Availability
BMR A-arms stabilize your vehicle. A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. BMR Suspension A-arms are fabricated from heavy-duty 0.095 in. wall DOM tubing with laser-cut, CNC-formed plate steel for extra strength and to eliminate deflection. BMR A-arms are fitted with heavy-duty ball joints and 95-durometer polyurethane bushings for a solid, more responsive feel over the stock rubber bushings. Polyurethane adds strength and reduces deflection over the stock rubber bushings, while still absorbing much of the NVH, providing you with a great blend of performance and comfort. Designed for street performance, drag race, handling, and pro-touring applications, BMR A-arms give you improved geometry and increased lateral grip during cornering situations.
( 108 )
$299.95
—
$1,029.95
BMR Level 2 suspension handling packages are matched and developed to handle the twists and turns of your favorite road. Installation of these American-made components takes only a few hours of your time with basic hand tools. You can install superior handling on your ride today with BMR Level 2 Suspension handling packages. These BMR Level 2 handling packages include: * Lowering springs * Front and rear sway bars * Bilstein shocks * Upper and lower A-arms * Rear upper and lower control arms * Control arm mount braces
( 8 )
$2,349.00
BMR Suspension motor mount kits will curb engine shift--wasting less horsepower, reducing vibration, and improving throttle response. These bolt-in units come complete with brackets and hardware and are available in red or black hammertone powdercoat finishes. BMR kits afford you greater performance over the stock oil-filled hydraulic bushings designed for comfort.
( 27 )
$79.95
—
$279.95
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$179.95
—
$659.95
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 486 )
$99.95
—
$389.95
Your vehicle's "instant center" determines it's ability to transfer weight upon acceleration for better traction. BMR lower control arm relocation brackets move the instant center of your vehicle by changing your control arm angle. These brackets will allow you to tune in the instant center of your chassis, an essential for racing or lowered vehicles.
( 51 )
$89.95
—
$139.95
BMR transmission conversion crossmembers allow you to swap your choice of transmissions into your vehicle. They bolt to your OE frame points using existing mounting holes with no welding or drilling required.
( 21 )
$129.95
—
$449.95
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 199 )
$79.95
—
$929.95
Heavy-duty BMR panhard bar relocation brackets bolt to existing mounting holes without welding or drilling. BMR brackets install simply without affecting rear-end geometry and provide the additional clearance you need to complete your project. They come available in black hammertone or red powdercoated finishes.
( 25 )
$69.95
—
$119.95
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 23 )
$369.95
—
$719.95
BMR rear cradle bushing kits are designed to help minimize wheel hop and reduce rear cradle movement in your vehicle. They're manufactured from low-deflection polyurethane or Delrin for maximum strength and durability. Install a set of these, and the results are better handling and more consistent launches without significantly increasing noise, vibration, or harmonics. Select the kit designed for fitment with your make and model.
( 9 )
$36.95
—
$619.95
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$329.95
—
$839.95
Minimize wheel hop and enhance rear stability with BMR Suspension differential bushings. They are far superior to factory bushings and drastically decrease differential movement and pinion rise. BMR bushings replace the entire OE bushing and are manufactured to strict tolerances for a perfect fit and increased performance. They will survive exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment. Several kits include heavy-duty hardware; while not necessary for all customers, BMR supplies the upgraded hardware for those who have higher power levels or plan on launching hard on the street or at the dragstrip. This hardware upgrade may require slight modification to the rear differential mounts. BMR Suspension differential bushings are available in: * Polyurethane--a synthetic polymer that deflects far less than rubber without excessive increases in noise, vibration, or harshness. * Delrin--a solid synthetic polymer that eliminates deflection and drastically increases differential stability. They are machined from solid Delrin and are intended for extreme performance street, drag race, and handling applications. * Billet aluminum--doesn't deflect and can also withstand much higher temperatures than rubber, polyurethane, or Delrin; making it a great choice for race cars where the differential creates large amounts of heat for extended periods of time.
( 17 )
$39.95
—
$419.95
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
—
$559.95
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$129.95
—
$599.95
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$329.95
—
$749.95
Prevent your rear axle from moving side to side with BMR Suspension panhard bars. Factory bars use rubber bushings, allowing for deflection under a load. BMR panhard bars are made from heavy-walled tubing and employ either greasable polyurethane bushings or heavy-duty spherical bearings. Adjustable versions feature left hand and right hand threads for easy "on-car" adjustment. They are a must-have when lowering your ride or trying to fit the widest tires possible in your wheelwell.
( 100 )
$99.95
—
$299.95
If your back wheels lack the consistency to stay the course, bolt up a pair of BMR toe rods. Their toe rods do for your rear wheels what tie rods do for your front-end. Unlike factory rods with rubber bushings, BMR toe rods are manufactured from heavy-duty, heavy-wall DOM tubing with spiral-fluted, low-deflection polyurethane bushings. Toe rods are bead-blasted and given a durable, powdercoated finish in either red or black hammertone. They come available in adjustable and non-adjustable styles and BMR also offers adjustable toe rods with rod ends.
( 5 )
$229.95
—
$419.95
BMR adjustable control arm mounts provide a world of possibilities in different colors for your vehicle's suspension performance. The middle hole on these components will retain the same geometry as your factory mounts, and by raising or lowering the angle of the upper arms, you'll be able to adjust your roll center and camber gain. Get the style and handling performance you want with an assist from the BMR adjustable control arm mounts best suited for your application.
( 5 )
$189.95
BMR replacement control arm bolts include all-new hardware for installing upper or lower rear control arms on your vehicle. They're made of Grade 8 steel and include washers and nylon insert locknuts. The bolts are yellow zinc plated for maximum corrosion resistance.
( 34 )
$18.95
—
$51.95
Responsible for locating the axle, setting pinion angle, and controlling rear-end movement, leaf springs are a critical part of the rear suspension. BMR Suspension lowering leaf springs are superior to stock leaf springs that sag, rust, and do little to control axle wrap and wheel hop as they get older. BMR's spring design, combined with precise clamp locations, give you less wheel hop and more axle control. Their design reduces axle wrap that causes the spring to load and unload. By eliminating this oscillation, wheel hop is minimized and traction is improved. BMR lowering leaf springs are engineered for street performance, drag race, and handling applications. Not only a great way to add an aggressive look, they also improve handling by lowering the rear center of gravity and reducing body roll. New rubber bushings in the front give you a smooth, quiet ride, and polyurethane rear bushings greatly reduce deflection. They also come with PTFE antifriction pads for smooth, quiet travel throughout the spring's range of motion, which further reduces noise, vibration, and harshness. Combine BMR lowering leaf springs with BMR front lowering springs for a level, aggressive stance with huge improvements in handling and performance.
( 10 )
$479.95
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 7 )
$109.95
—
$239.95
BMR Level 2 cradle bushing lockout kits reduce wheel hop, bushing deflection, and cradle movement. The kits contain CNC-machined 6061 T-6 billet aluminum upper bushing lockout rings, CNC-formed stainless steel lower bushing support plates, and heavy-duty 1 5/8 in. DOM steel tubing cradle braces. BMR Level 2 cradle bushing lockout kits are 100 percent bolt-in, utilizing existing bolt holes and hardware. BMR Level 2 cradle bushing lockout kits: * No fabrication needed * Installs with simple hand tools * Laser-cut lower bushing support washers * Positively locates the rear IRS subframe * Greatly reduces stock subframe bushing deflection and wheel-hop * Uses factory bolt-holes and hardware * Adds a solid rear jacking point to each side of the vehicle * Durable powdercoat finish in black hammertone and red
( 9 )
$199.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
