Availability
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 486 )
$99.95
—
$389.95
Your vehicle's "instant center" determines it's ability to transfer weight upon acceleration for better traction. BMR lower control arm relocation brackets move the instant center of your vehicle by changing your control arm angle. These brackets will allow you to tune in the instant center of your chassis, an essential for racing or lowered vehicles.
( 51 )
$89.95
—
$139.95
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
—
$559.95
Responsible for locating the axle, setting pinion angle, and controlling rear-end movement, leaf springs are a critical part of the rear suspension. BMR Suspension lowering leaf springs are superior to stock leaf springs that sag, rust, and do little to control axle wrap and wheel hop as they get older. BMR's spring design, combined with precise clamp locations, give you less wheel hop and more axle control. Their design reduces axle wrap that causes the spring to load and unload. By eliminating this oscillation, wheel hop is minimized and traction is improved. BMR lowering leaf springs are engineered for street performance, drag race, and handling applications. Not only a great way to add an aggressive look, they also improve handling by lowering the rear center of gravity and reducing body roll. New rubber bushings in the front give you a smooth, quiet ride, and polyurethane rear bushings greatly reduce deflection. They also come with PTFE antifriction pads for smooth, quiet travel throughout the spring's range of motion, which further reduces noise, vibration, and harshness. Combine BMR lowering leaf springs with BMR front lowering springs for a level, aggressive stance with huge improvements in handling and performance.
( 10 )
$479.95
BMR adjustable control arm mounts provide a world of possibilities in different colors for your vehicle's suspension performance. The middle hole on these components will retain the same geometry as your factory mounts, and by raising or lowering the angle of the upper arms, you'll be able to adjust your roll center and camber gain. Get the style and handling performance you want with an assist from the BMR adjustable control arm mounts best suited for your application.
( 5 )
$189.95
BMR lowering spring kits will improve your ride's handling performance by lowering its center of gravity for tighter suspension and reduced body roll and wheelwell gap. BMR lowering springs are cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss. They're designed for additional spring rate in the stiffer portion of the springs, perfecting the above during aggressive cornering. BMR lower spring kits include front and rear springs to optimize the balance between performance and comfort and give you that precision sports car look and feel.
( 33 )
$239.95
—
$359.95
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
Add the ultimate lateral differential location device to your vehicle with BMR Watts link kits. They locate the rear-end housing and eliminate lateral axle movement by keeping the differential centered under the car throughout the suspension's entire range of motion. Manufactured from heavy-duty rectangular or drawn over mandrel (DOM) steel tubing and laser-cut steel plate, BMR's kits are the ultimate in strength. Double-shear link mounts connect the adjustable links to the center pivot for strength and zero deflection. Center pivots use a double-shear mount with a greasable Delrin bushing for smooth, bind-free movement. The links are built from heavy-duty aluminum with left and right hand threaded rod ends for easy on-car adjustability. They feature zinc-plated, heat-treated, chromoly, self-lubricating, PTFE-lined rod ends and, where applicable, high-durometer polyurethane bushings. They also feature 304 stainless steel, custom-designed rod end spacers. BMR designed their Watts link kits to work well for street performance, drag race, and road race applications. They are 100 percent bolt-in and require no cutting or modifying of the chassis. The kits are adjustable, allowing for fine-tuning and bind-free suspension articulation. Center pivots can be installed in several positions for multiple roll center locations. With strength, adjustability, and zero lateral axle movement, they are the perfect upgrade for the enthusiast that requires maximum performance from their suspension. BMR Suspension's Watts link kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3 to 4-hours.
( 1 )
$909.95
—
$999.95
Hefty BMR upper control arm mounts are just what you need to support the load of your upper control arms. BMR upper control arm mounts are direct replacements for OE and install without drilling. Made from 1/4 in. plate, BMR's mounts can be bolted or welded into place and comes with dual control arm mounting points for changing instant center.
( 7 )
$99.95
Your vehicle's "instant center" determines it's ability to transfer weight upon acceleration for better traction. Move the instant center of your vehicle by changing your control arm angle with BMR upper control arm relocation brackets. These control arm brackets will allow you to tune in the instant center of your chassis, an essential for racing or lowered vehicles.
( 4 )
$99.95
BMR upper panhard rod boxed tube supports reinforce this critical mount to prevent deflection and can be easily installed. Since the panhard rod is responsible for keeping the rear-end centered in the chassis, there is a significant load placed on the panhard rod mounts during cornering. Keep your rear-end where it belongs with BMR upper panhard rod supports.
( 12 )
$89.95
If you've installed BMR Suspension's WL002 watts link on your Fourth Gen F-body—or a WL005 or WL006 watts link on your S197—and want the ultimate in strength and performance, BMR's billet aluminum center pivot upgrade is the perfect addition. A watts link locates the rear-end housing and eliminates lateral axle movement by keeping the differential perfectly centered under the car through the suspension's entire range of motion. These center pivots are CNC-machined from 6061-T6 billet aluminum and are black anodized for a great looking, durable finish. They use a double sheer mount to the crossmember with a greaseable Delrin bushing for smooth, bind-free movement. The pivots work with both the rod end and polyurethane configurations. BMR Suspension designed the WL007s to work well for street performance and handling applications. The watts link pivots are 100-percent bolt-in and require no cutting or modifying of your existing watts link. They also don't change the level of adjustability found in the WL002, WL005, or WL006 watts link kits. The billet aluminum construction means reduced weight and increased strength. When performance is a must, rely on BMR Suspension!
( 1 )
$199.95
BMR Suspension Trak Paks eliminate traction problems by relocating the torque arm front mount. The shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. BMR Trak Paks are equipped with a rear adjuster to allow on-car pinion angle adjustments for dragstrip tuning. The crossbar requires welding and professional installation.
Not Yet Reviewed
$569.95
BMR torque arm suspension kits are designed to eliminate the rear leaf springs, replacing them with a custom upper crossmember, adjustable control arms, and adjustable coilover shocks. They will provide lateral stability for acceleration and traction, and centered suspension articulation for bind-free handling. The kits feature a precision side-to-side axle positioning Watts link. The Watts link pivot is machined from 6061 billet aluminum and utilizes greasable, internally fluted Delrin bushings for a long, trouble-free life. Best of all, the Watts link is double-shear supported, unlike any other designs on the market today. Every component in the BMR torque arm suspension kits is completely adjustable. The torque arm itself provides pinion adjustability. The control arms are adjustable in length and have multiple mounting holes plotted in an arc to provide adjustment for anti-squat characteristics, giving your ride superior handling and traction. Help your street machine or track car realize its full potential with these BMR torque arm suspension kits.
( 2 )
$2,249.95
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 199 )
$79.95
—
$189.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
