Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1965 Parts and Accessories
Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$14,973.00
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,328.99
—
$2,556.99
Champ Pans Fabricated Aluminum Valve Covers
Champ Pans fabricated aluminum valve covers bring a no-nonsense, old-school approach to small block engine modification. These valve covers feature a natural finish with no unnecessary decorations and are available for most domestic small block performance engines, left or right side. Order the model recommended for your engine application—then pop the hood and show that you mean business with Champ Pans fabricated aluminum valve covers!
( 3 )
$255.71
—
$279.27
OER Roof Rail Weatherstrips
Replace deteriorating or missing roof rail weatherstrips with new ones from OER. Their quality reproductions provide your project with an original fit for your entire roof rail. Many OER roof rail kits are licensed by GM and include the correct molded ends with a metal insert for an easier installation. Whether the kit you choose is backed by GM or not, you can rest assured that you will have authentic looks and an original fit for your restoration with these roof rail weatherstrips.
( 8 )
$76.99
Classic Performance Steering Box Mounting Brackets
Classic Performance has replacement steering box mounting brackets available for your application. These custom brackets come complete with hardware to mount your power steering box. Mount up and you're ready to roll.
( 1 )
$114.99
Baer Brakes SS4+ Disc Brake Systems
For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!
( 10 )
$1,949.95
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
—
$2,299.99
CP Pistons Bullet Series Piston and Ring Kits
CP Pistons Bullet Series piston and ring kits are value-packed replacements. Offered at an affordable price, these high-quality pistons incorporate everything that has made CP an industry leader—extensive research, computer-designed forgings, tight tolerances, and rigorous quality control. Having Bullet Series pistons means you no longer have to compromise high performance, even on a tight budget. They're manufactured from 2618 forged aluminum alloy for strength and durability. Additional features include: * Piston balance 1 gram * Dual forced pin oilers * Contact reduction grooves * Accumulator groove * Contemporary high performance ring sets * Forged side relief * Chromoly wrist pins with wire locks
( 5 )
$172.79
American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$4,895.95
Eagle H-Beam Connecting Rods
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 85 )
$131.99
—
$140.99
KB Performance Pistons
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$55.99
—
$128.20
Silv-O-Lite Cast Pistons
Silv-O-Lite quality cast pistons are manufactured from cast aluminum and then machined to produce a unique diamond finish, all to exacting skirt tolerances. These OE-type pistons are heat-treated and machined for strength and durability, tighter piston-to-cylinder wall clearances, and longer piston life.
( 53 )
$44.79
—
$127.67
ATI Super Damper Standard Harmonic Balancers
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 239 )
$399.95
ATI Crank Trigger Shells
ATI now offers a custom crank trigger shell option, eliminating an additional pulley being bolted to your damper. If you already own an ATI Super Damper, you can just change the outer shell to the trigger. ATI can place any number of magnets in the outer shell at whatever degree marks you wish. These aluminum crank trigger shells will work with "Flying Magnet" pickups and other trigger sources. Order the model best suited for your application. Note: When placing your order, please have the desired quantity and location of magnets ready. Additional charges for extra magnets apply.
Not Yet Reviewed
$277.99
—
$300.00
Harwood Lexan Windows
Harwood Lexan windows are designed to replace your factory glass windows. They are available in standard Lexan or Margard and come in different thicknesses for multiple street or race applications.
( 26 )
$222.99
—
$409.99
Diamond Pistons Domestic Series Pistons
Diamond Pistons Domestic Series pistons are designed and tested for the high-stresses seen with high-compression, forced induction, or nitrous-fed domestic engines. Engineered with longevity, reliability, and strength, these forged aluminum pistons are specifically designed for your engine to deliver the results you demand. Diamond Piston Domestic Series pistons feature: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
( 2 )
$123.00
DeWitts Direct-Fit Surge Tanks
DeWitts direct-fit surge tanks install in the stock mounting position and use the factory connections without any modifications or adapters. Manufactured from original tooling, they feature a Harrison logo, original pressed fittings, and filling instructions. DeWitts direct-fit surge tanks are available in date-coded or non-dated coded models. Order the tank recommended for your vehicle.
( 2 )
$349.99
On Sale
ICON Premium Forged Pistons
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$198.37
—
$227.79
$178.53
—
$205.01
Eddie Motorsports S-Drive Serpentine Pulley Drive Systems
Eddie Motorsports S-Drive serpentine pulley drive systems are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors and tensioners. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories. Note: Not for applications with VVT.
( 19 )
$3,108.95
Silv-O-Lite Hypereutectic Pistons
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 76 )
$51.06
—
$136.83
Instant Rebate
HushMat Firewall Kits
HushMat firewall kits are created to reduce thermal transfer into your interior that comes from the engine, headers, exhaust, and catalytic converter. HushMat's proprietary visco-elastic chemistry dissipates heat, insulating your interior, causing less load on your air conditioning system to make your vehicle significantly cooler and more comfortable. Additional features and benefits include: * HushMat butyl sheets are available in stealth black or silver * Self-adhesive peel-and-stick installation (no glue required, no alcohol or acetone wash needed; no installation tools required) * Universal application (can be applied to firewall, floor pan, tunnel, doors, roof, rear wheel wells, trunk, and quarter panels) * Reduces heat and thermal transfer by over 40 percent * Lightweight and super-flexible (less than 1/8 in. thick and 0.47 lbs. per sq. ft.) * Trims easily with standard razor knife or household scissors * Stay warmer in the winter and cooler in the summer (insulates from -30 degrees up to 550+ degrees F) * Reduces road noise and vibration (low-frequency noise from 0 to 1,000 Hz) * OEM approved * Installs in half the time vs. other brands
( 5 )
$110.21
McLeod RXT Street Twin Clutch Kits
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$1,050.00
Eddie Motorsports V-Drive V-Belt Pulley Drive Systems
Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 2 )
$2,008.95
Heidts 4-Link Rear Suspension Kits
Heidts 4-link kits transform your classic vehicle into a high performance fun street machine with a modern suspension. These complete kits stiffen the body, and the tunable rear 4-links provide the best traction and bring a ton more tuning potential to the table. Bolt-in and weld-in kits are both available. Heidts utilizes proven engineering and design for high performance street and track purposes.
( 2 )
$2,411.00
