Availability
Showing In Stock Items. Show All 95 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$549.95
$359.95
—
$493.95
On Sale
RT Off-Road slip yoke eliminator kits will keep your vehicles moving in the right direction. These kits include the necessary parts to convert the 231 transfer case to a rear fixed-style yoke, which not only provides great strength, but extends driveshaft length approximately 4 in., while reducing the angle. RT Off-Road provides a CV-style yoke, knowing that this style of driveshaft eliminates driveline vibrations and extends life. A properly lifted Jeep with the right aftermarket parts can explore all types of terrain. Keep from screaming for your life with RT Off-Road slip yoke eliminators.
( 4 )
$551.99
$496.79
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$412.95
—
$449.95
$370.95
—
$403.95
On Sale
OE axles usually do a good job of getting stock vehicles down the road, but larger tires, a heavy foot, and some wicked terrain are a recipe for disaster. RT Off-Road Performance Axle kits improve torsional and tensile strength 30 percent by using heat-treated 4340 alloy steel. All RT Off-Road Performance Axle kits are sold in pairs and feature rolled splines for greater overall strength; they come with hardware, bearings, and seals. Kits that replace original equipment tapered axles with flanged one-piece axles are also available.
( 6 )
$352.99
—
$559.99
$317.69
—
$503.99
On Sale
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$498.00
—
$551.00
$430.50
—
$476.00
On Sale
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
$287.96
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$356.95
—
$598.95
$321.26
—
$539.06
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
$315.95
—
$515.95
On Sale
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$287.99
—
$641.99
$258.39
—
$545.69
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$461.95
—
$556.95
$415.76
—
$501.26
On Sale
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$293.95
—
$335.95
$264.56
—
$302.36
On Sale
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$324.99
$292.49
On Sale
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$283.95
—
$367.95
$255.56
—
$331.16
On Sale
Centerforce clutch hydraulic master and slave cylinders are of the highest quality available. In most applications the new hydraulics are a direct Original Equipment (OE) replacement, which features a wider range of travel, steel braded lines with a protective heat shield and a Jiffy-Tite dry disconnect for easy installation. Whether you're doing some tough city driving, or racing at a track event, ensure your clutch can handle the demands of your high powered vehicle by installing Centerforce clutch hydraulic master and slave cylinders for improved clutch performance.
( 1 )
$283.95
—
$440.95
$255.56
—
$396.86
On Sale
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$286.99
—
$625.99
$254.14
—
$532.09
On Sale
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$524.99
—
$598.89
$472.49
—
$509.06
On Sale
Magnum Grip Pro Stick shifters from B&M include all of the standard Pro Stick features, plus the new Magnum grip handle, CNC-machined from billet aluminum. Compact, strong, and functional--what more could you ask for in a shifter for a drag race car--they're the ultimate shifter for Powerglide applications.
( 20 )
$389.95
—
$472.95
$253.95
—
$307.95
On Sale
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 61 )
$419.95
—
$608.95
$377.96
—
$548.06
On Sale
McLeod 1200 Series hydraulic throwout bearings restore firm, positive shifts. These direct-fit OE-replacement clutch slave cylinders feature a factory style wire-clip connector, and are made to the original factory specifications—with premium quality rubber components for compatibility with all DOT 3 and 4 brake fluids. Improve the shifting in your manual ride with McLeod 1200 Series hydraulic throwout bearings. Order the model designed for your vehicle application.
( 14 )
$279.00
$251.10
On Sale
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 50 )
$301.99
—
$483.99
$256.69
—
$411.39
On Sale
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 137 )
$438.00
$394.20
On Sale
Are you getting ready for a manual transmission rebuild? Start with one of these comprehensive service kits from Crown Automotive. They supply the bearings, seals, gaskets, rings, and small parts (contents will depend on the application chosen) needed to successfully overhaul your transmission. Preventative maintenance is worth the time spent—and helps to provide reliable long-term performance. Choose the quality of Crown Automotive manual transmission master overhaul kits to get the most from your work.
( 25 )
$406.99
—
$487.99
$366.29
—
$439.19
On Sale
Crown Automotive carries a full line of automotive on and off-road ring and pinion gears which are designed to meet original equipment specifications. Whether you're gearing your car for street, strip, or trail, choosing the proper gears will provide more torque to the wheels. Order the size and ratio for precise fitment with your particular axle setup.
( 2 )
$282.99
—
$508.99
$254.69
—
$458.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
