Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Artec Industries Battery Boxes
Artec Industries battery boxes are guaranteed to outperform the competition! Their sleek, no-nonsense design gives you the peace of mind knowing your battery is secure in the most demanding environments. They're precision CNC-cut from 10-gauge cold-rolled steel plate and include high-quality mounting hardware for installation. Your battery will fit snugly, eliminating movement that causes premature wear and shorter life. It's power source security on the trail!
( 33 )
$83.59
—
$104.49
$66.87
—
$83.59
On Sale
Artec Industries Lower Control Arm Brackets
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
$61.59
On Sale
Artec Industries Inner C Gussets
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$102.29
$81.83
On Sale
Artec Industries Track Bar Brackets
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$87.99
$70.39
On Sale
Artec Industries High Steer Stud Kits
Finding the proper fasteners in your local hardware store can be a challenge—especially for automotive purposes. Instead, simply order Artec Industries high steer stud kits, the OE-style replacements needed for your Dana axle. Most of these steel studs have a black oxide finish, fine threads on both ends, and offer tensile strength up to 220,000 psi. (Some kits also include nuts and/or conical washers.) Remember, stock bolts are typically too short for high steer applications. Artec studs are sold individually or in multi-pack sets.
Not Yet Reviewed
$86.40
—
$108.00
$69.12
—
$86.40
On Sale
Artec Industries Front Bumper Skid Plates
Artec Industries offers skid plates for high-clearance Comp front bumpers on a variety of late model Jeep applications. They're fabricated from 3/16 in. aerospace-grade raw aluminum. The bolt-on bash skids are precision-machined for countersunk hardware, offering a sleek, durable finish.
Not Yet Reviewed
$74.99
$59.99
On Sale
Artec Industries JK APEX Front Axle Trusses
Artec Industries JK APEX front axle trusses introduce a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. The key feature that sets the APEX truss apart is its unique peaked shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous versions with long weld seams have led to extra weld warping of the axle, longer install times, and can be inconsistent. This peaked structure not only applies to the axle tube between the coil perches, but extends underneath the coil perches as well—forming a complete truss from end to end of the axle, an industry first in an OEM axle application. The JK APEX truss has been tested and proved to hold up to both extreme applications and daily driving. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
$96.79
On Sale
Artec Industries Adjustable Link Tower Brackets
Artec Industries adjustable link tower brackets are designed for use with large joints that have a 2.625 in. mounting width. The holes are set at 7, 8, and 9 in. from the axle centerline to allow you to fine-tune your suspension. They're manufactured from 1/4 in. thick steel and come in four unwelded pieces that jig together for easy assembly. These Artec brackets are especially useful if your tire size changes and the suspension needs to be adjusted. Rather than cutting off the old brackets and installing a taller one, you can simply move your link to the next higher mounting hole!
Not Yet Reviewed
$89.99
$71.99
On Sale
Artec Industries Quart Crate Holders
No more oil or fluid bottles bouncing around the back of your car, truck, SUV, boat or 4x4! Artec Industries quart crate holders neatly and securely organize your extra automotive fluids. These units fit nicely inside your trunk, behind a bench seat, or in other out-of-the-way places. The weight-saving design doesn't bog down your vehicle and even makes it simple to carry by hand. CNC precision laser-cut and bent to provide a snug fit, the holders feature a clip-in style hinge on one side and a strong locking clamp on the other. They'll store all standard-sized quart containers. The crate holders can be hard-mounted to your vehicle using simple tools, and the bare steel can be painted or powdercoated to prevent corrosion.
Not Yet Reviewed
$76.99
$61.59
On Sale
Artec Industries High-Clearance Front Fairlead Bumper Light Brackets
More light on the trails is never a bad thing, so equipping your Artec high-clearance front bumper with the ability for added illumination would be a smart move. To help you get started Artec Industries' front bumper light brackets are available for their high-clearance front fairlead bumpers. Get ready to enhance your nighttime adventures with extra forward facing lights by utilizing Artec light mounts.
Not Yet Reviewed
$112.99
$90.39
On Sale
Artec Industries TJ Coil Spring Perches and Retainers
Artec Industries rear TJ coil spring perches and retainers are designed for use with the Artec TJ axle truss or modular truss axle swap applications. They precisely locate the coil springs in the factory location, and are clockable to any angle for larger suspension lifts. The coil spring perches and retainers are CNC laser-cut and bent from 1/4 in. thick steel, and include the tubing spacers and mounting hardware. Order the model recommended for your Jeep application.
( 5 )
$102.99
—
$109.99
$82.39
—
$87.99
On Sale
Artec Industries APEX Raised Track Bar Brackets
Artec Industries APEX raised heavy-duty track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are for use only with APEX truss or no truss applications. They will NOT work with first generation Artec trusses. Features and notes: * Integrates with new APEX truss for JK. Not for use with Artec trusses prior to Nov. 2019 * Replaces factory bracket for those with 2.0 in. lift or higher * Lifts factory sway bar mount 1.75 in. * Adjusts roll center 3 in. higher for greater stability * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties, and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. NOTE: These brackets offer raised track bar holes at 3.0 in. The brackets are for use with a drag link flip (which requires a new track bar, minimum 3.0 in. lift and bump stop extensions). These brackets have nothing to do with your lift amount. * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes an adjustable track bar), choose a stock height replacement bracket.
Not Yet Reviewed
$87.99
$70.39
On Sale
Artec Industries Spare Tire Delete Kits
Artec Industries is excited to announce their new spare tire delete kits. The tailgate cover plates are manufactured from 1/16 in. thick aluminum and designed using state-of-the-art 3-D modeling. Artec utilizes original OEM files, then CNC laser-cuts and bends each piece in-house for a precise fit. They're hard-powdercoated black for good looks and durability. New hardware is included to mount the factory back-up camera and third brake light assembly. Original spare tire carrier hardware is re-used to mount the plate to the vehicle. Order the spare tire delete kit recommended for your specific vehicle.
Not Yet Reviewed
$87.99
—
$120.99
$70.39
—
$96.79
On Sale
Artec Industries APEX 1-Ton Front Differential Top Caps
Artec Industries 1-ton APEX front differential top caps are included in swap kits with the Daystar bushings or RockJock Johnny Joints UCA brackets, but not with the single adjustable truss upper link mount kits. Artec conveniently offers the APEX front differential top caps individually. These heavy-duty caps are CNC-cut and bent from thick mild steel and will weld directly to the differential casting, allowing the mounting of driver side upper control arm brackets. Choose the one designed to match your vehicle's application.
Not Yet Reviewed
$71.49
—
$76.99
$57.19
—
$61.59
On Sale
Artec Industries Rod End Kits
Artec Industries rod end kits are a great way to add strength, reliability, and flexibility to any situation requiring rod ends—like suspension or steering applications. They utilize high-strength chromoly bodies with a polished chrome finish that's sure to impress. The ball is made from heat-treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection-molded nylon which keeps the joint quiet and tight for years of usability. Artec Industries rod end kits are available on right or left hand threads and great for the builder on a budget. Kits include: * 3/4 in.-16 tpi chromoly rod end with 3/4 in. bore * Jam nut * Tube adapter for 1.0 to 1.5 in. O.D. tubing * 2 stainless steel high-misalignment spacers
( 1 )
$93.49
$74.79
On Sale
Artec Industries Adjustable Panhard Mounts
Artec Industries adjustable panhard mounts allow for different levels of drop to fine-tune your suspension. These steel mounts are for use with any 3 or 4-link suspensions and may require trimming to fit. Most will need to be welded securely into place. For a well-aligned suspension, use Artec Industries adjustable panhard mounts.
( 4 )
$69.99
$55.99
On Sale
Artec Industries LED Light Bar Bumper Mounts
Artec Industries' JL and JT front bumper 20 in. or 30 in. light bar bumper mounts bring durability and style to your Jeep. Crafted for most 20 in. and 30 in. LED light bars like Rigid and Baja Designs, their 10-gauge steel, CNC-cut, dimple die and bent, all in-house construction spells resilience. Experience the 15-minute installation, relish the sleek OEM black finish, illuminate your path and explore the unknown with the enduring spirit of Artec. Product details: * Compatible with 20 in. or 30 in. side stud LED light bars (Rigid and Baja Designs, depending on model) * Specifically for use with factory plastic or steel Jeep bumpers (not aftermarket) * Rigid 10-gauge steel; CNC laser-cut, dimple die, and bent * Designed using laser scans and OEM files for an exact fit * Includes sleek OEM-style black-coated hardware * Direct bolt-in installation; 15-minute setup * Adorned in OEM texture black for a refined look * Perfectly fits Jeep JL and JT models
Not Yet Reviewed
$109.99
$87.99
On Sale
Artec Industries JK Rear Frame UCA 3-Link Brackets
Artec Industries offer JK rear frame UCA 3-link chassis brackets that will allow for mounting a single upper control arm above the driveshaft in a Jeep JKU. These brackets are for use with RockKrawler Krawler joints that have a 2.325 in. mounting width and a hole size of 9/16 in. They are machined from 3/16 in. thick steel and are CNC-bent for precision. These brackets do require welding, and if so desired, may be painted. Each rear frame bracket welds between the two factory crossmembers above the driveshaft and is intended for use with a RockKrawler X-Factor rear 3-link upper control arm.
Not Yet Reviewed
$87.99
$70.39
On Sale
Artec Industries JL LED Light Bar Hood Mounts
Artec Industries JL LED light bar mounts are constructed from 1/8 in. thick steel and designed using state-of-the-art 3-D modeling with files directly from the manufacturer. These hood mounts are for a single straight LED light bar. Additional product features: * Designed to fit Rigid Industries E and SR Series light bars, and most straight light bars with studded ends * CNC laser-cut and CNC-bent in-house for precise fit * Powdercoated for durability * Includes new hardware and spacers * Direct bolt-in installation
Not Yet Reviewed
$74.99
$59.99
On Sale
Artec Industries Front Axle Lower Trusses
On a mission to provide world class aftermarket automotive parts, Artec Industries front axle lower trusses are designed to reinforce the entire front axle on the Ford Super Duty F-250 and F-350. With the heavy engines on these trucks, the stock front axles have suffered from bending and even breaking under hard use. These front axle lower trusses allow maximum up-travel while only decreasing under-axle clearance slightly. In fact, there is virtually no loss of ground clearance under the differential. They are great for those who like to push the skinny pedal down and get some air at the dunes or in the mud. The whole design is CNC cut and formed to fit great on your axle, so little-to-no grinding or modification required, providing a straightforward installation. Features include: * 1/4 in. thick mild steel is precision CNC designed, cut, and bent for great fitment * No loss of ground clearance under the cast differential * Triangular shape provides increased structural rigidity and helps axle skid over obstacles * Truss spans the entire length of axle, inner c to inner c, completely reinforcing the axle tubes * Comes in five separate pieces for compact shipping and easier installation
Not Yet Reviewed
$120.99
$96.79
On Sale
Artec Industries Large 4-Link Crossmember Brackets
Artec Industries large 4-link crossmember brackets allow for triangulated lower links that meet at a 1.75 in. O.D. round tube or 2.00 in. square tube crossmember between frame rails (depending on model). They're made for use with large joints that have a 2.625 in. mounting width. The hole size is 9/16 in., but can be drilled for larger sizes. Angles are set at 22 degrees each (44 degrees total) to allow use with Artec's angled lower link axle brackets. These large 4-link crossmember brackets are made from 1/4 in. thick steel and come in six unwelded pieces that jig together for easy assembly.
( 1 )
$114.99
$91.99
On Sale
Artec Industries High-Clearance Rear Bumper Winch Fairlead Brackets
Unleash the full potential of your off-road adventure with Artec Industries high-clearance rear bumper winch fairlead brackets. Designed for durability and performance, the mounts will comfortably secure up to a 12K winch, ensuring you're equipped for any challenge. They're engineered for easy installation and a perfect fit on your vehicle.
Not Yet Reviewed
$99.99
$79.99
On Sale
Artec Industries APEX Front Axle Trusses
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
$96.79
