1986 GMC K1500 - In Stock Filter Options - Vendor In Stock Filter Options Parts & Accessories

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,375.95

—

$2,534.95

Edelbrock E-Force Supercharger Kits

Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.

4.11 out of 5 stars ( 9 )

$3,730.95

On Sale

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,199.95

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,754.95

—

$2,888.95

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

PSC Hydraulic Assist Steering Systems

Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.

4.33 out of 5 stars ( 12 )

$2,565.00

On Sale

Tuff Country EZ-Ride Suspension Lift Kits

Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts

4.1 out of 5 stars ( 72 )

$2,496.96

$2,247.26

Dee Zee Combo Transfer Tanks

Dee Zee combo transfer tanks offer room for liquid, room for gear—and plenty of extra room in your truck bed! These units combine a handy utility chest, together with a liquid transfer tank, so they take up less of your much-needed truck bed space. The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Dee Zee utility chests have lockable stainless steel paddle handles. Combos are available in Brite-Tread aluminum, with or without an UltraBlack powdercoat finish; or in heavy-duty steel with a textured white or black powdercoat finish designed for corrosion protection. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting everything you need with Dee Zee combo transfer tanks.

Not Yet Reviewed

$2,132.99

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats are specifically designed for your vintage or classic GM truck or SUV. Add style and performance to your interior with these low-back sport benches. Constructed with a tubular steel frame and reclining mechanism, the high-density seat foam has molded sport side bolsters for support. These platforms are covered in premium black vinyl with black stitching for compatibility with any interior theme. Step up your dress up game with an assist from Brothers Trucks split-bench seats.

Not Yet Reviewed

$2,254.95

Pace Edwards BedLocker Electric Retractable Tonneau Covers

Pace Edwards BedLocker electric retractable tonneau covers feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker's patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability. Other features: * Hard tonneau cover retracts into canister at the front of the truck bed * Electromagnetic brake locks the cover in any position * Low-profile, aerodynamic design increases fuel economy by up to 11 percent * Fits over fifth-wheel trailer hitches * Tonneau comes with WeatherGate tailgate seal

4.8 out of 5 stars ( 5 )

$2,880.00

Pace Edwards Full Metal JackRabbit Retractable Tonneau Covers

Pace Edwards Full Metal JackRabbit retractable tonneau covers incorporate all of the features and benefits of the original JackRabbit—but with the added strength and good looks of all-metal, interlocked, powdercoated aluminum panels. Installation and operation is the same; and the weather-sealed, low-profile, Latch-n-Lok handle system allows the cover to be latched every 12 in. With the continuous tension spring, smooth operation is ensured every time you open or close the tonneau. Their flush-mounted, top-cover design also provides a sleek, low-profile look to enhance the appearance of your truck. Order the model designed to fit your vehicle application.

3.0 out of 5 stars ( 3 )

$2,057.00

—

$2,176.00

Bed Wood and Parts RetroLiner Wood Bed Liner Systems

Bed Wood RetroLiner systems offer enthusiasts who prefer an all-in-one kit a truly innovative product to deliver yesteryear's classic touch to your late model truck. RetroLiner wood bed liner systems provide American craftsmanship that will boost your truck's looks with beautiful wood only available through Bed Wood and Parts. The systems include your choice of nearly 40 exotic and popular wood species--all kiln-dried and stabilized, precut, properly milled, grooved, 4-stage finish sanded, and delivered ready to finish! Plus, you'll receive cut-to-length polished stainless steel or natural steel bed strips and mounting hardware, mounting pads, a frame, an installation tool, and comprehensive, easy-to-follow instructions. There's no drilling or cutting required and they install without damage to your factory steel bed! Whether you're restoring a pre-war classic, personalizing your truck from the musclecar era, or customizing a newer domestic or import model, you can trust your project to Bed Wood and Parts RetroLiners because, as they say, "Wood looks good!"

Not Yet Reviewed

$2,320.00

—

$4,995.00

Bed Wood and Parts Undrilled BedWood Kits

Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these undrilled BedWood kits are precision milled with your truck in mind. They come undrilled, allowing you to drill your own holes for custom application or hidden mounting holes. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.

Not Yet Reviewed

$2,045.00

—

$3,465.00

Bed Wood and Parts Deluxe X Kits

Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!

Not Yet Reviewed

$2,140.00

—

$4,695.00

Bed Wood and Parts Bed-In-A-Box Deluxe Kits

Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!

5.0 out of 5 stars ( 1 )

$2,015.00

—

$3,700.00

Bed Wood and Parts Standard X Kits

Bed Wood and Parts Standard X kits include your wood choice, mild (paintable) steel bed strips with zinc coated hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Standard X kit designed to fit your truck bed!

Not Yet Reviewed

$2,169.00

—

$4,445.00

Bed Wood and Parts Drilled BedWood Kits

Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these drilled BedWood kits are precision milled with your truck in mind. They come predrilled for bed-to-frame mounting. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.

Not Yet Reviewed

$2,045.00

—

$3,465.00

Bed Wood and Parts Bed-In-A-Box Standard Kits

Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!

Not Yet Reviewed

$2,374.00

—

$3,450.00

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$2,039.99

—

$2,451.99

RAM Pro Street Dual Disc Clutches

RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.

3.0 out of 5 stars ( 1 )

$2,159.00

1986 GMC K1500 Parts and Accessories