Availability
You can now custom build your project like you want using Artec Industries steel D.O.M. tubing. This convenient steel tubing is Drawn Over Mandrel and has tighter wall thickness tolerances. D.O.M. tubing is available in precut lengths. Choose the diameter and thickness you need to start your build.
( 8 )
$109.99
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$87.99
Finding the proper fasteners in your local hardware store can be a challenge—especially for automotive purposes. Instead, simply order Artec Industries high steer stud kits, the OE-style replacements needed for your Dana axle. Most of these steel studs have a black oxide finish, fine threads on both ends, and offer tensile strength up to 220,000 psi. (Some kits also include nuts and/or conical washers.) Remember, stock bolts are typically too short for high steer applications. Artec studs are sold individually or in multi-pack sets.
Not Yet Reviewed
$108.00
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$93.49
—
$102.29
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$86.59
—
$100.00
Artec Industries offers Ultimate 60 high steering arm fasteners for a variety of Dana 60 axle applications. These knuckle bolt kits work well with Artec's Ultimate 60 high steer arms to increase overall knuckle and steering strength—as well as provide options for mounting your steering. Whether you just need to reinforce your knuckles, or want to run your tie rods in double shear, these kits are designed to fit multiple steering configurations. Two kits are required for a pair of high steer arms, and cutting the sleeves in half is necessary to run Heim joints in double shear. Tie rod end holes on the knuckle need to be drilled to 3/4 in. diameter. Order the model that's best suited for your application. Features include: * 3/4 in.-16, 10 in. long, Grade 8 bolt * 3/4 in.-16 all-steel mechanical locknut, the best type of locking nut for steering applications * Machined 1.25 in. O.D., 0.250 in. wall DOM sleeve * Sleeve ends machined for 3/4 in. Heim joints in double shear * Choose your tie rod mounting height * Available for OEM Ford, OEM Chevy, OEM Dodge, and all aftermarket knuckles Important safety notes: * Requires basic steel cutting tools for installation; use caution when cutting steel * Only experienced fabricators should attempt these modifications * All-steel mechanical locking nuts are designed NOT to be reused to ensure the nut does not loosen over time; always use a new nut if you remove it
Not Yet Reviewed
$58.29
Clean, low-profile lines and a high-clearance design make these Artec Industries shock mounts strong parts when installed. The heavy steel units are designed to replace your worn shock brackets. They require welding onto the side of the axle tube to install, and will handle some serious abuse. Artec universal high-clearance shock mounts are a great addition for all-wheelers, due to their beefy strength and protection of the shocks.
Not Yet Reviewed
$59.99
Artec Industries rod end kits are a great way to add strength, reliability, and flexibility to any situation requiring rod ends—like suspension or steering applications. They utilize high-strength chromoly bodies with a polished chrome finish that's sure to impress. The ball is made from heat-treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection-molded nylon which keeps the joint quiet and tight for years of usability. Artec Industries rod end kits are available on right or left hand threads and great for the builder on a budget. Kits include: * 3/4 in.-16 tpi chromoly rod end with 3/4 in. bore * Jam nut * Tube adapter for 1.0 to 1.5 in. O.D. tubing * 2 stainless steel high-misalignment spacers
( 1 )
$93.49
Artec Industries rear TJ coil spring perches and retainers are designed for use with the Artec TJ axle truss or modular truss axle swap applications. They precisely locate the coil springs in the factory location, and are clockable to any angle for larger suspension lifts. The coil spring perches and retainers are CNC laser-cut and bent from 1/4 in. thick steel, and include the tubing spacers and mounting hardware. Order the model recommended for your Jeep application.
( 5 )
$102.99
—
$109.99
Artec Industries adjustable link tower brackets are designed for use with large joints that have a 2.625 in. mounting width. The holes are set at 7, 8, and 9 in. from the axle centerline to allow you to fine-tune your suspension. They're manufactured from 1/4 in. thick steel and come in four unwelded pieces that jig together for easy assembly. These Artec brackets are especially useful if your tire size changes and the suspension needs to be adjusted. Rather than cutting off the old brackets and installing a taller one, you can simply move your link to the next higher mounting hole!
Not Yet Reviewed
$89.99
Artec Industries APEX raised heavy-duty track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are for use only with APEX truss or no truss applications. They will NOT work with first generation Artec trusses. Features and notes: * Integrates with new APEX truss for JK. Not for use with Artec trusses prior to Nov. 2019 * Replaces factory bracket for those with 2.0 in. lift or higher * Lifts factory sway bar mount 1.75 in. * Adjusts roll center 3 in. higher for greater stability * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties, and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. NOTE: These brackets offer raised track bar holes at 3.0 in. The brackets are for use with a drag link flip (which requires a new track bar, minimum 3.0 in. lift and bump stop extensions). These brackets have nothing to do with your lift amount. * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes an adjustable track bar), choose a stock height replacement bracket.
Not Yet Reviewed
$87.99
Artec Industries APEX heavy-duty stock track bar brackets are designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. They are 1/4 in. thick, precision-cut and formed to outperform the competition. These mild steel brackets are not for use with 1st generation Artec trusses (prior to Nov. 2019). Features and notes: * Integrates with new APEX truss for JK applications (late 2019-up) * Replaces factory bracket to prevent death wobble or other issues * Lifts factory sway bar mount 1.75 in. * Allows rotation of steering dampener to top side of tie rod for greater clearance * Improves ground clearance over factory brackets * If your lift replaces your track bar and mounts to the factory axle bracket (typical with a lift that includes a track bar), choose this bracket. If you are doing a drag link flip (minimum 3.0 in. lift needed for flip), choose a raised height bracket * This kit requires general welding and fabrication skills. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this kit. Every axle varies slightly, and some fabrication may be required.
Not Yet Reviewed
$65.99
Mount your lower link arm to the axle using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link axle brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the degree of offset needed for best fitment on your specific vehicle.
( 1 )
$59.99
—
$64.99
Artec Industries adjustable panhard mounts allow for different levels of drop to fine-tune your suspension. These steel mounts are for use with any 3 or 4-link suspensions and may require trimming to fit. Most will need to be welded securely into place. For a well-aligned suspension, use Artec Industries adjustable panhard mounts.
( 4 )
$69.99
Artec Industries tube link mounts are designed to mount your control arms to lower links or any other tubing. They're perfect for making your own radius arms or other smaller size links. The durable brackets are constructed from 1/4 in. thick boxed steel for high strength, and their tapered design provides a smooth transition from the mounts to the tubing. These mounts are available in universal and application-specific models.
Not Yet Reviewed
$54.99
Artec Industries offer JK rear frame UCA 3-link chassis brackets that will allow for mounting a single upper control arm above the driveshaft in a Jeep JKU. These brackets are for use with RockKrawler Krawler joints that have a 2.325 in. mounting width and a hole size of 9/16 in. They are machined from 3/16 in. thick steel and are CNC-bent for precision. These brackets do require welding, and if so desired, may be painted. Each rear frame bracket welds between the two factory crossmembers above the driveshaft and is intended for use with a RockKrawler X-Factor rear 3-link upper control arm.
Not Yet Reviewed
$87.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
