Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Artec Industries Easy 4-Link Bracket Sets
Artec Industries Easy 4-Link bracket sets provide one of the simplest ways to get your links done. The kits are based off popular parts for a single-or dual-triangulated 4-link suspension with angled upper control arms and straight or very slightly angled lowers, depending on your application. A-kit brackets allow for separate upper and lower mounts on the frame side for customizable 4-link setups. The B-kit brackets are combined for easy setup and upper mounts allow for adjustability. The C-kit brackets allow for lowers that can attach to a crossmember under the transfer case and uppers that attach on inside of frame rails. Order the Artec Easy 4-Link bracket kit that best fits your suspension application.
Not Yet Reviewed
$428.99
$343.19
On Sale
Artec Industries Dana 60 Front Hydro Ram Mounts
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$379.99
—
$429.99
$303.99
—
$343.99
On Sale
Artec Industries JK APEX Front Axle Ultimate Armor Kits
Artec Industries JK APEX front axle ultimate armor kits furnish everything you need to make your axle the strongest it can be. These packages include an APEX front axle truss, heavy-duty front LCA brackets, heavy-duty shock brackets, inner C-gussets, and APEX heavy-duty tracbar bracket. Armor kits are available for a variety of specific Jeep applications, in both stock and raised track bar height models. How is the ultimate armor kit better than the regular armor kit? This kit includes entire replacement LCA brackets and shock brackets, whereas the regular armor kit just adds a skid plate to the factory LCA brackets. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA brackets, shock brackets, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Gussets and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$439.99
$351.99
On Sale
Artec Industries Inner Fenders
Artec Industries inner fenders protect your wheel well compartments from dirt and debris in customizable, rugged style. They allow use of larger tires and can be used with most aftermarket fenders. Artec's proprietary process of stamping their distinctive logo adds an additional style element and increases the overall rigidity. Artec Industries inner fenders are available in pairs (driver and passenger side) for the front and rear. Front models are available in three styles: solid, vented, and Freedom. Order the pair(s) that match your Jeep application. Features and notes: * Proprietary A-blade stamping process for increased rigidity * Lightweight 1/16 in. aluminum construction * CNC laser-cut and CNC-bent for precise fit * Solid rear inner fenders compatible with OEM fenders; front models typically require some trimming * Mounts to OEM holes on sub-frame plus additional holes to be drilled (see instructions for hole locations to determine if modification will be necessary with aftermarket fenders) * Front 2- and rear 4-piece construction per side for lower cost of shipping * Pressed PEM nuts on seam between pieces for easy installation * Shipped as bare, unfinished aluminum for decreased cost—and so you can paint or powdercoat to fit your style (while aluminum is corrosion-resistant, it is recommended to have some type of coating for long-term protection) * Small scratches from raw factory material, manufacturing process, or shipping process may be present
Not Yet Reviewed
$318.99
—
$516.99
$255.19
—
$413.59
On Sale
Artec Industries JK Heavy-Duty Crossmembers
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$571.99
$457.59
On Sale
Artec Industries APEX Front Axle Trusses
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$324.99
$259.99
On Sale
Artec Industries JK 1 Ton APEX Rear 14-Bolt Truss Swap Kits
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
$483.99
On Sale
Artec Industries JK/JL/JT 1 Ton APEX Front Super Duty Swap Kits
Artec Industries JK/JL/JT 1-ton APEX front Super Duty swap kits are stronger in design, lighter in weight, and easier to install. The patent-pending APEX trusses take these features to a whole new level along with precision fitment, and complete axle protection. Available with three different styles of upper control arm brackets, the kits contain upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * OEM location upper control arms mount to an ultra-high clearance differential bridge that hugs the shape of the casting (bushing or Johnny Joint option) * Truss extends under coil buckets all the way to inner C for end-to-end rigidity * Multi-piece truss design means smaller packaging with easy installation * Using a 1-ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Heavy-duty track bar bracket can slide to multiple positions for steering geometry fine tuning * Shock brackets have been moved up and out (compared to JK OEM position) for a slightly higher clearance lower control arm bracket
Not Yet Reviewed
$593.99
$475.19
On Sale
Artec Industries Axle Swap Kits
Make your axles more robust; swap a 1-ton front or rear axle into your Jeep with Artec Industries axle swap kits. They provide a heavy-duty truss and bracket system designed to take serious abuse and reinforce your entire axles. The components are precision CNC-cut and bent, all the necessary brackets are included, and the overall low-profile design means your axles are stronger, sleeker, easier to install, and less likely to interfere with vehicle components.
Not Yet Reviewed
$604.99
—
$615.99
$483.99
—
$492.79
On Sale
Artec Industries Dana 80 Rear Axle Trusses
More beef? You bet! Artec Industries adds even more muscle to your super-tough Dana 80 rear axle with their super-tough trusses. Precision CNC-cut and bent, these form-fitting trusses are built with 3/8 in. thick mild steel truss tops and 1/4 in. mild steel ram mounts and gussets to deliver maximum strength. You fly through the air, you land, the ground pushes up, and your truck pushes down---something has to give ... well, it won't be your Dana 80 axles reinforced with trusses from Artec Industries!
( 1 )
$419.99
$335.99
On Sale
Artec Industries Front Frame Coil Buckets
Do you have rusty, busted, or abused factory front coil buckets on your TJ or LJ? Or are you looking to change to a coil suspension on your YJ or other leaf sprung vehicle? Or do you want to customize your suspension? These heavy-duty TJ front frame side coil buckets from Artec Industries are a great replacement for your OEM coil buckets. They will also allow you build your suspension the way you want, not limiting you to how the factory intended. This DIY kit includes the laser-cut and precision CNC-bent pieces that will need to be welded together as well as onto the frame. The kit has been specifically designed to complement the factory frame, yet look distinctly hardcore. It's also engineered for maximum strength and easy assembly—with jigs and laser-etched part numbers so you can't put it together wrong. Product features: * CNC laser-cut and CNC-bent from heavy-duty 3/16 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Retains factory bump stop threading, so they're a direct replacement * Gusseted between the coil bucket and shock mount for extra strength * Includes a 2.0 in. O.D. piece of DOM tubing * Provides factory-style shock stem attachment, or choose to add shocks tabs for a clevis bushing-style shock attachment * Direct replacement for TJs and LJs—and can work as an upgrade for leaf sprung vehicles looking to change to coil spring suspension *NOTE: If not installing on a TJ or LJ, consideration must be made for the OEM frame width in comparison to axle width. Most leaf sprung frames do not turn inwards in this area like a TJ does, so the frame is wider. **NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Welding, grinding and fitment may be required when installing this kit. Every frame varies slightly and some fabrication may be required.
Not Yet Reviewed
$318.41
—
$351.99
$254.73
—
$281.59
On Sale
Artec Industries APEX 1-Ton Rear Axle Swap Brackets
"Outside the box thinking with a fresh approach to design." Artec Industries APEX rear 1-ton axle swap brackets are advanced bracket systems designed for use on almost any axle with a 3.5 in. axle tube. This kit provides the factory link, track bar, spring, anti-sway bar, bump stop pads and shock locations all encompassed in an axle tube reinforcing truss system. This kit is great for Super Duty Sterling 10.5 or 10.25, AAM 10.5 14 bolt, or a Ford 9.0 in. or 10.0 in. axle with 3.5 in. axle tubes. Other axles may be used, provided they are wide enough to fit the upper control arm brackets and you have a plan for mounting the ABS sensors. Features and benefits: * Coil brackets and bump stop pads merged to form an axle tube truss, allowing easy installation of other brackets * CNC cut from 1/4 in. and 3/16 in. steel for high strength, precision, and CNC bent for a great fit * Includes upper and lower control arm mounts, shock mounts, anti-sway bar mounts, trackbar mount, bump stop pads, coil spring mounts, and all brackets necessary for a complete axle swap * Built-in axle tube truss is quicker to weld than individual brackets, saving hours of installation time * Track bar mount includes four locations to accommodate aftermarket lifts, stock height hole not included
Not Yet Reviewed
$439.99
$351.99
On Sale
Artec Industries TJ/YJ Back Half Frame Kits
Artec Industries TJ/YJ back half frame kits allow many Jeep owners to eliminate the clunky back half of their stock frame and allow clearance for coilovers and/or larger heavy-duty axles. By narrowing the frame, you're able to run coilovers without notching and weakening your factory frame. Plus, since the shocks don't hang as low as the factory frame in the back, you can do a stretch with that one-ton axle and have better up-travel. Artec Industries TJ/YJ back half frame kits feature: * CNC laser-cut and bent from 1/4 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Interlocking jig and key holes for quick, one-way-only assembly * Maximum welding surface area with weld holes and fish mouth ends * Stylish curved design complements factory-style and increases strength at transitions * Wide enough to fit Artec fuel cell mounts for JAZ and RCI fuel cells
( 4 )
$406.99
$325.59
