Availability
Showing In Stock Items. Show All 87 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$44.99
—
$52.99
ICT Billet LS swap radiator hoses can make your swap easier. Offered as upper or lower individually or in kits with one of each, the hoses are precision designed specifically to fit your LS-swapped vehicle. They are precision formed to fit factory inlet/outlet locations, are compatible with most LS-style water pumps, and are a 1/2 in. longer in length for trimming, if necessary. Select the hose or hoses designed for your vehicle.
Not Yet Reviewed
$119.99
Classic Performance offers a line of brake hoses for easy installation when you're converting to disc brakes. Sold individually or as a kit to fit any vehicle need. Kits typically include hoses, banjo bolts, tabs, and clips; and the hoses are available in various lengths. Choose the banjo bolt sizes needed when ordering.
( 5 )
$58.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 131 )
$69.39
—
$135.27
Beat the heat with ACDelco's GM original equipment air conditioning hoses. They help you make repairs to your GM vehicle's leaking A/C system and get the cool air flowing once again. These hose assemblies also work with GM vehicles with rear A/C—where applicable; they include the auxiliary evaporator connecting hose and proper lines to connect the rear evaporator to the front A/C lines. ACDelco designs these air conditioning hoses to deliver the quality, performance, durability, and long service life you've come to expect from General Motors. Hundreds of configurations are available, with or without fittings included. Order the line recommended for your application.
( 10 )
$47.99
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 663 )
$33.99
—
$225.99
Summit Racing™ offers fuel filler neck hoses for a wide range of Chevy and GMC trucks from the 1970s, '80s, and '90s. These replacements are made from durable rubber according to factory specs to ensure proper fitment and long-lasting performance. They connect the fuel fill cap inlet to the gas tank. Order the size and configuration recommended for your vehicle.
( 3 )
$28.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 441 )
$17.99
—
$23.99
The Right Stuff offers you the best fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double flare lines with remarkable consistency. The Right Stuff fuel pump to carburetor lines are available in OEM steel or stainless steel.
( 281 )
$33.99
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 34 )
$131.99
—
$159.99
Are you tired of having leaks in your transmission lines? The Right Stuff transmission cooler lines are manufactured from quality materials to ensure performance and dependability.
( 347 )
$60.99
—
$100.99
Vintage Air offers SureFit reduced barrier modified hose kits that are designed for use with a complete Gen IV or Gen 5 SureFit system in vehicles without a stock engine compartment configuration and core support. The kits contains refrigerant hoses with pre-crimped reduced barrier beadlock fittings on one end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.
( 2 )
$194.99
Upgrade your worn out rubber brake lines with Rough Country extended stainless steel brake lines. These DOT-approved brake lines offer the necessary extra length to install your application, and are ideal for anyone who wants to swap out poor performing or decaying factory brake lines. They feature an internal PTFE layer covered by a durable braided stainless steel, keeping your lines free from off-road debris, rocks, and mud, while also preventing expansion of the internal layer--even under 4,000 psi--keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. Rough Country extended stainless steel brake lines are finished with high-quality hollow fasteners at both ends to provide a leak-free flow path. Order the ones made for your vehicle's application.
( 4 )
$49.95
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 288 )
$12.99
—
$19.99
Superlift Bulletproof Kevlar® reinforced braided stainless steel brake lines are constructed of a PTFE inner bladder surrounded by a Kevlar® reinforcing braid. They're covered with a rubber sheathing, stainless steel braid, and an outer plastic sheathing for unmatched strength and protection from foreign objects. They also feature a steel leader at the end to make sure the lines are routed away from any moving suspension components.
( 13 )
$69.99
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$7.99
—
$36.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 123 )
$18.99
—
$43.99
ACDelco Gold brake hydraulic hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each hose contains double crimped fittings to provide longer service life and durability. These Gold brake hydraulic hoses are high-quality replacement components for your vehicle's braking system. Order the model recommended for your application.
( 27 )
$10.99
Are you replacing your brake lines? The Right Stuff has you covered--even on the little things, like brake line clips. If you're in the process of restoring your classic ride, these high-quality steel clips will keep your lines in place. Get the stuff you need to complete your brake job with The Right Stuff brake line clips.
( 30 )
$4.99
OER radiator overflow hoses are perfect service replacements. Manufactured from quality rubber, these thin-walled hoses have a maximum pressure of 50 psi with a temperature range of -40 degrees F to 257 degrees F. They can be cut to the desired length, and may be used for other applications as well.
( 6 )
$5.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$19.99
—
$106.99
Dorman offers a line of brake banjo bolts in a range of thread sizes and lengths for various applications. All of their brake hydraulic hose to caliper bolts are constructed from high-quality materials for long-lasting durability. They're conveniently packaged in a variety of piece counts to assist with both small and large projects. Order the Dorman brake banjo bolts designed to fit your application.
( 29 )
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
