Availability
Bob Drake offers fuel tanks for a wide range of Ford vehicles. These steel replacements are available in a variety of sizes and configurations for fitment on specific cars and trucks. Order the model recommended for your application.
( 2 )
$359.99
—
$396.99
Prepare your classic Ford for illumination. Bob Drake headlight bucket assemblies include stamped steel, black painted bucket housings, sealed beam holders, retainers, adjusting spring, all mounting hardware, fender gaskets, and wire conduit.
Not Yet Reviewed
$319.99
Bob Drake tack strips are semi-hard rubber seals that fit into the B-pillar support and provide the needed anchoring point for firmly installing upholstery nails and screws. They effectively replace the original dense paper-style and won't attract moisture, eliminating rust and corrosion problems. These multi-purpose strips can also be used around door frames, headliner edges, and various other areas for filling wind-gaps and insulating. The 15 ft. rolls are available in a variety of sizes.
( 13 )
$27.99
—
$30.99
Bob Drake gauge sending units are excellent replacements designed to match the fit and function of the originals. They are reproduced from quality materials to provide a long service life. Keep an accurate check on vitals with Bob Drake sending units.
( 3 )
$47.99
—
$49.99
Bob Drake door hinge mirrors are true classics. Offered in several styles to fit your Ford's specific model year, they feature chromed arms and stainless steel heads. Bob Drake includes hardware for a correct original installation on either the left- or right-hand side of your Ford.
( 3 )
$47.99
—
$69.99
Bob Drake reproduction trunk handle and base kits are works of art—no detail is overlooked. Every component perfectly matches the factory original. They are ready to install with stainless key cover and keys; handle, base, glass lens, lens gaskets, 12 V bulb, wiring, special socket, extension nuts, inner base, shaft seal, rubber pad, key cylinder with 2 keys. All mounting hardware is included with these complete kits. The replacement units are designed for a variety of Ford vehicles from the 1940s.
( 1 )
$357.99
Bob Drake offers motor and transmission mounts for Ford car and trucks from the 1930s, '40s, and '50s. Designed "Ford Tuff", these mounts are also flexible enough to ensure vibration-free comfort. The upper cushion features soft rubber between the ring and shoulder washer to act as a shock absorber, as original Ford specifications called for, while the lower cushion has a metal shoulder washer for better alignment in cup. In addition to that, Bob Drake's mounts are the only ones to proudly wear the "Ford" script.
( 1 )
$29.99
Bob Drake pick-up outside rearview mirrors deliver detail and quality for your classic Ford. These Officially Licensed Ford Products feature diecast and chrome plated arms, stainless steel heads rolled over tinted glass, and are FoMoCo stamped. Bob Drake exclusively offers the 6-hole mounting bar to fit all 1953-66 trucks and includes mounting hardware and rubber door grommet.
( 1 )
$104.99
Bob Drake offers wheel trim rings for a variety of Ford cars and trucks from the 1940s and '50s. These polished stainless steel beauty rings feature easy snap-on installation and are available in a variety of sizes and styles, such as smooth, ribbed, and convex.
Not Yet Reviewed
$39.99
—
$61.99
Bob Drake offers headlight rims for a wide range of Ford cars and trucks from the 1930s, '40s, and '50s. These reproductions are made with original details from quality materials, then polish finished, chrome plated, or left unfinished and ready to paint. Order the part needed for your Ford's headlights.
( 1 )
$83.99
—
$181.99
Finish off your door with Bob Drake's door scuff plates. These beautiful reproductions are precise copies of the original with the same curves and details to enhance your classic Ford 3-window or 5-window coupe in both appeal and durability. Order the model recommended for your application.
Not Yet Reviewed
$280.99
Bob Drake offers replacement radiator support rods for a variety of 1930s and '40s Ford cars and trucks. These reproduction rods are machined from stainless steel with a polished finish. They include stainless steel thread covers.
( 1 )
$62.99
Bob Drake offers a variety of door hinge repair components for Ford cars and trucks from the 1930s, '40s, and '50s. From door check arms, bumpers, and washers …to hinge and cotter pins, these reproductions are machined from quality materials for an original fit and performance. Order the part needed for your vehicle application.
( 3 )
$5.99
—
$18.99
Bob Drake offers correct reproduction tailgate hinges for all 1938-56 Ford pickups and all 1957-72 Stepside models. The hinges are machined from steel with a protective black finish.
( 1 )
$11.99
Bob Drake offers replacement fan hubs for a variety of Ford cars and trucks from the 1940s and '50s. Old, original hubs require regular service and oil to maintain lubrication and smooth operation. Neglecting your original hub is asking for trouble and could be seriously hard your fan and radiator. The Drake team took the old originals down to the bits for a thorough examination—then designed a worry-free, no-service-needed unit with modern sealed bearings and a top-grade aluminum body with a high-strength steel shaft for years of dependable service. There's no better unit to keep your fan spinning and flathead running. Fan-mounting hardware is included. Additional details: * Two sealed, deep-groove ball bearings eliminate the need to oil and keep the unit spinning for years of use and miles of road * Body made of tempered aluminum, effectively doubling the tensile and yield strength to combat the stress of harsh RPM load conditions * Hard-anodized sheave offers greater wear resistance against high friction in belt contact surfaces * Shaft made of superior steel with added alloying elements for torsional strength and increased resistance to fatigue * Beautiful turned-aluminum surface finish provides a high performance appearance for any flathead, or simply color with high-heat paint to complement your engine's unique styling
( 2 )
$209.99
Bob Drake Reproductions offers a variety of exhaust hanger components for vintage vehicles, like 1930s era Ford models. These muffler clamp bushing sets eliminate pipe rattles the right way, replacing the bailing wire. Kits include eight rubber grommets, four with internal metal sleeves. (Bracket and hardware not included.)
Not Yet Reviewed
$22.99
Bob Drake wiper motor kits are designed to easily replace the original, sluggish vacuum-drive units. Each kit features a super dependable, 2-speed electric wiper motor with switch, Drake's custom engineered mounting brackets, and hardware. These easy-to-install kits use the original motor location and attach to your original wiper linkage. Bob Drake wiper motor kits include detailed installation instructions.
( 2 )
$250.99
Bob Drake offers exterior door handles for a variety of 1930s and '40s Ford vehicles. These replacements are beautifully chrome plated diecast metal with superb detail. They're available in multiple designs, and all handles come with shafts. Order the model recommended for your application.
( 3 )
$44.99
—
$140.99
Bob Drake offers hub caps for a wide range of Ford cars and trucks. Attentively developed from factory samples, Drake emulated Ford's original stamping methods to deliver caps with the crispest lines and a superior fit. Whereas other reproduction hub caps detract from your vehicle's appearance with wavy edges and washed-out insignias, Drake's precision-stamped high script detail and beautifully rolled edges are sure to please. They're crafted from polished stainless steel with baked-on, correctly toned Ford blue paint and logos. The hub caps are available in a variety of sizes and emblem options—ready to fit any Ford original wheels. (If mounting to reproduction wheels, check with manufacturer to ensure wheel accepts hub caps with original dimensions.)
( 1 )
$21.50
—
$51.99
Bob Drake offers inside rearview mirrors for a variety of 1930s and '40s Ford car and truck applications. Drake reproduction mirrors have earned a reputation for superb detail and long-lasting quality. Each polished stainless steel mirror features all the correct original details not found on those from other suppliers.
( 2 )
$64.99
—
$71.99
Bob Drake offers Baby Moon hub caps for a variety of Ford cars and trucks from the 1940s and '50s. Whether you call them baldies, smoothies, or moons, it's all the same great nostalgia look! These polished stainless steel wheels can be painted or chrome plated, if you wan to customize. Create your own look and cruise the boulevard! Non-Ford cars can adopt the Baby Moon accents, too, as these hub caps fit a wide variety of Detroit iron.
( 1 )
$42.99
Bob Drake offers air deflectors for a variety of Ford cars and trucks from the 1930s and '40s. Constructed of stainless steel and highly polished to a brilliant shine, the deflectors easily install in just minutes. They're great for flathead or overhead applications. Stainless mounting hardware is included.
( 1 )
$148.99
Bob Drake's locking gas caps are faithful reproductions of early Ford parts to help restore your classis ride to its original glory. Available in different styles, each fuel cap is made from the finest materials and workmanship to keep your classic Ford true to original form. The locking gas caps feature a locking mechanism and include keys to keep access to your gas tank on lockdown until you need to fill 'er up with gas. Order the fuel cap you need.
( 4 )
$49.99
—
$51.99
Bob Drake horn grille turn signals add safety to your Ford's existing horn grilles. Kits include two 12 V amber light modules that fit in a rubber boot and easily installed behind the horn grille. Add safety without compromise using Bob Drake turn signals.
Not Yet Reviewed
$90.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
