New Product Releases

Do a Proper Break-in Routine with PennGrade 1 Assembly Lubricants and Oil

Proper engine lubrication during assembly and break-in after a full rebuild or a cam and lifter swap is important for the engine’s overall life and performance. That involves a three-step process using high-quality assembly lubricant, break-in oil, and motor oil like those made by PennGrade 1 Oil.

The Break-in and High Performance Motor Oil is available in quart bottles or super-handy five-quart jugs that are more convenient to use and cost less than buying five single quarts. It’s nice to have choices.

Fragola EZ Street Plumbing is Made for Modern Fuel Systems

Today’s fuel—E15 pump gas, E85, diesel, methanol, or other ethanol blends—will wreck old-fashioned fuel line hose and fittings in short order. Fragola’s EZ Street Hose Ends and Fuel Hose are designed to handle these fuels without degrading or corroding. EZ Street plumbing has a 175 PSI operating pressure rating and can be used on carbureted and EFI fuel systems. It’s available in -6AN and -8AN sizes.

Scorpion Endurance Series Shaft-Mount Roller Rockers: Over-Engineered for Better Performance

We were talking with the rocker arm folks from Scorpion Racing Products at a recent trade show. We were surprised to learn that people didn’t know the company made shaft-mount roller arms—and really nice ones at that.

Scorpion has been making their Endurance Series shaft-mount rockers for years and we’ve heard nothing but good things about them from racers. In fact, Scorpion likes to point out that its rocker arms are over-engineered so your engine’s valvetrain timing stays rock-solid race after race. That’s a really big deal at high RPM where stud-mount rockers deflect and move around, which will cost you horsepower and increase valvetrain wear.

Brembo Premium UV Coated Brake Rotors Offer Better Stopping Power and Longer Life

Brembo’s Premium UV Coated Brake Rotors are a step up from the rotors the factory bolted to your vehicle. Most are made from a proprietary high-carbon cast iron alloy that offers improved brake response with low noise. Brembo then took it to another level by applying a solvent-free UV coating to the rotors. The coating protects the rotors from corrosion due to road salt, moisture, and road film and is environmentally friendly to boot. You don’t even have to clean the rotors before installation—just pull them out of the box and bolt them on with the included hardware.

Brembo UV Coated Brake Rotors are available for popular domestic and import vehicles from 1988 through today. Summit Racing also carries a good selection of rotors for import vehicles made from 1963 through 1987.

Summit Racing also carries these Brembo brake parts:
• Disc brake pad and rotor kits
• Brake pads
• DOT 4 and DOT 5 brake fluid
• Brake drums and shoes
• Brake pad wear sensors

CHECK OUT BREMBO’S PREMIUM UV COATED BRAKE ROTORS AT SUMMIT RACING

Take Your Truck or Jeep’s Performance to the Next Level with Rough Country Suspension Products

If you are yearning to conquer every road and trail, do it right with Rough Country chassis and suspension components. Summit Racing carries a big selection of Rough Country lift kits, shocks, and other parts including these:

X-Series N3 Suspension Lift Kits for Jeep
Take your Jeep to new heights with a Rough Country X-Series N3 Suspension Lift Kit. X-Flex control arms are fully greaseable and feature 2.5-inch diameter flex joints for loads of articulation plus durable OEM-style rubber bushings for a quiet ride. New springs increase ground clearance and maintain factory ride quality while leveling the vehicle. Nitrogen gas charged N3 shocks have 10-stage variable valving to deliver balanced performance on all surfaces. Additional features include:

Replace Those Leaky Fuel and Brake Lines with Fine Lines Direct-Fit Kits

Replace your vehicle’s crusty and leaking fuel and brake lines with new stuff from Fine Lines. They’re direct replacements for the factory lines so you don’t have to spend time cutting and bending your own.

Fuel Line Kits
Fine Lines Fuel Line Kits are made from pre-bent T304 stainless steel tubing that follows the factory fuel line routing for easy installation. The lines are fitted with custom flared threaded fittings that cut down on your installation time. Summit Racing has Fine Lines Fuel Line Kits for popular domestic and import vehicles.

QuickFix Fuel Line Kits
A Fine Lines QuickFix Fuel Line Kit can save you three to four hours of installation time. They feature braided stainless steel fuel hose with factory-installed fittings and connections. The hose is divided into sections for easier installation, and they are secured at the factory clamp locations with the included clamps. Some kits come with an inline fuel filter.

Brake Line Kits
Most Fine Lines Brake Line Kits are made from T304 stainless steel. They are pre-bent and have factory-installed fittings and connections for easier installation. Fine Lines Brake Line Kits are available as complete front-to-rear; front-only, rear-only; and intermediate line configurations for classic and late model American vehicles.

Summit Racing also carries Fine Lines individual fuel lines, transmission cooler lines, and power steering hard line.

SEE FINE LINES FUEL AND BRAKE LINE KITS AT SUMMIT RACING

Give Your Big Block Chevy a Shot in the Horsepower Arm with a Summit Racing™ Pro BBC 4-7 Swap Hydraulic Roller Camshaft

With a dozen grinds to choose from, Summit Racing™ Pro BBC 4-7 Swap Hydraulic Roller Camshafts cover street performance, towing, and drag race applications. Made in the USA from billet bearing steel and finished on Landis grinders, the cams have a 4/7 firing order (1-8-7-3-6-5-4-2). This helps reduce vibration and bearing wear and improves combustion chamber cooling for reduced detonation. Changing the cylinder pairing from 5/7 to 4/2 can help you pick up more power in the midrange and a small amount up top with no other changes.

Diagnose Hidden Issues, Drill Perfect Rivet Holes, and Up Your Grinding Game with These New Tools from Summit Racing

Make some room in your toolbox—we have three new tools to make finishing your automotive projects quicker and easier. 

Summit Racing™ Inspection Cameras
See what’s going on inside your vehicle’s hard-to-reach areas with a Summit Racing™ Inspection Camera. The cameras feature 5-inch full color screens with 1280 x 720P HD quality resolution. Other features include:

• Use around the house for looking down drains, vents, behind walls, and more
• Dual lens
• Lighted
• Available with your choice of 39- or 195-inch long probes
• Protective storage case

Bring Your Classic Engine Up to Speed for Less with Summit Racing™ Forged Pro Pistons

Back in the day most manufacturers stuffed their engines with cast pistons. They were cheap to make and offered ‘good enough’ life for daily drivers. But adding high performance parts and spinning your engine to higher RPMs can spell doom for the stock cast slugs. That’s why your hi-po engine build needs Summit Racing™ Forged Pro Pistons.

Replace a Gauge Panel and Cover Your LS Engine’s Valvetrain with These Summit Racing Brand Products

Whether you have a classic truck, street machine, or race car, there’s always something that needs doing. Summit Racing’s new product brain trust has come up with these products to help jazz up a Chevy truck dash and  properly top a GM LS engine’s valvetrain.

Summit Racing™ Direct-Fit Restoration Instrument Bezels for Chevy/GMC Trucks
If the gauge bezel or panel in your classic GM truck has seen better days, replace it with a Summit Racing™ Direct-Fit Restoration Instrument Bezel. The instrument bezels are made from steel with a chrome-plated finish. The gauge panels are black plastic with chrome plating around the gauge bezels and outer panel.

Available Applications
• 1967-72 C10 gauge panel with chrome trim
• 1947-55 Chevy truck instrument bezel
• 1958-59 Chevy truck instrument bezel