FORD | Summit Racing

Holley Ford Mid-Mount Accessory Drive Systems

Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance

5.0 out of 5 stars ( 1 )

$2,599.95

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.07 out of 5 stars ( 135 )

$2,502.99

—

$2,876.99

On Sale

Summit Racing™ Turbocharger Replacement Kits

Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits

5.0 out of 5 stars ( 3 )

$2,341.92

$2,299.99

AFR 185cc SBF Renegade 20 Degree Street Heads

AFR 185cc SBF Renegade 20 Degree Street heads are ideal performance upgrades for 302-393 c.i.d. engines operating in the 6,000-6,500 rpm range. These cylinder heads feature ported intake runners, exhaust ports, and combustion chambers for street/strip use and feature high-quality aluminum construction, allowing for a weight-saving build. They include 8mm valve stems paired with 2.020 in. intake and 1.600 in. exhaust valves and feature available combustion chamber volumes of 58cc or 72cc, an exhaust port volume of 70cc, an intake runner volume of 185cc, and 3/4 in. deck thickness. For over thirty years, AFR has been engineering cylinder heads that deliver unmatched flow and power output. Manufactured with advanced porting technology, AFR heads are flow-tested and subjected to a rigorous quality control process to ensure maximum performance in all applications. Whether you pilot a top fuel dragster or a street machine, AFR has a set of cylinder heads designed for you. More product details, items, and notes include: * A356 aluminum construction * Stock intake and exhaust port locations * Perimeter bolt valve cover configuration * Angle mills may require a 0.120 in. thick intake gasket * Minimum cross-sectional area – 2.025 sq. in. * Spark plug dimensions - 14mm x 0.750 in. with gasket seat * Head bolt diameter – 1/2 in. * Do not use your AFR gasket as a template to port match your intake manifold as one AFR gasket is used for many AFR runner volumes * Designed for engines featuring stud- or pedestal-mount rocker arms; availability varies * These heads will not accept rail rocker arms * Hardened 5/16 in. pushrods with 0.120 in. wall thickness are required * Use full roller rocker arms; roller tip rockers with stock style bodies are not recommended * Boosted/nitrous and marine applications may require additional clearance; verify before final assembly

4.68 out of 5 stars ( 38 )

$2,126.99

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 51 )

$2,895.99

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.21 out of 5 stars ( 28 )

$2,149.95

—

$2,749.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.42 out of 5 stars ( 12 )

$2,099.95

—

$2,299.95

Ridetech Ford F-150 Suspension Lowering Kits

Ridetech Ford F-150 suspension lowering kits are front and rear packages offered for 4WD and 2WD models. They will lower your Ford up to 3 in. up front and 5.5 in. in the rear, turning your vehicle into a high performance muscle truck with better stance, handling, and ride quality. These Ridetech kits are 100 percent bolt-on, fully adjustable, and include everything you need to lower your Ford F150 platform. Features, benefits, and contents: * Lowered stance -- Adjustable ride height -- 3 in. front drop -- 5 in. rear drop * Improved ride quality and sharper handling * New tubular upper control arm provides camber and caster improvements at lower ride height to improve handling * Adjustable Ridetech/Fox shocks -- Coilover front/HQ Series rear -- Aluminum body -- Monotube/gas pressure -- Adjustable valving * Bolt-on installation -- No welding * Adjustable ride height -- Front coilovers adjustable spring seats -- Rear leaf shackles offer 2 in. of adjustment

3.67 out of 5 stars ( 3 )

$2,745.00

—

$2,745.99

AFR 165cc SBF Renegade 20 Degree Street Heads

For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.

4.57 out of 5 stars ( 28 )

$2,126.00

Trick Flow® Twisted Wedge 11R® Top-End Engine Kits for Small Block Ford

Tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a small block Ford, these kits will save you cash and take the guesswork out of building a winning engine combination. The Trick Flow® Twisted Wedge® 11R top-end engine kits are built around a set of dyno-proven Twisted Wedge® 11R 170 cylinder heads (TFS-52515301-C00). Also included is a Track Max® hydraulic roller camshaft (TFS-51403001), 1.6 ratio roller rocker arms (TFS-51400520), true roller timing chain set (TFS-51478520), chromoly pushrod set (TFS-21407050), cylinder head bolt kit (TFS-92005), and a complete engine gasket set (TFS-51400904). The test engine with these parts installed made 432 horsepower and 370 lbs.-ft. of torque on Trick Flow's® engine dyno!

3.8 out of 5 stars ( 5 )

$4,074.92

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.85 out of 5 stars ( 62 )

$2,795.95

—

$2,995.99

Ford Performance Parts 460 C.I.D. Siamese Bore Engine Blocks

Direct from Ford Performance Parts are these 460 c.i.d. Siamese bore racing blocks. Don't rely on finding that old junkyard engine when you can have one of these new 460 Siamese bore blocks for your ultimate power trip needs. Siamese blocks are solid castings between the cylinder bores to increase the strength of the blocks. Features include: * 10.322 in. deck height * Cast iron block with 4-bolt main caps on journals 2, 3, and 4 * Nodular iron main caps * Can be bored and stroked to produce 598 cu. in. * Available in standard (4.360 in.) or big bore (4.600 in.) versions * Wet sump oiling design * 3.000 in. main journal diameter * High-strength block for professional competition (circle track, drag racing) * No water passages between the cylinder bores * 4-bolt main caps require stock oil pan modifications * Weigh approximately 275-290 lbs.

5.0 out of 5 stars ( 1 )

$3,382.99

—

$3,402.99

Tremec T-56 Manual Transmissions

The kingpin of Tremec's high performance lineup, the T-56 Magnum double-overdrive 6-speed manual transmission, takes the very best from Tremec's current OEM technologies and pairs it with the most popular features of the TKO 5-speed. Known in its original equipment form as the 'TR-6060', the Magnum is an aftermarket version of the same transmission found in many of today's most celebrated factory super cars. Able to withstand a massive 700 lbs.-ft. of torque while providing unbelievably crisp shifts, no other manual transmission on the planet offers as much combined strength, versatility, and general ease-of-use as the T-56 Magnum. The units are available in a variety of gear ratios for different applications. Additional details: * The aftermarket's premier double overdrive 6-speed performance manual transmission * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more

4.2 out of 5 stars ( 10 )

$3,545.99

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

4.94 out of 5 stars ( 16 )

$2,549.99

—

$2,999.99

Wilwood Forged Dynalite Rear Parking Brake Kits

Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.

4.55 out of 5 stars ( 128 )

$2,404.36

TCI Super StreetFighter Transmission Packages

TCI Super StreetFighter transmission packages are the perfect solution for street cruisers who want excellent street performance and long-lasting durability. Intended for normally aspirated vehicles powered by engines producing between 725 and 1,025+ hp, depending on the application, the TCI Super StreetFighter packages feature the many of the same benefits as StreetFighter transmission packages with certain internal upgrades, including higher performance friction clutches and bands, as well as heavy-duty hard parts. The Super StreetFighter transmission offers both manual and automatic shift options to give you the power and shifts you want for the strip, or easy driving for the street. The packages include the torque converter with furnace-brazed fins, needle bearings, hardened pre-ground pump hubs, Max Shift street performance fluid, a dipstick, and transmission cooler. With a TCI Super StreetFighter transmission package installed, you'll be ready to take on the streets—and beyond!

5.0 out of 5 stars ( 2 )

$3,595.95

—

$4,295.95

TCI Competition Transmissions

TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!

3.32 out of 5 stars ( 31 )

$2,449.95

—

$3,395.95

Edelbrock Total Power Package 367 HP Small Block Ford Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.67 out of 5 stars ( 6 )

$3,617.95

AFR 205cc SBF Renegade Race Heads

If you're looking for the world's finest street/strip heads available, then AFR's 205cc Renegade Race cylinder heads are your answer. With lightweight 8mm 2.080 in. intake and 1.600 in. exhaust valves, these heads move tremendous volumes of air through conservative runner volumes, spelling big torque and horsepower numbers. AFR's trademark 3/4 in. thick head deck makes them ideal for heavy nitrous or blower applications. They even offer an available nitrous or blower exhaust port option featuring a 73cc ultra high-flowing exhaust port.

5.0 out of 5 stars ( 13 )

$2,753.00

—

$2,753.99

Edelbrock Total Power Package 321 HP Small Block Ford Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.27 out of 5 stars ( 22 )

$2,841.95

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kits

Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.

4.76 out of 5 stars ( 109 )

$2,163.71

—

$2,957.66

Ford Performance Parts 2021-23 Coyote 5.0L Control Packs

Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system

5.0 out of 5 stars ( 1 )

$2,322.99

—

$2,462.99

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

Ford Performance Parts Super-Duty T-5 Transmissions

Ford Performance Super-Duty T-5 transmissions are world class components for your hardcore street machine. Features include: * Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter * 300 ft./lbs. torque capacity * Double-moly 2nd speed, 3rd speed and countershaft cluster gears * Carbon-fiber 3-4 blocker rings * Improved synchronizers and bearings * 1-1/16 in. diameter 10-tooth input spline * 28-tooth output spline * 7-tooth speedometer drive gear * Cobra-style pocket bearing

4.24 out of 5 stars ( 34 )

$2,177.99

FORD Parts and Accessories