2004 Engines & Components

Edelbrock Performer Cylinder Heads

All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.

3.88 out of 5 stars ( 41 )

Trick Flow® GenX® 280 Cylinder Heads for GM LS3

Not Yet Reviewed

Trick Flow® GenX® 225 Cylinder Heads for GM LS2

Trick Flow GenX® 225 cathedral port cylinder heads are fully CNC-machined to significantly increase the performance of 6.0L LS2 engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 225 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 3 )

COMP Cams HRT Max Power Master Camshaft Kits

COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)

4.4 out of 5 stars ( 5 )

March Performance Chevy LS Series Serpentine Kits

March Performance Chevy LS Series serpentine kits offer an exciting new look when mounting an accessory drive in your vehicle. They're designed for vehicles that do not have air conditioning. The driver side features a remote power steering pump with an attractive aluminum cover, while the passenger side has March's own billet alternator (except where noted). An OEM-style tensioner ensures perfect belt tension. All pulleys and brackets are CNC-machined from 6061-T6 aluminum for strength and perfect fit—and hard-coated on high wear areas for durability. Order the kit recommended for your vehicle. LS Series kits include: * Aluminum water pump * March billet alternator (except where noted) * Alternator pulley with fan * Water pump pulley with nose cover * Alternator bracket * Polished spring-loaded belt tensioner with cover * Crank pulley (required adapter sold separately) * Mounting hardware Kits with power steering include: * Type 2 remote power steering pump * Billet pump case * Power steering pulley with nose cover * Mounting hardware

5.0 out of 5 stars ( 1 )

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.62 out of 5 stars ( 107 )

March Performance Narrow Mount Chevy Serpentine Pulley Kits

March Performance has created a solution for mounting accessory components on the popular Chevy LS motors where low hood clearance and narrow frame clearance is required. Precision CNC-machined from 6061 T-6 aluminum for strength and a perfect fit, pulley kit components are hard coated on high-wear areas for durability and powdercoated for a maintenance-free finish. An OEM-style tensioner ensures perfect belt tension and a canister-style power steering pump provides compact hydraulic pressure for power steering.

1.0 out of 5 stars ( 2 )

Callies Ultra Connecting Rods

Callies Ultra connecting rods are made with pride to exacting specifications. They are produced from extremely clean Timken steel, meticulously crafted with great attention to detail. If you choose Callies Ultra connecting rods, be confident of dependable performance and outstanding workmanship.

Not Yet Reviewed

Holley LS Engine Swap Accessory Drive Systems

Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today

3.88 out of 5 stars ( 34 )

Edelbrock E-Street Cylinder Heads

Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.

4.29 out of 5 stars ( 119 )

Summit Racing™ Pro LS Crank and Rod Kits

Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.

4.0 out of 5 stars ( 1 )

Manley Pro Series Crankshafts

Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.

4.91 out of 5 stars ( 11 )

Oliver Speedway Series Connecting Rods

Oliver Speedway Series connecting rods are designed for severe applications where engines are subject to high-rpm endurance racing or high loads over a wide variation in rpm. These rods are often used in large cubic inch late model dirt cars and forced-induction applications. All Oliver rods are precision-machined using only premium mill-certified aircraft quality E4340 chromoly alloy, heat-treated to produce a 100 percent martensite grain structure. The I-beam connecting rods feature an exclusive "Parabolic Beam" design that reduces beam stress and delivers the highest strength-to-weight ratio of any connecting rod currently made. Oliver Speedway Series connecting rods provide quality craftsmanship, materials, and processes to deliver the ultimate durability and strength—allowing you to push the limits. Order the length needed for your vehicle and engine application.

5.0 out of 5 stars ( 6 )

Pacific Performance Engineering CNC-Ported LLY/LBZ/LMM Cast Iron Cylinder Heads

PPE's CNC-ported LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine to eliminate any head gasket or cracking concerns. Cast from high-quality alloyed gray iron, the PPE cylinder heads offer elevated fatigue strength, heat, and creep resistance, which prolongs the cylinder head's lifespan significantly. The cylinder heads also share the same heat expansion rate as the stock cast-iron cylinder block—no more blown head gaskets! PPE's CNC-porting process improves airflow, enhancing power, fuel efficiency, and throttle response while reducing engine stress and turbo lag. By smoothing the ports and maintaining wall thickness, these heads provide increased horsepower and torque without sacrificing reliability. Tailored to each specific head, the CNC machining compensates for casting variations, ensuring consistent and optimized airflow dynamics. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, cast iron cylinder heads from Pacific Performance Engineering are undoubtedly the best choice. Product features: * Specially alloyed gray cast iron liquid-cooled cylinder head * 5-Axis CNC-ported intake and exhaust ports for smooth, unrestricted airflow * Increased thermal efficiency compared to aluminum heads * Reduced noise and vibration, better ride * Eliminates head gasket scrubbing issue (blown head gasket) * Higher fatigue strength and heat resistance * Premium 21-4N, Stellite-reinforced exhaust valves * Fully nitridated valves, better abrasion resistance * Ready to install—comes with all valvetrain components, rocker arm dowels, and freeze plugs * Requires the use of LBZ/LMM glow plugs on LLY engines (sold separately) Important Notes: The valve seats of the PPE heavy cast iron cylinder heads are installed with an interference that maximizes the durability and lifespan of the cylinder heads. Such interference might not be optimal for extreme-performance applications where a significant amount of heat is created. For those applications, PPE suggests that the exhaust valve seats be replaced with higher interference (+0.006 in. to +0.008 in.) oversized exhaust valve seats (Nominal size 34mm).

Not Yet Reviewed

Summit Racing™ Precision Cast Cylinder Head

Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!

4.0 out of 5 stars ( 19 )

Billet Specialties Smooth Modular Valve Covers

Billet Specialties smooth modular valve covers offer a clean high-tech style to your modern LS engine. They feature hidden coils and wire harness, as well as a hidden oil filler cap, creating a smooth appearance. Finished with stainless steel ARP 12-point fasteners that match their other engine accessories, your LS engine will be the center of attention. Billet Specialties smooth modular valve covers are available polished or black anodized.

Not Yet Reviewed

March Performance Sport Track Ultra All-Inclusive Chevy Serpentine Pulley Kits

Rubber V-belts were first introduced into automobiles back in 1917—and it took over 60 years to find a suitable replacement. March Performance Sport Track Ultra all-inclusive Chevy serpentine pulley kits are the perfect upgrade for lower performing V-belt pulleys. Serpentine belts are more efficient, thicker, reduce slippage, and last longer—and since they use just one tensioner, all the components can be solidly mounted to the engine. These kits include a unique reusable belt tensioner tool which allows you to easily make adjustments, then remove and store the tool till needed. March uses precision CNC construction with 6061-T6 aluminum for a precise fit and solid strength, along with high-quality components and brackets; all mounting hardware is included. There are many advantages to serpentine belts, and with the incredible fit, finish, and construction of March Performance Sport Track Ultra all-inclusive Chevy serpentine pulley kits, you'll get performance and style all in one.

4.33 out of 5 stars ( 3 )

AFR 224cc Black Hawk Gen 3 Hemi Cylinder Heads

Looking to increase the performance of your Gen III-powered vehicle? AFR 224cc Black Hawk Gen 3 Hemi cylinder heads are to be offered in as-cast and fully CNC ported versions, either assembled or as no-parts (bare) heads to provide the power and performance Mopar enthusiasts crave. Manufactured using A356 aluminum and permanent-mold technology, AFR castings are second to none. Assembled pairs will come with high-quality components, such as PAC Racing springs, Titanium (CNC versions) or stainless steel retainers, AFR valves, and Viton® valve seals.

5.0 out of 5 stars ( 1 )

Billet Specialties Sport Trac Serpentine Systems

Billet Specialties Sport Trac serpentine systems bring value, style, and quality to your engine compartment. Sport Trac systems feature precision-machined brackets for flex-free operation, laser-straight belt alignment, and ease of installation. Each of the Billet Specialties brackets are finished in satin black powdercoat for a classic look, while the pulleys are hardcoat black anodized for durability, plus quality stainless hardware is used throughout for superior corrosion protection. Starting off with a strong foundation ensures quality; Billet Specialties Sport Trac serpentine systems are completed with the best components for reliability and long life. Sport Trac serpentine systems include: * 170 amp one-wire alternator * AC Compressor * Aluminum power steering pump and reservoir * Power steering hard line for pressure side * Tensioner * 6-rib serpentine belt * Precision-machined brackets and pulleys * Precision-machined AC compressor manifold

Not Yet Reviewed

D.S.S. FX-Series Forged 4032 Alloy Piston and Ring Kits

D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.

3.0 out of 5 stars ( 5 )

Summit Racing™ Pro LS Piston and Rod Kits

Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control

4.84 out of 5 stars ( 19 )

Manley Pro Series I-Beam Connecting Rods

Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.

Not Yet Reviewed

COMP Cams LST Stage 2 Blower Camshaft Packages

COMP Cams LST Stage 2 blower camshaft packages offer billet steel construction and Low Shock Technology making them the perfect upgrade for GM LS engines with larger displacement or larger blower applications that include more serious additional modifications for higher rpm and more power. Available in either a Cam Kit (CK) or Master Kit (MK) that includes lifters and timing set, both are Spintron and dyno-tested. Features: * LST Low Shock Technology cam lobe profiles for increased horsepower and improved stability at higher rpm * Spintron and dyno-tested to ensure maximum power, boost response, and reliability * Packages include: Hydraulic roller camshaft, pushrods, dual valve springs, tool steel retainers, valve locks, spring seats, and valve seals

Not Yet Reviewed

Mahle Forged Diesel Race Piston and Ring Kits

Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.

Not Yet Reviewed