Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1965 Parts and Accessories
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,328.99
—
$2,556.99
American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$4,895.95
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$2,299.99
Eddie Motorsports S-Drive Serpentine Pulley Drive Systems
Eddie Motorsports S-Drive serpentine pulley drive systems are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors and tensioners. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories. Note: Not for applications with VVT.
( 19 )
$3,108.95
Eddie Motorsports V-Drive V-Belt Pulley Drive Systems
Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 2 )
$2,008.95
Heidts 4-Link Rear Suspension Kits
Heidts 4-link kits transform your classic vehicle into a high performance fun street machine with a modern suspension. These complete kits stiffen the body, and the tunable rear 4-links provide the best traction and bring a ton more tuning potential to the table. Bolt-in and weld-in kits are both available. Heidts utilizes proven engineering and design for high performance street and track purposes.
( 2 )
$2,411.00
Heidts Nova Subframe/Crossmember Suspension Packages
You're low ridin' and lookin' good with Heidts Nova subframe/crossmember suspension packages. Your Chevy Nova will have a lower stance and the superior handling that street rods have enjoyed for some time. Heidts suspension packages make it easy to get that timeless look. Packages include: * Heidts front subframe * Tubular upper and lower arms * Stock spindles * 11 in. rotors with single-piston calipers * Manual rack and pinion steering * Stock shocks and springs
Not Yet Reviewed
$4,274.00
Heidts Mustang II Front Suspension Kits
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,700.00
AFR 357cc Magnum BBC Cylinder Heads
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$4,194.00
Dart Pro 1 Aluminum Cylinder Heads
Inspired by Dart's championship winning Pro Stock designs, Dart Pro 1 aluminum cylinder heads cover a wide range of applications from street cars and trucks to all-out racing. Heads designed for street performance and mild bracket racing offer excellent mid-range torque and power, and are excellent for heavier vehicles. Competition heads are ideal for maximum effort naturally aspirated, big boost forced induction, or nitrous applications. Dart Marine Pro 1 cylinder heads feature an exclusive chromate surface finish to inhibit corrosion and extend the life of the head. They are also fitted with Inconel exhaust valves to withstand the extended running time and temperatures typical of marine usage. Dart's as-cast ports flow more than many ported designs at a much more affordable price. But they also offer fully CNC-machined heads with every intake port, exhaust runner, valve bowl, and combustion chamber shaped by their 5-axis, computer controlled machining centers to produce compound curves and complex shapes that no human could duplicate with a hand grinder. Available bare or fully assembled, long-wearing bronze valve guides, screw-in studs, multi-angle intake seats with hardened, radiused exhaust seats are standard on most heads. Assemblies typically include stainless steel valves, premium springs, locks, retainers, guide plates, and seals. Many Pro 1 heads include race-proven features such as improved spark plug location, extra-long intake valves, raised exhaust ports, and fast burn chambers. They are offered an extensive variety of valve angles, intake port volumes and shapes, exhaust port locations, valve sizes, and chamber volumes.
( 10 )
$2,220.07
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,974.99
—
$2,994.99
Brodix Cylinder Heads Top-End Packages for Chevy
Bolt one of these complete Brodix top-end packages for Chevy onto your short block for the potent tune-up performance you expect--without the wasted time and hassle of assembling all of the various components on your own. The experts at Brodix Cylinder Heads have done the legwork for you, providing quality heads, plugs, gaskets, covers, and hardware in one convenient kit. Brodix top-end packages include: * Fully assembled Brodix cylinder heads * Spark plugs * Head gaskets, intake gaskets, exhaust gaskets, carburetor gaskets, and valve cover gaskets * Valve covers with studs and nuts * Head bolts and washers * Intake bolts and washers * Available with single or dual-plane intake manifolds * Free Brodix hat
( 3 )
$4,880.99
Crower Stainless Steel Shaft Mounted Rocker Arm Systems
For those of you that feel most confident running a steel-based valve train, look no further than the collection of Crower stainless steel shaft-mounted rocker arm systems. Every configuration has been rigorously scrutinized to offer extreme rigidity and accuracy while optimizing the moment of inertia phenomena condition. Crower engineers made ease of installation and maintenance a top priority--so you'll never waste a moment when time is critical at the track. These stainless steel shaft rocker systems are a perennial favorite of dirt late models and marine endurance competitors. Sustained high temperatures have little effect on the strength properties of stainless steel so components made from this material typically have a longer life expectancy than similar components made from aluminum. All Crower shaft mount rocker arms are available with Crower's needle bearing roller tip option. They greatly reduce friction for added horsepower and decreased valve guide and valve stem wear. The lighter tips deliver greater valve control for increased rpm and improve valve spring longevity by decreasing heat compared to traditional non-needle designs.
( 2 )
$2,375.99
—
$2,886.99
Classic Performance Pro-Touring Stage 1 Kits
Classic Performance Pro-Touring Stage 1 kits provide the ultimate in performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, gas-charged monotube front and rear shocks, and mounting hardware.
( 2 )
$2,103.99
—
$2,560.99
Callies Magnum Crankshafts
Race smart with Magnum durable competition crankshafts from Callies. Manufactured from ultra-pure AISI 4340 steel, these cranks are subjected to multiple heat treatments, giving them unsurpassed wear and strength characteristics. With their gundrilled mains and fully profiled counterweights, you may choose from an available selection for a variety of engine types. You just can't beat the proven reliability and value of Callies Magnum crankshafts.
( 2 )
$4,553.00
AJE Suspension Mustang Tubular K-Member Complete Swap Kits
Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.
( 12 )
$3,004.99
Hughes Performance Competition Transmissions
Hughes Performance competition transmissions deliver unsurpassed strength and reliability under the most severe conditions. The finest state-of-the-art performance parts are used in Hughes competition units. All internal and external components are inspected and then assembled to exact tolerances, thus ensuring top quality and performance. These transmissions are equipped with reverse-pattern, or, in some cases, forward-pattern valve bodies for sure, solid, quick shifts. They are also equipped with Hughes "Pro III" trans-brake valve bodies. These transmissions are designed with the capacity to withstand pass after pass.
Not Yet Reviewed
$2,578.99
—
$4,886.99
Hughes Performance Street and Strip Transmissions
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$2,546.99
Carrillo Pro-H Tapered H-Beam Connecting Rods
Choose the right connections--Carrillo Pro-H connecting rods. Able to handle extreme engine loads, their tapered H-beams allow for some weight savings on the reciprocation end and give increased clearance for fully boxed pistons. Obsessed with perfection, Carrillo produces their Pro-H connecting rods in small batches. They mesh quality materials, precision forging, excellent craftsmanship, and high-tech designs to deliver a flawless performance for your race engine. Applications are available for many venues of motorsports. Add the high performance "choice connection" to your race machine--Carrillo Pro-H tapered H-beam connecting rods.
Not Yet Reviewed
$2,919.04
Classic Performance Pro-Touring Stage 2 Kits
Classic Performance Pro-Touring Stage 2 kits provide the ultimate performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, adjustable coilover shocks, and mounting hardware.
( 3 )
$2,378.99
—
$2,652.99
ATI TH400 Transmissions
ATI Performance Products TH400 transmissions offer great performance for 400 c.i.d. or larger big blocks. Modifications and options include: * Fully blueprinted and equipped with high-flow lube circuits, increased torque capacity, and hard chrome oil rings * Sprags replaced with heavy-duty units * Clutch packs are assembled for individual applications * Compu-Flow valve body standard * Special low-gear sets for increased launch capability * Lightweight options available to upgrade the transmission
( 1 )
$2,616.99
—
$2,956.99
Vintage Air Gen-IV SureFit Systems Complete Kits
Ditch the cables for the totally cool Vintage Air Gen-IV SureFit Systems complete kits. These fly-by-wire systems are fully electronic servo motor controls--there are no cables or capillary tubes to route. Gen-IV systems are model-specific and offer climate-control technology for real-deal, bi-level airflow and "just right" temperature air blending. Vintage Air SureFit Gen-IV all-in-one systems are delivered with an evaporator kit, a condenser and drier package, brackets, mounting hardware, and instructions for a professional finish that maintains your car's value and cool looks. Chill your classic car the electronic way with Vintage Air Gen-IV SureFit Systems complete kits.
Not Yet Reviewed
$2,329.99
Moser Engineering 12-Bolt GM Housing and Axle Packages
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages
Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.
Not Yet Reviewed
$2,547.00
