FORD Engines & Components

Holley Ford Mid-Mount Accessory Drive Systems

Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance

5.0 out of 5 stars ( 1 )

$2,599.95

Trick Flow® Twisted Wedge 11R® Top-End Engine Kits for Small Block Ford

Tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a small block Ford, these kits will save you cash and take the guesswork out of building a winning engine combination. The Trick Flow® Twisted Wedge® 11R top-end engine kits are built around a set of dyno-proven Twisted Wedge® 11R 170 cylinder heads (TFS-52515301-C00). Also included is a Track Max® hydraulic roller camshaft (TFS-51403001), 1.6 ratio roller rocker arms (TFS-51400520), true roller timing chain set (TFS-51478520), chromoly pushrod set (TFS-21407050), cylinder head bolt kit (TFS-92005), and a complete engine gasket set (TFS-51400904). The test engine with these parts installed made 432 horsepower and 370 lbs.-ft. of torque on Trick Flow's® engine dyno!

3.8 out of 5 stars ( 5 )

$4,074.92

AFR 165cc SBF Renegade 20 Degree Street Heads

For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.

4.57 out of 5 stars ( 28 )

$2,126.00

Ford Performance Parts 460 C.I.D. Siamese Bore Engine Blocks

Direct from Ford Performance Parts are these 460 c.i.d. Siamese bore racing blocks. Don't rely on finding that old junkyard engine when you can have one of these new 460 Siamese bore blocks for your ultimate power trip needs. Siamese blocks are solid castings between the cylinder bores to increase the strength of the blocks. Features include: * 10.322 in. deck height * Cast iron block with 4-bolt main caps on journals 2, 3, and 4 * Nodular iron main caps * Can be bored and stroked to produce 598 cu. in. * Available in standard (4.360 in.) or big bore (4.600 in.) versions * Wet sump oiling design * 3.000 in. main journal diameter * High-strength block for professional competition (circle track, drag racing) * No water passages between the cylinder bores * 4-bolt main caps require stock oil pan modifications * Weigh approximately 275-290 lbs.

5.0 out of 5 stars ( 1 )

$3,382.99

—

$3,402.99

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

4.94 out of 5 stars ( 16 )

$2,549.99

—

$2,999.99

AFR 185cc SBF Renegade 20 Degree Street Heads

AFR 185cc SBF Renegade 20 Degree Street heads are ideal performance upgrades for 302-393 c.i.d. engines operating in the 6,000-6,500 rpm range. These cylinder heads feature ported intake runners, exhaust ports, and combustion chambers for street/strip use and feature high-quality aluminum construction, allowing for a weight-saving build. They include 8mm valve stems paired with 2.020 in. intake and 1.600 in. exhaust valves and feature available combustion chamber volumes of 58cc or 72cc, an exhaust port volume of 70cc, an intake runner volume of 185cc, and 3/4 in. deck thickness. For over thirty years, AFR has been engineering cylinder heads that deliver unmatched flow and power output. Manufactured with advanced porting technology, AFR heads are flow-tested and subjected to a rigorous quality control process to ensure maximum performance in all applications. Whether you pilot a top fuel dragster or a street machine, AFR has a set of cylinder heads designed for you. More product details, items, and notes include: * A356 aluminum construction * Stock intake and exhaust port locations * Perimeter bolt valve cover configuration * Angle mills may require a 0.120 in. thick intake gasket * Minimum cross-sectional area – 2.025 sq. in. * Spark plug dimensions - 14mm x 0.750 in. with gasket seat * Head bolt diameter – 1/2 in. * Do not use your AFR gasket as a template to port match your intake manifold as one AFR gasket is used for many AFR runner volumes * Designed for engines featuring stud- or pedestal-mount rocker arms; availability varies * These heads will not accept rail rocker arms * Hardened 5/16 in. pushrods with 0.120 in. wall thickness are required * Use full roller rocker arms; roller tip rockers with stock style bodies are not recommended * Boosted/nitrous and marine applications may require additional clearance; verify before final assembly

4.68 out of 5 stars ( 38 )

$2,126.99

Edelbrock Total Power Package 321 HP Small Block Ford Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.27 out of 5 stars ( 22 )

$2,841.95

AFR 195cc SBF Competition Cylinder Heads

AFR 195cc SBF competition cylinder heads feature 100 percent CNC-machined intake ports, exhaust ports, and combustion chambers. Manufactured in A356 aluminum and assembled with high-quality components, these AFR 195cc SBF competition heads are recommended for displacements up to 408 cu. in., and operating up to 6500-6800 rpm. They are not compatible with OEM pistons. They are available with or without EGR and air pump, as well as with either 58cc or 72cc chamber sizes. Components for these AFR cylinder heads include: * Competition 5-angle valve job * 8mm bead lock intake valve * 8mm bead lock exhaust valve * PAC racing spring 1.270 in. O.D. hydraulic roller dual valve spring; 155 lbs. on seat, .650 in. maximum lift, maximum rpm 7000 to 7200 * 7 degree chromoly retainers * 7 degree bead lock valve keepers * 7/16 in. rocker studs * Adjustable 5/16 in. guide plates * Viton® valve seals * Hardened valve spring I.D. locator * Ductile iron intake valve seats 2.131 in. O.D x 1.680 in. I.D x .375 in. deep * Ductile iron exhaust valve seats 1.650 in. O.D x 1.350 in. I.D x .375 in. deep * Bronze valve guides * Air injector reducer bushing

4.33 out of 5 stars ( 3 )

$2,691.00

Holley Ford 7.3L Godzilla High-Mount Accessory Drive Complete Kits

Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.

Not Yet Reviewed

$2,699.95

—

$3,199.95

AFR 205cc SBF Renegade Race Heads

If you're looking for the world's finest street/strip heads available, then AFR's 205cc Renegade Race cylinder heads are your answer. With lightweight 8mm 2.080 in. intake and 1.600 in. exhaust valves, these heads move tremendous volumes of air through conservative runner volumes, spelling big torque and horsepower numbers. AFR's trademark 3/4 in. thick head deck makes them ideal for heavy nitrous or blower applications. They even offer an available nitrous or blower exhaust port option featuring a 73cc ultra high-flowing exhaust port.

5.0 out of 5 stars ( 13 )

$2,753.00

—

$2,753.99

Edelbrock Total Power Package 418 HP FE Ford Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

3.63 out of 5 stars ( 8 )

$3,519.99

BluePrint Engines Accessory Drive Systems

BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.

4.0 out of 5 stars ( 1 )

$2,199.99

—

$2,299.99

Edelbrock Total Power Package 367 HP Small Block Ford Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.67 out of 5 stars ( 6 )

$3,617.95

AFR 220cc SBF Renegade 20 Degree Competition Heads

AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.

4.92 out of 5 stars ( 12 )

$2,871.00

—

$2,871.99

Edelbrock Total Power Package 451 HP 351W SB Ford Performer RPM Top-End Engine Kits

Edelbrock Total Power Package 451 hp 351W SB Ford Performer RPM top-end engine kits supply you with great all-in-one-box performance. Removing the guesswork and the hassles, these dyno-tested combinations provide just about everything you need to top off your engine. Edelbrock Performer RPM top-end kits deliver improved performance in street applications in the 1,500 to 6,500 rpm range. They include either a Performer RPM or RPM Air-Gap intake manifold, Performer RPM cylinder heads, pushrods, hydraulic cam and lifters, timing chain (in most cases), complete bolt kits, and an Edelbrock gasket set. To get great performance out of any engine, all the components must work together. Edelbrock has solved the parts-matching puzzle for you with their Total Power Packages.

Not Yet Reviewed

$4,512.95

Trick Flow® PowerPort® 325 Cylinder Heads for Ford 429/460

Trick Flow® PowerPort® 325 cylinder heads for Ford 429/460 engines deliver significant horsepower and torque gains over other similar-style cylinder heads. Notable features include an extremely efficient chamber design for more complete combustion and exhaust ports raised .270 in. from stock for increased airflow. Trick Flow® PowerPort® 325 heads also feature Trick Flow's® CNC Competition Ported runners and CNC-profiled combustion chambers. These premium high-resolution surface finishes are perfect for building maximum performance. Trick Flow® PowerPort® 325 cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 5 )

$2,059.99

—

$2,109.99

AFR 195cc SBF Renegade Competition Cylinder Heads

Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.

5.0 out of 5 stars ( 2 )

$2,691.00

—

$2,691.99

Eagle Competition Rotating Assemblies

Eagle competition rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Depending upon your selection, these kits may feature a crankshaft, pistons, piston rings, rod and main bearings, or connecting rods. Balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.54 out of 5 stars ( 35 )

$2,599.99

—

$2,956.99

March Performance Style Track Serpentine Systems

March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.

3.98 out of 5 stars ( 58 )

$2,095.00

—

$3,045.00

Ford Performance Parts Gen 3 Predator Cylinder Heads

Ford Performance Parts Gen 3 Predator cylinder heads are improved high-performance castings, providing added strength and increased size of the central cooling passages to support higher horsepower engine builds. Features: * Fully CNC ported intake ports, exhaust ports and combustion chamber * Larger port sizing than the 2015-17 5.0L Coyote cylinder heads * 38.3mm intake valve and 32.5mm exhaust valve * New valvetrain geometry allows for higher valve lift * Lightweight hollow-stem intake valves and sodium-filled exhaust valves * Stiffer exhaust valve springs * Upgraded valve guides * Upgraded exhaust valve seat * Loaded head assembly minus camshafts, rocker arms, and lash adjusters

Not Yet Reviewed

$2,189.99

Vintage Air Ford Front Runner Engine Drive Systems

Vintage Air offers their totally cool Front Runner engine drive systems for your small block Ford! With a unique design focused on performance, Vintage Air Ford systems are strong, compact, and extremely good looking. They feature a patented, one-piece, forged aluminum timing cover with integral accessory mounts and utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation. Systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air Ford Front Runner engine drive systems may include: * ARP stainless 12-point bolt and hardware * 170 amp alternator * Dayco OEM tensioner * Timing cover gasket set * Dayco serpentine drive belt * Power steering pump * 4-bolt crankshaft pulley * High performance water pump * Water pump pulley * Power steering pump pulley

4.73 out of 5 stars ( 11 )

$3,157.99

—

$3,184.99

Scat Engine Rotating Assemblies

Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.

4.26 out of 5 stars ( 136 )

$2,029.99

—

$2,977.99

Edelbrock E-205 Cylinder Heads

You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.

3.5 out of 5 stars ( 2 )

$2,168.95

—

$2,274.95

BluePrint Engines Small Block Ford Compatible 302 Windsor Bare Engine Blocks

If you're ready to take your Ford small block to the next level, BluePrint Engines Small Block Ford Compatible 302 Windsor Bare Engine Blocks provide a rock-solid foundation your build deserves. Engineered to support stroker combinations up to 363 cubic inches, they deliver the strength, stability, and precision machining today's high-output Ford builds demand. Thick cylinder walls, reinforced casting, and smartly designed oiling pathways make them the ideal starting point for everything from a crisp street performer to a full-tilt track or autocross machine. Whether your vision is naturally aspirated punch or boosted aggression, BluePrint Engines Windsor based bare blocks give your project the durability and confidence to handle big power with classic Ford attitude. They are ideal for high-performance street, strip, or racing applications, providing a stronger foundation than original Ford cores. Key features and specifications: * Material: High-strength cast iron (EN-GJL-250) designed with thicker cylinder walls and significantly reinforced webbing compared to stock Ford blocks * Design: 4-bolt main caps (billet steel) and improved, thicker webbing, which allows for higher horsepower capacities without cracking * Dimensions: 8.200-inch deck height, 4.000-inch bore (can be bored further, with some versions supporting up to 4.125-inch or 4.165-inch max bore) * Suitability: Optimized for 302-based stroker combinations up to 363 cubic inches * Oiling System: Features priority main oiling for improved lubrication * Main Seal: 1-piece rear main seal design * Accommodates hydraulic roller cams, factory-style roller lifters, and standard timing covers (not included)

Not Yet Reviewed

$2,599.00

—

$2,899.00