Availability
Showing In Stock Items. Show All 735 Items.
Summit Bucks
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 339 )
$105.99
—
$191.99
The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic. When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a "service axle locker" message and the lockers will no longer engage. The repair would normally be to replace the sensor or the locker assembly, but they are not available, so the entire axle assembly needs replaced. Developed in a partnership with Americas Most Wanted 4X4, Z Automotive Jeep JL/JT Z-Locker OEM controller harnesses provide a simple fix for faulty OEM axle locker. Each harness will bypass the problematic sensor, allowing the locker to operate without the position sensor and provide the proper feedback to the Jeep's computers to keep the system operational without any errors or warnings. You get fully functioning lockers with no side effects. Installation is simple and they will not harm the Jeep's computers as they use the same signaling that it expects from the sensor. The connectors are the same ones used by Jeep and are watertight.
( 29 )
$179.00
Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction, while their large knobs and open tread pattern can cause your front end to wander on or off the road. Fox 2.0 Performance Series IFP (internal floating piston) stabilizers use advanced damping technology to tame steering feedback from even the most aggressive tires. Features include: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Clear anodized finish * IFP monotube reservoir design separates stabilizer oil from high-pressure nitrogen * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Shaft is 5/8 in. hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Valving is application specific to maximize performance * Redundant sealing pack system: main seal, wiper seal, and scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation
( 26 )
$229.95
McGard lug nut installation kits contain everything you need to mount your wheels. McGard lug nut installation kits include Tough Nuts, which are guaranteed for life not to rust, chip, or peel! Also included are four wheel locks, one wheel lock key, and a storage pouch. With McGard lug nut installation kits, you get all of the high-quality parts you need in one package!
( 134 )
$112.99
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control—on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model. Additional features: * 2 in. seamless extruded tube * 14mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm Bilstein digressive piston * Self-adjusting, deflective-disc independent rebound and compression
( 1406 )
$118.00
Bilstein B8 5100 Series steering stabilizers feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. Their patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control--on and off the road.
( 267 )
$115.00
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 99 )
$188.99
—
$228.99
Air Lift Load Controller II systems not only give you everything you need to install air springs on your ride, but you also give you Air Lift's low-pressure sensor. If the air pressure in your springs drops below 5 or 10 psi, the sensor will detect the drop, and kick the compressor on--automatically. You can watch it happen on the dash-mounted pressure gauge. The kits also have an onboard air compressor, air lines that will inflate or deflate at the touch of a button, plus all wiring, hardware, and installation instructions. They're recommended for trucks, vans, and SUVs.
( 24 )
$228.99
On Sale
WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.
( 11 )
$161.95
—
$201.95
$145.76
—
$181.76
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 611 )
$113.99
Fox 2.0 shocks are available for a wide range of applications—including hundreds of Chevy, GMC, Ford, Jeep, Dodge, Ram, and Toyota trucks from the 1950s and up. These IFP (internal floating piston) replacements will upgrade the on-road comfort and off-road control of your vehicle. The monotube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration, allowing maximum performance from the factory-tuned, precision valving. FOX and BDS joined forces to custom valve each model to work perfectly with each BDS Suspension system. They're based on FOX race products but re-designed to turn your BDS-equipped truck into an off-road machine providing a predictable ride capable of handling the roughest conditions with fade-free performance. The shocks are available in a variety of extended and collapsed lengths—for fitment on trucks with zero to 8 in. of lift. Additional details: * 2 in. impact extruded and CNC-machined 6061-T6 clear anodized aluminum one-piece body resists rust over time * 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Internal IFP monotube reservoir design
( 3 )
$199.95
Nitto NT 420V tires are designed as the perfect complement to your luxury truck or SUV's aesthetics. The eye-catching asymmetrical tread pattern creates two distinct zones for both dry handling and wet performance, while also enabling cross-rotation for longer tread life—making them high performance, attention-grabbing tires that are a great choice year-round. Nitto NT 420V tires are available in many popular OE and plus sizes, including LT-metric sizes for 3/4 to 1 ton trucks. Features and benefits: * Large outer tread blocks increase the amount of road contact surface area, improving cornering grip and performance in dry conditions * Asymmetric sipe and groove count, combined with a variable pitch tread block design, work together to reduce annoying noise frequency peaks * Two wide circumferential grooves channel water away from the tread blocks, while the high number of inner lateral grooves provide biting edges for wet traction
( 18 )
$186.00
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
On Sale
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 107 Classic Rally Series silver wheels (available in 5 and 6-lug bolt patterns.) They'll amp up your ride's aesthetics with some old-school charm in a classic 5-slot design that is sure to look great on both old and new rides! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series polished rims designed to fit your application! More product features include: * Silver center with a machined lip that looks like a trim ring * Larger sizes for improved appearance and to fit modern tires * Clear-coated finish for improved durability and easy cleaning * All original factory GM cap styles (available separately) fit the 107 * Looks great with Derby, Police, or Disc Brake center caps (sold separately)
( 5 )
$240.95
$179.95
—
$216.85
When 5-spoke wheels originated, they were steel rims with a chrome finish. Eventually they were also available in aluminum. Ridler 695 Series wheels reveal how a bit of modern technology can enhance a classic style. These one-piece aluminum wheels have a gloss gray powdercoat finish, with a machined lip and outer edge for elegant 2-tone style. They're lighter than the retro originals—and since there's nothing to rust, the wheels will continue looking great for years. Order excellence to stand the test of time—Ridler 695 Series gloss gray with machined lip wheels.
( 10 )
$183.99
—
$207.92
Mickey Thompson updates a retro style with their Classic III black wheels. A great look for your rig, trailer, or toy hauler, these clearcoated satin black wheels offer a high load rating and a greater number of fitments to give your ride a rugged stance. The Classic III wheels feature an old-school, 8-hole design with a smooth outer lip, and a non-corrosive, 2-tone, screw-on center cap. The wheels are finished with a deeply embossed Mickey Thompson logo for added appeal. They're available in a variety of widths, diameters, bolt patterns, and other fitment options.
( 11 )
$240.99
Fox Racing Shox 2.0 Performance Series IFP smooth body shocks deliver race-dominating performance in a hassle-free bolt-on package. Their heat-reducing design includes a metal-impacted aluminum shock body that dissipates heat faster than conventional steel. Inside, the Internal Floating Piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, providing a predicable ride quality capable of handling the roughest road conditions. Combine these new technologies by Fox Racing Shox, together with a competitive price—and you have a winning combination! Choose the universal or vehicle-specific model that best suits your application. Tech specs of 2.0 Performance Series IFP smooth body shocks: * Aluminum shock body dissipates heat, will resist rust over time * Clear-anodized for a durable finish * Application-specific valving to maximize off-road performance * Components: black anodized billet aluminum * Shaft: hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Quiet nitrile rubber bushings for increased suspension articulation * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Extended length applications available for stock and aftermarket lifts kits * Optional roost shield kit available (sold separately) to protect shock shaft and seals from rocks kicked up by tires Adjustments: * Nitrogen pressure * Compression valving * Rebound valving
( 63 )
$229.95
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$231.99
—
$235.99
Simple, traditional, and steel--that's Vision HD 85 Soft 8 Series black wheels. These 2-piece steel wheels have the strength that you need to roll through the wilderness and back onto the pavement in classic style. With higher load ratings available, these wheels are available in 15 in. and 16 in. diameters to keep you moving anywhere you travel. These extremely popular black gloss painted wheels sport a familiar 8-window design that's timeless and rugged. And, even better, our wheel prices are hard to beat! Traditional style, the strength of steel, and great value make Vision Wheel 85 Soft 8 Series wheels simply the best choice.
( 158 )
$106.99
—
$133.99
McGard spline drive lug nut installation kits offer you choices to match your style. You can coordinate, complement, or contrast--it's your choice! Everything you need to install your wheels is included in these high-quality McGard spline drive lug nut installation kits. Show your individuality with a variety of colors and styles. Imagine the possibilities with McGard spline drive lug nut installation kits.
( 47 )
$178.99
Instant Rebate
Get the extra clearance you need with these TeraFlex Jeep wheel offset adapters. TeraFlex knows that many people want to run oversized tires and need extra clearance--that's why they came up with these adapters. These adapters are fully machined and come complete with pressed-in wheel studs and spacer lug nuts. You can choose to use your factory bolt pattern or alternate patterns and gain much-needed clearance at the same time. Get back out on the trail, where you know you belong, with TeraFlex and these Jeep wheel offset adapters.
( 7 )
$119.03
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 101 )
$225.99
Voxx Nova gloss black wheels bring a bit of classical design with a hint of luxury to your vehicle. Built from lightweight aluminum and featuring a one-piece cast construction, Nova wheels feature a mesh spoke design. Light in weight, but retaining their optimal load retention, the edgy design of these Voxx wheels compliment any passenger, tuner, or SUV.
( 1 )
$189.99
—
$211.99
Ridler 610 Series gloss gray wheels with polished lip are part of their Street Series lineup. At Ridler, they design to capture the perfect style of for hot rods, resto-mods, classics, modern muscle, and much more. These wheels are available in a variety of diameters, widths, and wheel bolt patterns. Dip into the deep roots and passion of car culture with the Ridler 610 Series gloss gray wheels best suited for your application.
Not Yet Reviewed
$152.99
—
$154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
