Availability
Eddie Marine exhaust block-off plates are made from stainless steel and black Fusioncoated for looks and protection. They're used to block off the exhaust outlet on Mercruiser Bravo Gimal housings, when removing the stock exhaust "Y" pipe for through-transom exhaust applications.
( 1 )
$61.95
Upgrade your exhaust tips with the absolute best flapper design available—Eddie Marine's non-burn exhaust flappers! They're constructed to be installed inside of SS exhaust tips by welding the included mounting pin. These non-burn exhaust flappers represent the ultimate in durability, as well as a finishing touch to your boat's exhaust system. Order the model designed for your pipe diameter.
( 1 )
$68.95
Eddie Marine forward-reverse relay boxes are replacements for their trim tabs and can also be used with hatch actuators. By incorporating one of these boxes, the possibility of voltage drop will be eliminated and the actuator will be supplied with a full 12 volts of current at all times, regardless of the length and age of the power supply wires. The boxes contain two relays encapsulated in epoxy for corrosion resistance—and they also allow the use of a single-pole switch to operate reverse polarity actuators, as well as accommodate two actuators simultaneously. Ensure that your actuator will operate at its maximum speed with an Eddie Marine forward-reverse relay box.
( 1 )
$92.00
Eddie Marine exhaust bends are offered to fabricate custom exhausts, create alternate exhaust routes, and to lower the outlet position of your exhaust. Their 90 degree bends are raw stainless steel available in a choice of O.D.s with legs approximately 10 1/2 in. and 13 1/2 in. long. Their 80 degree and "S" bends (available in three drop lengths) are Fusioncoated stainless steel and accept 4 in. exhaust hose.
( 2 )
$100.95
Eddie Marine remote power outlets offer a solution to opening your hatch when you have a dead battery. Available in white plastic and black plastic, the covers of these outlets open to reveal the two battery posts for easy actuator jump starting. They can be mounted inside a seat base or other inconspicuous location.
( 4 )
$64.00
Eddie Marine offers swim step brackets to mount your Eddie Marine swim steps. They're 1 1/2 in. wide, 6 in. long against the transom, and extend out 12 in. These stainless steel brackets are available in 12 degree or 16 degree angles, as well as in a bright polished finish or in several powdercoat colors. (Important note: it's imperative to select the correct bracket angle to fit your boat's transom to ensure the step is level to your boat. These are the Eddie Marine swim step mounting brackets only.)
( 4 )
$53.95
Eddie Marine super-duty offshore hatch hinges deliver quality and strength. They're cast from stainless steel and then given a bright polished finish to enhance your boat's hatch appearance and performance.
Not Yet Reviewed
$108.95
Eddie Marine vents will add a touch of style to your boat, while providing proper ventilation. They're machined from 6061 T-6 billet aluminum and are available in a variety of sizes, shapes, and finishes.
Not Yet Reviewed
$76.95
—
$94.95
Eddie Marine billet aluminum deck cleats offer your boat a traditional look machined from 6061-T6 aluminum. They're available in two sizes with a polished finish or in a variety of Fusioncoat colors.
Not Yet Reviewed
$61.95
Eddie Marine billet aluminum slimline cleat bezels add a complementary look to your boat. These bezels install against the deck underneath the cleats. They're available in many polished and anodized finishes, as well as a variety of Fusioncoat colors. Order the size and finish you prefer.
Not Yet Reviewed
$55.95
Eddie Marine is the largest supplier of custom switch panels in the performance marine industry. These billet aluminum switch panels are machined from 6061-T6 aluminum on precision CNC mills and are offered polished or Fusioncoated. To further enhance the look of the panels, they're laser engraved for the cleanest graphics possible. The switch panels are available in a large variety of configurations to fit your electrical needs.
( 1 )
$52.95
—
$60.00
Eddie Marine control cable accessories include clamps, shims, pivots, connection kits and more. Everything you need to position, hold, and secure your boat throttle and shifter cables is available at Eddie Marine.
( 2 )
$77.95
Eddie Marine billet aluminum flush-mount side light bezels complete the look of your boat lights. These bezels are available in a highly polished finish, as well as a variety of Fusioncoat colors to enhance and complement the other components of your boat.
Not Yet Reviewed
$79.95
Eddie Marine steering wheel hub adapter assemblies are made from 6061 T-6 aluminum. They are designed to adapt the steering wheel to the steering shaft and are available in different sizes and styles, with or without cap. Choose from nearly a dozen colorful finishes.
Not Yet Reviewed
$83.95
—
$108.95
Eddie Marine long reach hatch hinges are very popular. They are cast from stainless steel and available in a bright polished finish or in any of their Fusioncoat colors. Clean design, the strength of stainless, and long-lasting good looks; no wonder Eddie Marine long reach hatch hinges are so well-liked.
( 1 )
$86.95
Eddie Marine billet aluminum pop-up bow light bezels dress up your watercraft lights. These bezels are available in highly polished finishes, and a variety of Fusioncoat and anodized colors to enhance, match, and complement the other components of your boat.
Not Yet Reviewed
$61.95
Eddie Marine corrugated exhaust hoses are heavy-wall marine hose featuring corrugated construction and a double wire helix imbedded between the multiple layers. These exhaust hoses are for use on longer runs which require the tightest bends. Eddie Marine corrugated exhaust hoses are offered in several lengths and diameters.
Not Yet Reviewed
$61.95
—
$107.95
Eddie Marine Quick-Pin cleat replacement bases are made from high-quality stainless steel, just like your originals. When you need additional bases to make docking easy, Eddie Marine Quick-Pin cleat bases are ready for you to install.
Not Yet Reviewed
$56.95
Eddie Marine Quick-Pin replacement pin and loop cleats are made from high-quality stainless steel, just like your originals. Whether you want to replace or have additional pin assemblies on hand, Eddie Marine has the Quick-Pin components to ensure easy docking.
Not Yet Reviewed
$94.95
Eddie Marine soft wall exhaust hoses are made from heavy-duty rubber. They're very pliable for easy installation, but contain no wire, so they cannot make sharp bends. The hoses are available in several lengths and diameters to meet your exhaust or plumbing needs.
( 3 )
$55.95
—
$102.95
Eddie Marine billet aluminum step pads allow for safer boarding, while adding stylish accents to your boat. Equipped with raised rubber "non-skid" inserts, the pads also protect your hull from scuffs and scratches. Plus, they're far more attractive than commonly used plastic steps. These step pads are available in four different sizes with either a highly polished or anodized finish, as well as with a variety of Fusioncoat colors featuring durable anti-corrosion base coats.
( 1 )
$76.95
—
$97.95
Eddie Marine Rally gas fill bezels are designed to dress up your fuel fill. They're also ideal for adding extra width when you need to cover existing mounting holes from an old style gas fill. The bezels are machined from billet aluminum and sandwich between the fill and the mounting surface. Polished stainless socket cap screws (included) are threaded into the bezel, which is 4 5/8 in. diameter and 1/4 in. thick. Gas fill bezels are offered in a polished, anodized, or colorful powdercoat finish. (This is the Rally-style bezel only; gas fills are sold separately.)
Not Yet Reviewed
$56.95
Eddie Marine billet aluminum pop-up cleat bezels add a complementary look to your boat. These bezels install against the deck underneath the cleats. They're available in many polished and anodized finishes, as well as a variety of Fusioncoat colors.
Not Yet Reviewed
$53.95
Eddie Marine slimline pull-up cleats are attractive and functional. Manufactured from stainless steel, they're ideal for narrow deck configurations and attach from the underside with no exposed fasteners. Simply pull up on the cleats; an internal detent keeps them in place. Mounting back-up plates are included and they are available in three lengths.
Not Yet Reviewed
$70.95
—
$77.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
