses can be welded to the axle faster. Additional part features: * Designed using 3-D models directly from Ford and Jeep for an amazing fit and clearance with surrounding components * CNC precision-cut in-house from 3/16 in. mild steel for a lightweight yet strong solution * Patent pending Apex peaked top design provides more rigidity than a flat top truss design * CNC precision bent in-house for a great fitment * Installation is simple; literally drop the truss in place on the axle and it's ready to weld, no puzzle piece assembling * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Truss is low-profile allowing link joints to be mounted with ideal geometry—about 9 in. from the axle centerline * Truss is designed to fit in between leaf springs or can be used as a base for mounting link suspension mounts * 2-piece design means smaller packaging and less shipping costs along with easy installation Important note: Requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this item. Every axle varies slightly, and some fabrication may be required.

5.0 out of 5 stars ( 1 )

$219.99

Clearance

Artec Industries JK Under Armor Skid Plates

Artec Industries JK Under Armor skid plates provide your Jeep with full protection beneath the vehicle. These plates are designed using CAD files directly from the manufacturer. The belly pan skid plates ensure that you have a great fit with factory components. They are manufactured from 1/4 in. thick 6061 aluminum, with 3/16 in. zinc plated steel mounting brackets. Under Armor skid plates are precision CNC laser-cut and formed, offering both a strong and lightweight solution for the heavy Jeep JK. All bolts underneath are countersunk for an absolutely smooth bottom, and all nuts are pressed into steel brackets for easy, one-tool removal. Artec's modular design lets you remove one section at a time for vehicle servicing. These skid plates will protect the oil pan, transmission pan, fuel tank, front exhaust, and transfer case.

Not Yet Reviewed

$2,299.99

$1,259.50

Artec Industries Inner C Gussets

Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.

4.67 out of 5 stars ( 6 )

$94.93

—

$97.99

Artec Industries JK Rear Axle Trusses

Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.

Not Yet Reviewed

$131.99

Artec Industries Misalignment Spacers

Artec Industries misalignment spacers are great for use on any Heim that has a 7/8 in. bore that's being installed in a location where space is limited. They are also great for using in steering applications. Get your high-end misalignment spacers from Artec Industries.

Not Yet Reviewed

$18.99

—

$20.99

Artec Industries Track Bar Brackets

Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.

5.0 out of 5 stars ( 2 )

$84.50

Artec Industries High Steer Stud Kits

Finding the proper fasteners in your local hardware store can be a challenge—especially for automotive purposes. Instead, simply order Artec Industries high steer stud kits, the OE-style replacements needed for your Dana axle. Most of these steel studs have a black oxide finish, fine threads on both ends, and offer tensile strength up to 220,000 psi. (Some kits also include nuts and/or conical washers.) Remember, stock bolts are typically too short for high steer applications. Artec studs are sold individually or in multi-pack sets.

Not Yet Reviewed

$108.00

Artec Industries Coil Spring Correction Plates

It doesn't make sense for coil springs with an uneven bottom to sit on a flat plate. These Artec Industries coil spring correction plates weld to your bottom flat plate and provide a seat that follows the curvature of the coil spring. Artec plates will help eliminate spring bowing that is commonly found under coil suspensions using flat coil perches. The correction plates are made from 1/2 in. thick steel and precision CNC-machined with a 1/2 in. course thread hole to allow easy installation with coil retainer plates.

Not Yet Reviewed

$175.99

Artec Industries Lower Link Frame Brackets

Mount your lower link arm to the frame using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and include grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link frame brackets to be mounted at an angle without excess material hanging off the side. Not only do these brackets look better and more natural to the frame, but they also ensure less bracket sliding on the rocks and getting in the way.

5.0 out of 5 stars ( 4 )

$49.99

Artec Industries Shock Mount Tabs

Artec Industries offers a variety of shock mount tabs, from flat linear brackets to offset styles. These durable welding tabs are CNC laser-cut from 1/4 in. high-strength steel—and available in different lengths and curvatures to accommodate most standard tubing width applications.

5.0 out of 5 stars ( 4 )

$13.99

—

$14.99

Artec Industries Upper Truss Link Mounts

Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.

5.0 out of 5 stars ( 1 )

$46.99

Artec Industries Rod End Kits

Artec Industries rod end kits are a great way to add strength, reliability, and flexibility to any situation requiring rod ends—like suspension or steering applications. They utilize high-strength chromoly bodies with a polished chrome finish that's sure to impress. The ball is made from heat-treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection-molded nylon which keeps the joint quiet and tight for years of usability. Artec Industries rod end kits are available on right or left hand threads and great for the builder on a budget. Kits include: * 3/4 in.-16 tpi chromoly rod end with 3/4 in. bore * Jam nut * Tube adapter for 1.0 to 1.5 in. O.D. tubing * 2 stainless steel high-misalignment spacers

5.0 out of 5 stars ( 1 )

$47.29

Clearance

Artec industries High-Clearance Comp Front Bumpers

Artec industries High-Clearance Comp front bumpers are available for a variety of Jeep applications. The bumpers are fabricated from CNC laser-cut steel for ultimate resilience and include a sleek aerospace-grade skid. They also feature superior clearance, an integrated winch mount—and a robust grille guard hoop (some models only). Features and benefits: * Offers increased clearance and an improved approach angle, complemented by an integrated fairlead mount * Constructed using 1/4 in. and 3/16 in. CNC laser-cut and formed steel * Installation requires drilling and cutting 5.25 in. off the front frame horns, enhancing the approach angle * Features high clearance that bolts directly to a modified frame, anchored by an internal PEM plate * Incorporates a winch mount, crafted from 1/4 in. thick steel, ensuring enhanced rigidity * Designed with internal gussets and is directly tied to shackle mounts, delivering unmatched strength * Boasts shackle mounts made of 3/4 in. thick high-strength alloy steel * Features a 3/16 in. aerospace-grade aluminum bash skid, meticulously machined for countersunk hardware, ensuring a sleek finish * Skillfully contoured to provide an optimal approach angle and ample tire clearance * Offers multiple sway bar mounting solutions, though it's worth noting that the OEM electric sway bar is not compatible * Boasts an approximate total weight of 55 lbs. (or 65 lbs. with hoop) * The distinctive bull bar hoop is crafted from sturdy 1.75 in. DOM tubing (some models only) * Large plate steel gussets reinforce the hoop, adding both strength and style (some models only)

Not Yet Reviewed

$999.99

—

$1,299.99

$599.50

—

$779.50

Artec Industries Alpha Series Skid Plates

Artec Industries Alpha Series skid plates are engineered for unrivaled heavy-duty strengthened quality in off-road protection. Tailor your armor with a customizable skid plate, designed to suit your unique demands. Opt for the Full Belly Pan system for total coverage—or choose modular options such as Oil and Transmission Pan, Fuel Tank and Transfer Case, Etorque Skid, or Exhaust Skid protection. The Alpha Series systems are meticulously crafted from 1/4 in. thick 6061 T6 heat-treated bare aluminum skids and 3/16 zinc-plated steel backets—delivering extraordinary durability for any terrain. Precision CNC-cut and formed, the skid plates seamlessly integrate with factory components to provide the ultimate shield for your vehicle's underbelly. Order the Alpha Series skid plate recommended for your Jeep. Additional features: * Zinc-plated steel brackets * Designed from factory CAD files and 3-D laser Creaform scan technology for precision and fit * Custom countersunk bolts that match OEM thread * No overlapping skid plate system * Gains additional ground clearance over OEM * Fuel tank drop eliminated with additional strap * Crossmember is engineered for durability and strength * Lightweight, high strength, rust-resistant

Not Yet Reviewed

$2,999.99

Artec Industries Inner Fenders

Artec Industries inner fenders protect your wheel well compartments from dirt and debris in customizable, rugged style. They allow use of larger tires and can be used with most aftermarket fenders. Artec's proprietary process of stamping their distinctive logo adds an additional style element and increases the overall rigidity. Artec Industries inner fenders are available in pairs (driver and passenger side) for the front and rear. Front models are available in three styles: solid, vented, and Freedom. Order the pair(s) that match your Jeep application. Features and notes: * Proprietary A-blade stamping process for increased rigidity * Lightweight 1/16 in. aluminum construction * CNC laser-cut and CNC-bent for precise fit * Solid rear inner fenders compatible with OEM fenders; front models typically require some trimming * Mounts to OEM holes on sub-frame plus additional holes to be drilled (see instructions for hole locations to determine if modification will be necessary with aftermarket fenders) * Front 2- and rear 4-piece construction per side for lower cost of shipping * Pressed PEM nuts on seam between pieces for easy installation * Shipped as bare, unfinished aluminum for decreased cost—and so you can paint or powdercoat to fit your style (while aluminum is corrosion-resistant, it is recommended to have some type of coating for long-term protection) * Small scratches from raw factory material, manufacturing process, or shipping process may be present

Not Yet Reviewed

$329.99

Artec Industries Ultimate 60 High Steering Arm Fasteners

Artec Industries offers Ultimate 60 high steering arm fasteners for a variety of Dana 60 axle applications. These knuckle bolt kits work well with Artec's Ultimate 60 high steer arms to increase overall knuckle and steering strength—as well as provide options for mounting your steering. Whether you just need to reinforce your knuckles, or want to run your tie rods in double shear, these kits are designed to fit multiple steering configurations. Two kits are required for a pair of high steer arms, and cutting the sleeves in half is necessary to run Heim joints in double shear. Tie rod end holes on the knuckle need to be drilled to 3/4 in. diameter. Order the model that's best suited for your application. Features include: * 3/4 in.-16, 10 in. long, Grade 8 bolt * 3/4 in.-16 all-steel mechanical locknut, the best type of locking nut for steering applications * Machined 1.25 in. O.D., 0.250 in. wall DOM sleeve * Sleeve ends machined for 3/4 in. Heim joints in double shear * Choose your tie rod mounting height * Available for OEM Ford, OEM Chevy, OEM Dodge, and all aftermarket knuckles Important safety notes: * Requires basic steel cutting tools for installation; use caution when cutting steel * Only experienced fabricators should attempt these modifications * All-steel mechanical locking nuts are designed NOT to be reused to ensure the nut does not loosen over time; always use a new nut if you remove it

Not Yet Reviewed

$58.29

Artec Industries General Purpose Tabs

Make secure automotive mounts using these convenient Artec Industries general purpose tabs. They're precision-cut from 1/4 in. thick steel and feature a bolt hole for secure attachment and a variety of uses. The welding tabs are available in different heights, shapes, and hole sizes to accommodate your specific project.

Not Yet Reviewed

$19.99

Artec Industries Parts and Accessories