New Product Releases

Add Emissions-Legal Horsepower to Your LS Engine with a COMP Cams FSL Series Camshaft

You can add 30 to 47 emissions-legal horsepower to your Gen III or Gen IV LS engine by swapping the stock camshaft for a COMP Cams FSL Series Camshaft. The 50-state legal (CARB E.O. #D-279-13) hydraulic roller cams require no valve spring updates or tuning required. Horsepower doesn’t get much easier.

COMP Cams FSL Series Camshafts are available for these engines:
• 1997-2015 Gen III/IV, three-bolt attachment
• 2007-15 LS2/LS3 Gen IV, single bolt attachment, no VVT or AFM
• 2005-14 LS2/LS3 Gen IV, single bolt attachment, with AFM but no VVT
• 2008-15 Gen IV, single bolt attachment, with VVT and AFM

CHECK OUT THE COMP CAMS FSL SERIES CAMSHAFTS FOR GM LS AT SUMMIT RACING

Protect Your Jeep’s Interior with Armorlite Flooring Products

Carpet doesn’t belong in off-road Jeeps. And spray-in liners leave the floors scorching hot and do nothing to reduce road noise. Enter Armorlite. Their proprietary, molded thermoplastic replacement flooring products engineered for a perfect fit, with extensive thermal and acoustical insulators to reduce noise, vibration, and harshness (NVH) and floor temperatures by up to 140 degrees F. Additional features include:

• Unique styling enhances the rugged look of your vehicle
• Protective top layer is scratch and mar resistant
• Structural layer provides the stiffness to maintain a perfect fit over the life of the vehicle
• Heat and noise layer provides thermal protection for the entire floor surface
• Built-in water channeling and drainage system
• Cleans easily with soap and water
• Mesa smoke finish

Add Up to 850 Horsepower to Your LS Engine with a FAST Supercharger and Cam Power Package

Adding up to 850 horsepower to your 1998-2014 GM LS is as easy as ordering a FAST Supercharger and Cam Power Package. The Power Packages are based on Edelbrock’s Eaton 2300 TVS supercharger with an integral dual-pass intercooler and a COMP Cams Low Shock Technology (LST) hydraulic roller camshaft with a supercharger-friendly profile. FAST even includes two supercharger pulleys—one for tuning and street performance and a smaller one for running on race gas or E85 at the track.

Enjoy Driving Your Classic Mustang Again with a Borgeson Power Steering Conversion Box

Driving a classic Mustang with manual steering was probably fine back in the ‘60s, but somewhat terrifying in modern traffic. You can make the drive more relaxing and easier on the nerves with a Borgeson Power Steering Conversion Box. They’re brand new, 14:1 quick-ratio steering boxes that provide better steering response and road feel. The boxes bolt in the factory mounting location and fit the stock manual steering linkage—no cutting or welding required.

Borgeson Power Steering Conversion Boxes are available for 1965-70 Mustang. If you’re updating a car with factory power steering, you’ll need either a drag link adapter or a manual steering center link.

SEE BORGESON’S POWER STEERING CONVERSION BOXES FOR MUSTANG AT SUMMIT RACING

Shod Your Truck or SUV with Kenda Klever Series Tires

Kenda Klever mud-terrain, rough-terrain, and all-terrain tires are worth a serious look. They’re designed with all of the features you want, but don’t require a second mortgage to buy. That’s a good deal all-around.

Rebuild Your Tired Ford Triton Engine with 2CarPros 2005 Ford 5.4L 3V Parts Combos

When the Triton 5.4L 3V engine in his 2005 Ford F-150 Lariat started making the telltale clattery noise that signals a failing variable cam timing (VCT) system, Ryan Lavacot of 2CarPros had a choice to make—rebuild an engine with 184,000 miles on the clock or get another truck.

Go Farther and Stay Powered with a Cascadia 4x4 VSS Solar Panel Kit

Take your camping, overlanding, and everyday charging experience to the next level with the Cascadia 4x4 VSS Solar Panel Kit. They work like this: the pe-cut, application-specific solar panels are hard-mounted to your vehicle’s hood. During daylight hours, they collect solar energy to deliver a constant flow of electricity to your vehicle’s battery(s). This allows you to run 12V accessories like lights, phone/laptop chargers, refrigerators, and other items without running the engine and without the fear of being stranded due to a low battery. 

Cascadia 4x4 VSS Solar Panel Kits feature panels made from rugged, multi-layer, marine-grade materials to withstand extreme environmental conditions and remain maintenance-free for years. They follow the contours of the vehicle hood for a seamless factory-like appearance. 3M neoprene foam and high-temperature VHB tape secure the panels without damaging the vehicle’s paint.

Cascadia 4x4 VSS Solar Panel Kits are completely plug-and-play and can be installed in as little as 1.5 hours. They are available for the following vehicles:

• 2009-2023 Dodge/RAM 1500-3500
• 2017-20 Ford Raptor
• 2007-23 Jeep Wrangler and Gladiator
• 1998-2007 Lexus LX470
• 2000-21 Nissan Frontier, Titan, and Xterra
• 1980-24 Toyota Land Cruiser, Tundra, and Tacoma

Cragar 61C S/S Special Backspace Wheels: Classic Cragar Style to Fit Your Custom Vehicle

The ever-helpful folks at Cragar have made it easier for custom car builders to fit a set of classic S/S wheels on their vehicles. The 61C S/S Special Backspace Wheels have unique backspace configurations to accommodate different custom chassis setups, widebody fenders, aftermarket axles that may change wheel positioning, and undercarriage clearances.

Cragar 61C S/S Special Backspace Wheels are available in these configurations:

Size       Bolt Pattern  Offset     Backspacing
15 x 7    5 x 4.75          +12mm   4.5"
15 x 8    5 x 4.50          +6mm     4.75"
15 x 8    5 x 4.75          +6mm     4.75"
15 x 8    5 x 4.75          +18mm   5.25"
15 x 10  5 x 4.5               0            5.5"
15 x 10  5 x 4.75             0            5.5"

CHECK OUT CRAGAR’S 61C S/S SPECIAL BACKSPACE WHEELS AT SUMMIT RACING

Improve Stopping Power for Your Classic Chevy or GMC Truck with a LEED Brakes Rear Disc Brake Conversion Kit

Swapping your 1963-98 GM truck’s rear drum brakes for disc brakes is a great way to improve its stopping power. It’s also easy thanks to LEED Brakes Rear Disc Brake Conversion Kits. The bolt-on kits include everything you need to do the swap:
• Solid or MaxGrip XDS cross-drilled/slotted iron rotors depending on application
• 54mm single piston calipers with semi-metallic pads and built-in parking brake
• Two-piece caliper mount lets you mount the caliper in one of three positions to clear aftermarket suspension components and frame modifications
• Adapters to install most stock and aftermarket parking brake cables
• Brake hose and required hardware

LEED Brakes Rear Disc Brake Conversion Kits are available for these trucks:
• 1963-74 C10, K10, and Suburban, five- and six-lug
• 1975-86 C10, K10, K5 Blazer, and Suburban
• 1983-90 S-Series pickup and 1983-91 S-Series Blazer
• 1988-98 C1500 and K1500, five- and six-lug

SEE LEED BRAKES REAR DISC BRAKE CONVERSION KITS FOR GM TRUCK AT SUMMIT RACING

Take Accurate Measurements, Remove Dents, and Loosen Stubborn Parts with These New Tools from Summit Racing

Gearheads are only as good as the tools they have. If you need to measure something to within .0001-inch accuracy or remove a dent, or loosen part on your vehicle, Summit Racing has the tools you need to get the job done. 

Summit Racing™ Outside Micrometer Sets
Take your car building skills to the next level with a Summit Racing Outside Micrometer Set. These precision instruments accurately measure the thickness or outside diameter of any small item. They are available in two versions: 

The Standard Grade Micrometer Set includes three micrometers with carbide steel tips to resist wear and corrosion. Each one features .001-inch graduations with ratchet stop actions. They also have heat-insulated frames and a satin-chrome finish. Readings can be made between 0-3 inches. A fitted case is included for storage. 

The Professional Grade Master Precision Micrometer Set features six durable, carbide-tipped micrometers with ratcheting handles and rugged enamel frames. They are accurate to within .0001 inches and can make readings between 0-6 inches. Includes a calibration wrench and a foam lined hard storage case.