Availability
Showing In Stock Items. Show All 243 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$549.95
$359.95
—
$493.95
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$267.99
—
$521.99
On Sale
RT Off-Road slip yoke eliminator kits will keep your vehicles moving in the right direction. These kits include the necessary parts to convert the 231 transfer case to a rear fixed-style yoke, which not only provides great strength, but extends driveshaft length approximately 4 in., while reducing the angle. RT Off-Road provides a CV-style yoke, knowing that this style of driveshaft eliminates driveline vibrations and extends life. A properly lifted Jeep with the right aftermarket parts can explore all types of terrain. Keep from screaming for your life with RT Off-Road slip yoke eliminators.
( 4 )
$551.99
$496.79
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$412.95
—
$449.95
$370.95
—
$403.95
On Sale
OE axles usually do a good job of getting stock vehicles down the road, but larger tires, a heavy foot, and some wicked terrain are a recipe for disaster. RT Off-Road Performance Axle kits improve torsional and tensile strength 30 percent by using heat-treated 4340 alloy steel. All RT Off-Road Performance Axle kits are sold in pairs and feature rolled splines for greater overall strength; they come with hardware, bearings, and seals. Kits that replace original equipment tapered axles with flanged one-piece axles are also available.
( 6 )
$352.99
—
$559.99
$317.69
—
$503.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$174.99
—
$536.99
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$498.00
—
$551.00
$430.50
—
$476.00
TransGo automatic transmission reprogramming kits are designed with performance in mind. Most, but not all models contain additional features like Gear Command that allows you to hold manual low to any speed, and shift back to low at any speed. They are great for strip cars or 4x4 rock crawlers needing to select low and not have it upshift. Most TransGo automatic transmission reprogramming kits can be tuned for HD (Heavy Duty) use by following the recommendations in the kits.
( 39 )
$295.71
On Sale
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
$287.96
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$356.95
—
$598.95
$321.26
—
$539.06
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
$315.95
—
$515.95
Designed to handle the off-road capability of your Jeep, Moser Engineering Jeep axle kits feature a one-piece, forged design for maximum durability. They include installed wheel studs, Timken axle bearings, seals, and installation instructions. The kits are induction hardened and manufactured from premium quality steel to eliminate any chance of failure. Perfect for your daily driver, or rock crawling machine, these Moser Jeep axle kits provide the performance and reliability your vehicle requires.
( 26 )
$450.00
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 37 )
$391.99
—
$532.99
On Sale
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$428.99
$271.99
—
$522.99
On Sale
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$287.99
—
$641.99
$258.39
—
$545.69
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$461.95
—
$556.95
$415.76
—
$501.26
On Sale
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$293.95
—
$335.95
$264.56
—
$302.36
On Sale
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$324.99
$292.49
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 73 )
$299.00
On Sale
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$283.95
—
$367.95
$255.56
—
$331.16
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$255.99
—
$464.99
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$479.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
