Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
PLYMOUTH Parts and Accessories
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,382.99
Diamond Pistons Domestic Series Pistons
Diamond Pistons Domestic Series pistons are designed and tested for the high-stresses seen with high-compression, forced induction, or nitrous-fed domestic engines. Engineered with longevity, reliability, and strength, these forged aluminum pistons are specifically designed for your engine to deliver the results you demand. Diamond Piston Domestic Series pistons feature: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
( 2 )
$123.00
—
$150.00
KB Performance Pistons
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 136 )
$51.99
—
$141.92
Hughes Performance Pro-Street 30 Series Torque Converters
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$1,058.99
Hughes Performance Street Master Torque Converters
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 238 )
$625.99
—
$1,007.99
Hughes Performance XTM Heavy-Duty Towing Series Torque Converters
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$671.99
—
$787.99
Silv-O-Lite Cast Pistons
Silv-O-Lite quality cast pistons are manufactured from cast aluminum and then machined to produce a unique diamond finish, all to exacting skirt tolerances. These OE-type pistons are heat-treated and machined for strength and durability, tighter piston-to-cylinder wall clearances, and longer piston life.
( 53 )
$45.84
—
$135.24
Eagle H-Beam Connecting Rods
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 85 )
$131.99
—
$139.99
ATI Crank Trigger Shells
ATI now offers a custom crank trigger shell option, eliminating an additional pulley being bolted to your damper. If you already own an ATI Super Damper, you can just change the outer shell to the trigger. ATI can place any number of magnets in the outer shell at whatever degree marks you wish. These aluminum crank trigger shells will work with "Flying Magnet" pickups and other trigger sources. Order the model best suited for your application. Note: When placing your order, please have the desired quantity and location of magnets ready. Additional charges for extra magnets apply.
Not Yet Reviewed
$290.99
Silv-O-Lite Hypereutectic Pistons
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 76 )
$52.38
—
$138.69
On Sale
ICON FHR Series Pistons
ICON Pistons FHR (Forged Head Relief) Serie features VMS 75 alloy, true arc-style lock rings, broached pin holes, and breakthrough oil returns—all designed to be easy on your wallet! In addition, most flat-top, dish, and dome styles are available in an offset pin design, which will help to quiet those street motors. Sets with KTM after the product number will include piston rings. ICON FHR Series pistons are offered for a wide variety of specific make/model and engine applications.
( 11 )
$168.11
$151.30
OER Reproduction Emblems
OER reproduction emblems add a touch of authenticity to your GM or Mopar restoration. Many make reproduction parts, but OER emblems duplicate the quality, as well, to ensure that the finished parts meet or exceed factory specifications. And that means that the fit is perfect for a no-hassle install! These emblems are precise reproductions of the originals to complete your machine's interior and exterior, from grille to glove box to trunk, with a genuine OE appearance. Whether your special project is a Barracuda or Firebird, Super Bee or Super Sport, OER reproduction emblems will be your mark of a job well done.
( 176 )
$59.99
Hughes Performance Tow Master Series Torque Converters
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$596.99
—
$786.99
Hughes Performance Street Rod Torque Converters
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$776.99
Hughes Performance Street/Strip 35 Series Torque Converters
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$1,070.99
McLeod RXT Street Twin Clutch Kits
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$1,050.00
Hughes Performance Fuel Miser Torque Converters
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$626.99
—
$801.99
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G Independent Front Suspension Kits
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G independent front suspension kits are a comprehensive, bolt-in upgrade designed to replace the stock factory torsion bar suspension with a modern, high-performance, double A-arm front suspension system. Specifically engineered for 1970-1974 E-body vehicles, these kits improve handling and cornering using adjustable coilovers, rack-and-pinion steering, and Wilwood brakes. Key features: * Complete system: Hub-to-hub kit includes a new crossmember, tubular control arms, spindles, and power rack-and-pinion steering * Performance upgrades: Features QA1 adjustable coilover shocks and springs for height and ride tuning * Improved geometry: Designed to eliminate bump steer and allow for significant caster and camber adjustments * Braking: Comes standard with 11 in. Wilwood rotors and 4-piston calipers * Engine fitment: Accommodates Mopar small block, big block, and Gen 3 Hemi engines, usually requiring a rear-sump oil pan * The kit is tailored to bring modern handling capabilities to classic Mopar muscle cars, reducing unsprung weight and increasing overall torsional rigidity
Not Yet Reviewed
$7,623.00
Corbeau Sliding Seat Brackets
Corbeau sliding seat brackets are engineered to be direct bolt-ins on specific year/make/model vehicles. This means the bracket can use existing bolt holes in your floorboard, with little or no modification. These Corbeau sliding seat brackets are available in various configurations to accommodate hundreds of applications.
( 183 )
$139.00
—
$159.00
Optic Armor Oversized Formed Windows
Optic Armor oversized formed windows are highly scratch and chemical-resistant while being 50 to 75 percent lighter than glass. They are made from high-optical grade polycarbonate, making them virtually shatterproof, providing added durability as well as safety for the driver or operator. Products requiring a screen printed border are printed with a high-quality, permanent ink that will not flake or crack and gives the window a professional touch. Optic Armor offers many vehicle applications in a formed to factory curvature and their oversized windows allow for a cut-to-fit, flush-to-body install that is not only aerodynamic, but gives the installer the ability to create a custom look. Optic armor windows can be cleaned with standard glass cleaner.
( 7 )
$151.00
—
$270.00
Coverking Neosupreme Custom Seat Covers
Coverking Neosupreme custom seat covers are designed with the same exact specifications as the Coverking original CR-grade neoprene. You'll get that same sporty look and great cushiony feel with our popular Neosupreme seat covers--without the higher price! While not as thick or water-resistant as Neoprene, these covers still do the job and are great when you want a modern look for your active lifestyle. They are custom-manufactured specifically for your seat, and the soft-cushion insulation adds to the comfort of your ride.
( 1 )
$172.99
—
$216.99
ATI Streetmaster Torque Converters
ATI Streetmaster torque converters are commonly used to enhance bottom-end torque characteristics without sacrificing cruise efficiency. They generally provide an 800 to 1,000 rpm increase in stall speed when used with stock-type rear-end ratios and slightly modified manufactured engines.
Not Yet Reviewed
$678.99
ATI Treemaster Torque Converters
ATI Treemaster torque converters use all-new internal components that are designed to optimize efficiency and durability for each piece. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 2 )
$1,263.99
Ross Racing Forged Pistons
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including: * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversized valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications) * Balanced to +/- 2.5 grams * Aircraft-quality pins Hundreds of models are available, with bore, stroke, rod length, and piston style options to best suit your replacement or upgrade needs. Order the set compatible with your vehicle and engine application.
( 26 )
$131.99
—
$139.99
