Availability
Anyone who has spent grueling hours extricating pins from rusty door hinges will surely appreciate the convenience and ease of Bob Drake hinge pin pullers. These handy tools are forged from steel and equipped with a heat-treated bolt that is guaranteed not to bend--no paint or rust beholden pin stands a chance of remaining stuck in place. Looking for the right tool to remove your pins without undue damage to your hinges, paint, or ego? The solution is Bob Drake hinge pin pullers. Hardened steel extensions are included with tool.
( 14 )
$48.99
Bob Drake universal glass setting tape is a must for properly sealing the glass into the windshield frame. Unlike the local glass shop types, this tape is a special "all rubber" formula designed to look and perform like the original Ford factory type. It creates a watertight bond as it cushions the glass. Just fold tape over the glass edge and insert the glass into the frame. Excess is easily trimmed with knife. The tape is available in a variety of thicknesses. (Note: To determine the thickness you need, measure the width of glass, then the width of the channel that glass fits into. Subtract the width of glass from the width of channel and divide this figure by two. This will be tape thickness. For best results, the tape should be slightly larger than the gap. Tape comes in 20 ft. rolls. All sizes are 1.5 in. wide.)
( 25 )
$33.99
Bob Drake offers fuel tanks for a wide range of Ford vehicles. These steel replacements are available in a variety of sizes and configurations for fitment on specific cars and trucks. Order the model recommended for your application.
( 2 )
$359.99
—
$396.99
Bob Drake weld-in hole repair kits are perfect for patching unwanted holes or for adding strength to mounting hole locations. They're also great for shimming. The handy 200-piece kits include a variety of 18-gauge steel discs.
( 3 )
$51.99
Bob Drake reproduction trunk handle and base kits are works of art—no detail is overlooked. Every component perfectly matches the factory original. They are ready to install with stainless key cover and keys; handle, base, glass lens, lens gaskets, 12 V bulb, wiring, special socket, extension nuts, inner base, shaft seal, rubber pad, key cylinder with 2 keys. All mounting hardware is included with these complete kits. The replacement units are designed for a variety of Ford vehicles from the 1940s.
( 1 )
$357.99
Bob Drake offers replacement fan hubs for a variety of Ford cars and trucks from the 1940s and '50s. Old, original hubs require regular service and oil to maintain lubrication and smooth operation. Neglecting your original hub is asking for trouble and could be seriously hard your fan and radiator. The Drake team took the old originals down to the bits for a thorough examination—then designed a worry-free, no-service-needed unit with modern sealed bearings and a top-grade aluminum body with a high-strength steel shaft for years of dependable service. There's no better unit to keep your fan spinning and flathead running. Fan-mounting hardware is included. Additional details: * Two sealed, deep-groove ball bearings eliminate the need to oil and keep the unit spinning for years of use and miles of road * Body made of tempered aluminum, effectively doubling the tensile and yield strength to combat the stress of harsh RPM load conditions * Hard-anodized sheave offers greater wear resistance against high friction in belt contact surfaces * Shaft made of superior steel with added alloying elements for torsional strength and increased resistance to fatigue * Beautiful turned-aluminum surface finish provides a high performance appearance for any flathead, or simply color with high-heat paint to complement your engine's unique styling
( 2 )
$209.99
Bob Drake offers motor and transmission mounts for Ford car and trucks from the 1930s, '40s, and '50s. Designed "Ford Tuff", these mounts are also flexible enough to ensure vibration-free comfort. The upper cushion features soft rubber between the ring and shoulder washer to act as a shock absorber, as original Ford specifications called for, while the lower cushion has a metal shoulder washer for better alignment in cup. In addition to that, Bob Drake's mounts are the only ones to proudly wear the "Ford" script.
( 1 )
$29.99
Bob Drake gauge sending units are excellent replacements designed to match the fit and function of the originals. They are reproduced from quality materials to provide a long service life. Keep an accurate check on vitals with Bob Drake sending units.
( 3 )
$49.99
Bob Drake door hinge mirrors are true classics. Offered in several styles to fit your Ford's specific model year, they feature chromed arms and stainless steel heads. Bob Drake includes hardware for a correct original installation on either the left- or right-hand side of your Ford.
( 3 )
$47.99
—
$63.99
Bob Drake tack strips are semi-hard rubber seals that fit into the B-pillar support and provide the needed anchoring point for firmly installing upholstery nails and screws. They effectively replace the original dense paper-style and won't attract moisture, eliminating rust and corrosion problems. These multi-purpose strips can also be used around door frames, headliner edges, and various other areas for filling wind-gaps and insulating. The 15 ft. rolls are available in a variety of sizes.
( 12 )
$27.99
—
$30.99
Bob Drake fender welting will create a squeak-free, weather seal for proper mounting of your fenders and body panels. They are offered in grain vinyl or rubber. The grain vinyl is available in a variety of colors and features 3/16 in. bead for all fender seams. The all-black rubber fender welting has a 5/16 in. bead for fender seams or other bolt-on body parts. Not sure what fender welting color you want? Bob Drake also offers 1 1/2 in. fender welting swatch kits—color samplings—so you can make your selection or mix and match the fender welting colors for your application before purchasing a roll.
( 2 )
$27.99
—
$38.99
Bob Drake pick-up outside rearview mirrors deliver detail and quality for your classic Ford. These Officially Licensed Ford Products feature diecast and chrome plated arms, stainless steel heads rolled over tinted glass, and are FoMoCo stamped. Bob Drake exclusively offers the 6-hole mounting bar to fit all 1953-66 trucks and includes mounting hardware and rubber door grommet.
( 1 )
$104.99
Vintage license plate lights and brackets were once readily available from every speed shop—and every hot rodder had one. Bob Drake decided to bring back this bit of nostalgia. Originally there were two sizes. Drake replicated the small style because it's a lot cleaner. The quality of the originals was poor, so Drake improved the design by stamping it from stainless steel, molded a lens, added a license bracket, molded a rubber pad, tossed in some stainless screws and a 12 Vt bulb. Voila! Perfection achieved.
( 4 )
$66.99
Bob Drake offers replacement radiator support rods for a variety of 1930s and '40s Ford cars and trucks. These reproduction rods are machined from stainless steel with a polished finish. They include stainless steel thread covers.
( 1 )
$62.99
Nobody enjoys teeth-chattering rides. Solve your vehicle's vibration problem and cruise smooth with Bob Drake universal Shok-Shims—the versatile, effective body mount shims. These 50-piece variety packs contain various thicknesses to fill any gap and set your body level, while each shim's unique elastic damping material also promises many years of vibration-free cruisin'. The interlocking surface grooves prohibit sudden shifts or slippage as you stack shims or lock into our cushioning Shok-Liner (sold separately). Bob Drake shims are easy to slit for placement around pre-installed bolts and flexible enough to expand around bolts with a 5/8 in. diameter. Shok-Shims variety packs contain: * 10 each, 2 in. diameter shim sizes: -- 1/8 in. thick -- 3/16 in. thick -- 1/4 in. thick -- 5/16 in. thick -- 3/8 in. thick
Not Yet Reviewed
$66.99
Bob Drake swan neck mirrors are offered with oval heads to match the original interior mirror, or with round heads to add elegance to concours originals and hot rods. Both heads are polished, high-grade stainless steel set on gracefully curved, diecast, chrome plated arms that will add distinctive looks to any car. Bob Drake swan neck mirrors include mounting hardware and rubber mounting base pad.
( 4 )
$71.99
Clearance
Bob Drake offers wheel trim rings for a variety of Ford cars and trucks from the 1940s and '50s. These polished stainless steel beauty rings feature easy snap-on installation and are available in a variety of sizes and styles, such as smooth, ribbed, and convex.
Not Yet Reviewed
$61.99
$39.50
—
$39.99
Bob Drake universal Wheel Wizards safely remove trim rings, hub caps, and lug nuts without damaging anything. The Wheel Wizard is an ingenious tool made entirely of high-grade steel that won't bend or break. It features a 1/2 in. square socket-drive end for lug nut sockets. The tool also works great as an extended handle for hydraulic or mechanical jacks. It's the coolest wheel tool yet for everyday shop use or roadside emergencies. Keep one in the car and another handy in the shop. (Lug-nut socket is not included.)
( 2 )
$66.99
Whether a Ford '32 car or a '56 pick-up truck, Bob Drake bumper braces are available to secure front and rear bumpers with a perfect fit—just like the originals. No lightweights here, Drake's reproductions are built to take a beating. They are bent to shape from thick steel with mounting holes punched in just the right places so you can bolt it all together. Bob Drake bumper braces are offered in steel (plain or painted) and gleaming stainless steel to complement stainless steel bumpers.
Not Yet Reviewed
$176.99
—
$357.99
Bob Drake offers a variety of door hinge repair components for Ford cars and trucks from the 1930s, '40s, and '50s. From door check arms, bumpers, and washers …to hinge and cotter pins, these reproductions are machined from quality materials for an original fit and performance. Order the part needed for your vehicle application.
( 3 )
$5.99
—
$18.99
Bob Drake offers correct reproduction tailgate hinges for all 1938-56 Ford pickups and all 1957-72 Stepside models. The hinges are machined from steel with a protective black finish.
( 1 )
$11.99
While Bob Drake's motor mounts are designed "Ford Tuff" to secure the motor, they are also flexible enough to ensure vibration-free comfort. The upper cushion features soft rubber between the ring and shoulder washer to act as a shock absorber, as original Ford specifications called for, while the lower cushion has a metal shoulder washer for better alignment in cup. In addition to that, Bob Drake mounts are the only ones to proudly wear the "Ford" script. These motor mounts are available for early Ford cars and trucks from the 1930s, '40s, and '50s, order the application to fit your needs.
Not Yet Reviewed
$29.99
Bob Drake offers spring perch bolts for a variety of 1932 Ford cars and trucks. You'll be very pleased with the exceptional quality of these replacements. Stock bolts are very hard to find because they're often torched-off above the shackle-mount hole or are badly damaged during removal. Even experienced mechanics often end up beating the threads to death during removal. Order replacements and continue to restore your vintage vehicle!
Not Yet Reviewed
$220.99
Bob Drake universal peep mirrors are offered in different styles to fit your vehicle the way you want. The first has a polished stainless steel head with a standard length chrome arm, while the short arm version has built-in turn signals and a convex mirror for seeing "a little more" of what's coming up next to/behind you. Both have 4 in. heads, fit right and left-hand sides, and include mounting hardware.
( 1 )
$36.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
