Ignitions & Electrical | Summit Racing

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.16 out of 5 stars ( 94 )

$2,149.95

—

$3,549.95

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$2,499.95

—

$3,699.95

Mopar Replacement Engine Control Modules

Mopar Replacement offers engine control modules for a wide range of applications, including many Jeep, Dodge, Chrysler, and Ram vehicles from the 1950s and up. These new or remanufactured replacements are among the best and longest-lasting electrical system parts available. They will deliver the fit and performance you expect. Select the ECM recommended for your Mopar ride.

Not Yet Reviewed

$2,014.99

Haltech uC-10 Digital Display Dashes

Haltech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a Haltech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a Haltech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors

5.0 out of 5 stars ( 1 )

$2,160.99

Chevrolet Performance 430 HP LS3 Engine Controller Kits

These Chevrolet Performance 430 HP LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or musclecar.

Not Yet Reviewed

$2,320.95

Haltech Nexus R3 VCU with Universal Wire-In Harness Kits

Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.

5.0 out of 5 stars ( 1 )

$3,015.99

Racepak IQ3D Drag Dash Bracket Bundles

Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader

5.0 out of 5 stars ( 2 )

$2,549.95

MSD Pro 600 CDI Ignition and High-Output Coil Kits

When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,699.95

Ford Performance Parts 2018-20 Gen 3 Coyote Control Packs

Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors

Not Yet Reviewed

$2,284.99

Ford Performance Parts 2021-23 Coyote 5.0L Control Packs

Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system

5.0 out of 5 stars ( 1 )

$2,322.99

—

$2,462.99

FuelTech FTSPARK-8 GEN 3 Ignition Systems

FuelTech FTSPARK 8 GEN 3 MAX2000 ignition systems are high performance, eight channel ignition modules engineered to deliver precise, reliable spark control for demanding racing and high power engine applications. Designed to integrate seamlessly with FuelTech FT Series ECUs, it provides powerful ignition energy and accurate timing control across a wide range of engine configurations. The Gen3 design improves response, durability, and thermal management, making it well suited for high RPM operation, boosted engines, and extreme race environments. With support for individual smart coils and sequential ignition strategies, the FTSPARK 8 GEN3 MAX2000 gives tuners and racers the control needed to maximize power, consistency, and drivability, whether the vehicle is used on the track, strip, or street.

Not Yet Reviewed

$2,599.00

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,099.95

—

$3,799.95

Chevrolet Performance 480 HP LS3 Engine Controller Kits

Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.

5.0 out of 5 stars ( 1 )

$2,257.74

Chevrolet Performance LS Controller Kits

Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet

5.0 out of 5 stars ( 1 )

$2,202.68

MSD 8-Plus CD Ignitions

These MSD 8-Plus CD ignitions produce the same extreme output as the original 8-series, yet they are now in a smaller housing with improved efficiency and internal components. The new 8-Plus ignitions feature built-in, 2-step rev control. Now you can switch between two rev limits without extra wiring or housings. For those who are looking for a dual-fire MSD 8, the MSD 8-Plus CD ignitions are all that you need. MSD's engineers were able to deliver ignitions that are capable of firing two coils at once for those extreme racers using dual plug race setups.

5.0 out of 5 stars ( 3 )

$2,249.95

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.49 out of 5 stars ( 99 )

$2,049.95

—

$3,149.95

FuelTech FTSPARK GEN II Ignition System

The FuelTech FTSPARK GEN II is an extremely high-energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing. It's developed for high-horsepower combinations and test-proven on 5,000+ horsepower engines! Compatible with any ECU on the market, this system is able to generate a spark with up to 750mJ (mJ=mili Joules) of energy—and is capable of firing the spark with 140 amps of current in the coil primary. With these features, FTSPARK generates a spark with approximately 5x more energy and 10x more current compared to a SparkPRO, ensuring a burn in any condition, especially in extremely rich air/fuel ratios. Models are available for 4-, 6-, or 8-coil applications. Technical description: * Programmable energy via CAN or digital input to adjust the energy level; - 475 V in the primary of the coil, which helps to prevent interference in the system * 140 amps of current in the primary of the coil with Racing CDI FuelTech coil for FTSPARK 750mJ * CAN communication with FuelTech PowerFT ECUs for diagnostic and datalogging * Automotive connector with gold-plated terminals * Serial bus (1 wire) allows the use of only one ECU output that triggers all ignition outputs (only with PowerFT) * Anodized aluminum and plastic case * Maximum working temperature: approximately 212 degrees F * Supply voltage for full power: 14-26 V. Minimum voltage for starting 8 V * Maximum operating frequency: 670 Hz * Compatible with other ECUs on the market. Check compatibility of your ECU with FuelTech tech support Contents of package: * One FTSPARK (GEN II750mJ or EXTREME) module * Installation and operation manual * Mounting hardware kit (4 rubber mounts, 8 washers and 8 nuts)

Not Yet Reviewed

$2,299.00

AiM Sports MXG 1.3 Data Loggers

The AiM Sports MXG 1.3 dash data loggers offer a comprehensive and flexible solution for data acquisition and display, enabling drivers and teams to monitor, analyze, and improve their performance on the track. With a high contrast TFT display, which is fully configurable, you can create and customize pages/displays to suit your requirements using different fonts and dimensions for all the information received by the dash logger. Swapping through the pages is managed by pushing one or two push-buttons. An ambient light sensor keeps the backlight at optimum brightness levels. Give yourself an edge above the competition with AiM Sports MXG 1.3 data loggers. They'll provide you with the knowledge you need to improve your performance and cross the finish line victorious. Product overview and key highlights: * The MXG display features a high-contrast TFT display, fully configurable by a dedicated software * Designed to acquire and display data coming from your ECU, the internal accelerometer and GYRO, the GPS module (included in the kit) analogue inputs/digital inputs and predefined math channels * The MXG has eight configurable RGB LEDs—you can choose the conditions and colors * An ambient light sensor keeps the backlight at optimum brightness levels * With integrated shift lights you can choose from a host of advanced multi-colored RGB shift light patterns that can be customized to suit your requirements, and for each unique gear when required * The performance and data acquired can also be incremented by adding up to eight expansion modules * You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units * Swapping between pages can be managed pushing one or two pushbuttons * Select a solid alarm or flashing one and the flashing frequency, you can choose to have an accompanying text message and set the alarm priorities * Analogue camera inputs are available, to switch your display into a mirror camera, through a push-button command or event management (camera sold separately)

Not Yet Reviewed

$3,249.00

—

$3,249.99

Racepak SmartWire Kits

Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.

1.0 out of 5 stars ( 1 )

$2,399.95

—

$2,699.95

Holley Terminator LS Plug-and-Play Multi-Port Systems

Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting

4.0 out of 5 stars ( 1 )

$2,949.95

—

$4,649.95

Ford Performance Parts 2018-23 Coyote 5.0L Control Packs

Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.

Not Yet Reviewed

$2,346.99

Holley Terminator X Max GM Gen V LT Direct Injection Kits

Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.

Not Yet Reviewed

$3,299.95

—

$3,849.95

MSD Pro 600 CDI Ignition Boxes

MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,149.95

FuelTech FTSPARK-6 GEN 3 Ignition Systems

Unleash precise, high-energy ignition control with the FuelTech FTSPARK-6 Gen 3 ignition systems, engineered for extreme performance and rock-solid reliability in high-horsepower applications. Designed to deliver a massive 2000mJ of spark energy, this advanced CDI box ensures consistent combustion under the most demanding conditions—whether you're pushing the limits on the street, strip, or dyno. Featuring cutting-edge multi-spark capability, robust protection systems, and seamless integration with FuelTech ECUs, the FTSPARK Gen 3 Max 2000 gives tuners unmatched control, cleaner burns, and improved engine efficiency at any rpm. Built for racers who demand nothing less than total ignition dominance, the FuelTech FTSPARK-6 Gen 3 ignition systems are the ultimate upgrade for serious performance builds. Features and specs: * Designed for extreme motorsport environments including drag racing, rally, and off-road * Optimized for 6-cylinder engine applications * Die-cast aluminum enclosure with IP67 rating for water and dust protection * Reinforced internal construction for vibration and impact resistance * High-quality automotive-grade connectors for secure electrical connections * Advanced thermal design for improved heat dissipation and durability * Up to 2000mJ ignition energy per channel for extreme spark intensity * 475-500 V primary coil voltage for improved ignition under high cylinder pressure * Up to 175A primary coil current when paired with FuelTech Racing CDI coils * Extended spark duration for improved combustion stability * Programmable multi-spark mode for difficult-to-ignite fuel mixtures * Supports rich, high boost, alcohol, and nitromethane applications * Programmable ignition energy control via CAN or dedicated input * Advanced CAN bus integration with FuelTech ECUs * Per-channel diagnostics and real-time monitoring capability * Single-wire multiplexed trigger input for simplified wiring * Compatible with a wide range of motorsport ECUs * Supports 4, 6, or 8 independent ignition channels * Direct drop-in upgrade for FTSPARK GEN2 systems with identical pinout and mounting points

Not Yet Reviewed

$2,399.00