Availability
Showing In Stock Items. Show All 522 Items.
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
—
$2,049.95
AMP Research PowerSteps are full length automatic electric-powered running boards that instantly extend when you open your door, and then hide themselves safely out of sight when the doors close for improved ground clearance, aerodynamics, and appearance. And their attractive design and legendary reliable, all-weather performance sets a new industry standard. Features include: * High-strength, diecast aluminum-alloy linkage arms, anodized and PTFE coated to resist corrosion * Precision, zero-maintenance stainless-steel pivot pins * Extruded aluminum steps with a textured powdercoated finish for maximum grip and durability * Weatherproof, OEM-quality electric motors and wiring harness with sealed weathertight connectors * AMP-designed electronic controller employs pressure-sensitive, pinch-proof safety technology * Integrated LED light system (standard) * 600 lbs. load capacity (each side)
( 83 )
$1,599.99
March Performance Chevy LS Series serpentine kits offer an exciting new look when mounting an accessory drive in your vehicle. They're designed for vehicles that do not have air conditioning. The driver side features a remote power steering pump with an attractive aluminum cover, while the passenger side has March's own billet alternator (except where noted). An OEM-style tensioner ensures perfect belt tension. All pulleys and brackets are CNC-machined from 6061-T6 aluminum for strength and perfect fit—and hard-coated on high wear areas for durability. Order the kit recommended for your vehicle. LS Series kits include: * Aluminum water pump * March billet alternator (except where noted) * Alternator pulley with fan * Water pump pulley with nose cover * Alternator bracket * Polished spring-loaded belt tensioner with cover * Crank pulley (required adapter sold separately) * Mounting hardware Kits with power steering include: * Type 2 remote power steering pump * Billet pump case * Power steering pulley with nose cover * Mounting hardware
( 1 )
$1,694.99
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,933.50
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.
( 1 )
$1,539.98
Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.
( 101 )
$2,155.71
—
$2,217.04
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,806.00
—
$2,151.99
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 28 )
$1,926.60
Oliver Speedway Series connecting rods are designed for severe applications where engines are subject to high-rpm endurance racing or high loads over a wide variation in rpm. These rods are often used in large cubic inch late model dirt cars and forced-induction applications. All Oliver rods are precision-machined using only premium mill-certified aircraft quality E4340 chromoly alloy, heat-treated to produce a 100 percent martensite grain structure. The I-beam connecting rods feature an exclusive "Parabolic Beam" design that reduces beam stress and delivers the highest strength-to-weight ratio of any connecting rod currently made. Oliver Speedway Series connecting rods provide quality craftsmanship, materials, and processes to deliver the ultimate durability and strength—allowing you to push the limits. Order the length needed for your vehicle and engine application.
( 6 )
$1,599.97
—
$1,666.00
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 537 )
$1,893.99
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
RideTech TruTurn StrongArms packages are upgraded control arm systems that include tubular StrongArms, tall ball joints, Delrin bushings, and tie rods. What can you expect from these systems? Resolved bump steer and camber gain issues. Your tires will lean into the turn, the bump steer is optimized to under 0.065 in. through 5 in. of suspension travel, and you have the clearance to run up to a 275mm tire. These packages are available for hundreds of vehicles; order the kit recommended for your application. Features: * Taller upper ball joints to increase camber gain * Integrates with OEM spindles * Centers the wheels in the wheelwell with increased caster settings * Includes upper and lower StrongArms, outer tie rods, and billet tie rod adjusters
( 2 )
$1,775.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,576.75
RideTech RidePro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
Not Yet Reviewed
$1,620.00
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 930 )
$1,733.99
—
$1,891.99
Summit Racing™ Max EFI LS 750 fuel injection systems are efficient, self-tuning kits for your LS engine. These multi-port systems combine an aluminum intake manifold available in two profiles and port sizes, transmission control, and either a 92 or 102mm billet aluminum throttle body. The systems are available in two finishes and are timing control and power added compatible. Fire up the performance of your LS engine with our Summit Racing™ Max EFI LS 750 fuel injection systems. Select the kit with the specs and finish desired for your LS-based engine. Features: * 4.4 in. color touch screen hand-held controller * Multi-port fuel rails * 55 lbs./hr. injectors * Plug-and-play wiring harness * Calibration module * Oxygen sensor * MAP sensor * Tall or short manifold profile * Cathedral or rectangle port * 92mm or 102mm diameter throttle body * Black or natural finish
Not Yet Reviewed
$1,999.99
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$1,529.96
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
As part of the number one choice for custom suspension systems, QA1 Proma Star single adjustable coilover systems are available in several lengths, making them easy to fit in almost any situation. Both the double-adjustable versions and these single-adjustable models allow you to set your valving to fit your driving style, so you are ready to hit the road, nearest racetrack, or anywhere in between. Get that perfect stance with adjustable ride height when you order the QA1 Proma Star single adjustable coilover systems best suited for your application. Other product features include: * On-the-car adjustable valving makes it quick and easy to dial in your desired level of comfort and performance * Shocks feature a 2 in. body diameter and can be mounted in any orientation * Spring mounting hardware designed for coil springs with a 2 1/2 in. inside diameter * Alternative mounting options available to fit your custom chassis * 100-percent dyno tested and serialized * QA1 single-adjustable shocks are designed for performance street driving, autocross, and lower-powered drag racing (rear only) * All QA1 single-adjustable shocks feature simultaneous compression and rebound adjustment on one knob (18 positions)
( 2 )
$1,552.95
ATK High Performance Chevy LM7 5.3L short blocks are assembled with OE flat top pistons and offer these engine specifications: * Seasoned 5.3L LM7 block * 1999-2007 year range * Bore/stroke: 3.810 in. x 3.622 in. * Displacement: 330 cu.in * OEM GM 24-tooth reluctor wheel crankshaft * OEM GM forged powder metal rods * Stock hypereutectic flat top pistons with two valve reliefs * Compression ratios: 61cc = 9.8:1/64cc = 9.5:1/68cc = 9.1:1 -- Can vary due to deck height/gasket thickness * Plasma moly rings * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed
Not Yet Reviewed
$2,043.99
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 93 )
$1,899.95
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,816.95
—
$1,994.95
Dial in your ideal ride quality with the independently adjustable compression and rebound valving of QA1 Proma Star double adjustable coilover systems. They offer the perfect balance of street-ability and performance and are an ideal choice if you plan to use your car on the road and occasionally take it to the track. With QA1 Proma Star double adjustable coilover systems you will improve overall handling, increase suspension tunability, and gain the ability to adjust ride height quickly and easily for a perfect stance and corner balance your car, maximizing performance. They are easy to install with basic hand tools in the factory mounting locations and does not require the use of a toe link relocation kit. Coilovers are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering, and providing a more planted feel.
( 3 )
$1,767.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
