Availability
Eddie Marine manual control valves enable fuel flow from the right, left, or both tanks—or can shut off the fuel. These valves are manufactured from 6061-T6 aluminum and are available in a polished finish. They also feature 1/2 in. NPT inlets and outlets for high fuel flow. Note: To help deter internal corrosion of valve components, it's recommended that the valve be periodically lubricated. Valves which fail due to internal corrosion are not covered by warranty.
( 1 )
$223.95
Eddie Marine billet aluminum water dump fittings are 2 3/4 in. long. The dumps are available for three hose sizes with either a polished finish, or a variety of anodized and Fusioncoat colors.
Not Yet Reviewed
$29.95
—
$30.95
Eddie Marine stainless steel water dump fittings are available in two lengths and a variety of connection sizes and types (hose barb, AN). All of the through-hull fittings are beautifully polished.
Not Yet Reviewed
$47.95
—
$104.95
Eddie Marine replacement outboard and cable kit hoses are available in different lengths. All of these rigging hoses are made from 2 in. diameter crush-resistant black plastic tubing. Eddie Marine hose-only replacements fit their outboard hose kits and will maintain the clean-looking route from your hull to your motor.
Not Yet Reviewed
$13.95
Eddie Marine billet aluminum Mercury outboard rigging hose bezels provide your setup with a custom look. The rigging hose screws into the bezel. The bezel flange has a 3 1/2 in. diameter and requires a 2 7/8 in. hole for installation They attach with four 1/4 in. fasteners (not included). Eddie Marine hose bezels are available in a bright polished finish, as well as a variety of anodized or Fusioncoat colors to complement or accent your boat with style.
Not Yet Reviewed
$142.95
Eddie Marine billet aluminum water plates shine with a polished finish. They are available for both big block and small blocks, and they feature 1/2 in. NPT threads.
Not Yet Reviewed
$61.95
—
$66.95
Eddie Marine stainless steel water plates are fabricated with laser cut stainless steel flanges. The fittings are welded to the flanges, and then they are polished to a brilliant finish.
Not Yet Reviewed
$118.95
Eddie Marine outboard hose kits provide a clean, professional finish to your cable and hose routing project. The kits come with 6 ft. of 2 in. heavy-duty black hose and two billet aluminum flanges. Simply, mount the flanges to your hull or transom and attach a 3 ft. piece of hose to each. The flanges are available polished, anodized, or in a selection of powdercoat colors. Laying cables and hose from your hull to your motor, especially when using a setback bracket or jack plate, can be done neat and tidy with the style of Eddie Marine outboard kits.
Not Yet Reviewed
$126.95
Eddie Marine through hull pick-up tubes are designed for mounting through the bottom of your boat. Each features a length of 4 in. and a round mounting flange of 2 1/4 in. diameter. Eddie Marine through hull pick-ups are offered in several connection sizes.
Not Yet Reviewed
$61.95
—
$94.95
Eddie Marine offshore transom water pick-up tubes are fabricated from stainless steel and can be cut to your desired length and angle. These pick-ups use 1 1/4 in. tubing to pick up water and feature a 2 1/4 in. mounting flange.
Not Yet Reviewed
$142.95
Eddie Marine brass pipe plugs are available in several sizes to complete your plumbing projects.
( 2 )
$5.00
—
$10.00
Eddie Marine tee fittings provide a range of options for inline plumbing on watercraft applications—and they're ideal for flush valves or other accessories, as well. The tee fittings are fabricated from high-quality stainless steel, polished to a high luster, and come in various sizes and attachment options to best suit your specific application.
Not Yet Reviewed
$55.95
—
$65.95
Adapt to different gas fills with Eddie Marine fuel hose reducers. Decrease the diameter of your fuel hose to fit your fill with these quality-made Eddie Marine reducers.
Not Yet Reviewed
$55.95
Eddie Marine heater hose fittings are formed from a variety of metals—including chrome plated brass, stainless steel, and billet aluminum—to shine as brightly as other components under the hood, yet retain their conductivity of heat. The fittings are available in regular and extended lengths, as well as different hose barb sizes. For great heat conductivity and impressive style, choose Eddie Marine heater hose fittings.
( 4 )
$8.95
—
$84.95
Eddie Marine heat shrink clamps prove there are ways to improve upon even time-tested parts! These clamps use thermoplastic casing to seal both surfaces and form a tight bond. Simply slide the clamps over the hose surface, use a heat gun to slightly melt the material—and enjoy a long-lasting seal that will stand up to extreme temperatures and conditions. Order the heat shrink clamps in the size and diameter needed to help you complete the job.
( 8 )
$7.95
—
$14.95
Eddie Marine stainless steel hose clamps are perfect for the next plumbing project on your boat. These worm gear-style clamps are available in a range of sizes to fit most any project.
( 3 )
$2.00
—
$3.00
Eddie Marine heavy-duty T-bolt clamps are perfect for the next plumbing project on your boat. These T-bolt-style clamps are made from stainless steel and are available in a range of sizes to fit most any project.
( 1 )
$18.95
—
$24.95
Eddie Marine stainless steel line assemblies are PTFE lined braided hoses pre-assembled with hydraulically crimped-on stainless steel swivel hose ends. They are not affected by gas, oil, or temperature and will not crack or deteriorate. They are ideal for use as trim lines or for mechanical oil or fuel pressure gauge lines. Eddie Marine stainless steel line assemblies are offered in many lengths to perfectly fit your project needs.
( 1 )
$34.00
—
$40.00
Eddie Marine bypass Y-fittings assist in converting your Merc thermostat units to be used with EMI Thunder manifolds. Sold individually, two will be required to convert your 4-hose Merc unit.
Not Yet Reviewed
$85.95
Eddie Marine bulkhead fittings are stainless steel. They are available in several AN sizes and lengths to assist in your marine plumbing needs.
Not Yet Reviewed
$68.95
—
$88.95
Eddie Marine heavy-duty water hose features a 2-ply reinforced construction that resists salt water, ozone, and the elements. The hose is commonly used for engine cooling, bilge intakes, and drains. Eddie Marine offers heavy-duty water hoses in a variety of diameters and lengths. Order the amount needed for your applications.
Not Yet Reviewed
$30.95
—
$272.95
Eddie Marine reinforced vinyl tubing is for use with your marine bilge pump. This heavy-walled clear vinyl hose offers strength and rigidity to help prevent collapse or expansion under pressure. Tubing is available in a variety of lengths and diameters to meet your marine application requirements.
( 1 )
$31.95
—
$154.95
Eddie Marine Type B fuel vent hose is excellent quality standard fuel hose and meets or exceeds all requirements of new ISO 7469 and SAE J5127 standards. It is resistant to gasoline and alcohol-enhanced fuels. This reinforced-rubber hose can also be used for fuel hose in non-enclosed engine compartments. Order the length and diameter needed for your application.
Not Yet Reviewed
$38.95
—
$230.95
Eddie Marine corrugated fuel fill hose is perfect for longer runs which require the tightest bends. The hoses feature multi-ply corrugated construction with a double wire helix embedded between the multiple plies. They are premium-quality, fire-retardant, and resistant to gasoline, diesel, and alcohol-enhanced fuels. Order the length and diameter needed for your application.
( 1 )
$23.95
—
$148.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
