Availability
Showing In Stock Items. Show All 29 Items.
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$446.95
$402.26
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$509.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$234.99
$144.89
—
$211.49
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$562.95
$506.66
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$999.95
—
$1,499.95
$898.95
—
$1,348.95
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$325.99
—
$474.99
Summit Bucks
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$43.99
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$515.95
—
$549.95
On Sale
These Holley intake manifold adapter kits let you mount older intake manifolds to the newer style center-bolt cylinder heads. They include four angled spacers with matching Allen head bolts to adapt Holley intake manifolds to the new-style heads.
Not Yet Reviewed
$399.95
$359.95
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$304.99
—
$578.99
On Sale
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
—
$649.95
$566.95
—
$583.95
OMIX-ADA offers direct OE replacement Jeep parts and accessories built to the original specifications including EGR valves. These replacement EGR valve regulators will replace the cogged unit to restore proper functionality. Whether you're looking to maintain, optimize, or upgrade, choose OMIX-ADA for quality replacement parts so that you can keep you part of the Jeep heritage on the road. Select the model designed for your application needs.
Not Yet Reviewed
$216.99
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 38 )
$56.99
—
$570.99
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 45 )
$600.99
On Sale
Crown Automotive EGR valves will work with your engine management system to control your vehicles emissions. They are quality units designed and engineered to fit and function just like the originals they are replacing. Keep your Jeep, Dodge, Ram, Chrysler vehicles running properly with help from Crown Automotive. Valves will include gaskets unless otherwise noted.
Not Yet Reviewed
$104.99
—
$112.99
$94.49
—
$101.69
Stick on horsepower! Heatshield Products I-M shields reduce heat radiating from the top of the motor significantly. This creates a more dense fuel and air mixture, in turn creating more power. Think of them as intercoolers for your intake, with the same physics and chemistry, but just a different execution. They include heavy-duty adhesive that will stick to any clean, semi-smooth surface. Simply degrease and clean the surface, wipe it with pre-paint cleaner or isopropyl alcohol, let it dry, and then firmly press the Heatshield Products I-M shields onto the underside of the intake manifold. Features include: * Withstands 1,100 degrees F radiant continuous, 2,000 degrees F intermittent * Adhesive good for 300 degrees F * Lower intake temperatures * Increases up to 12 RWHP
( 27 )
$83.99
Mopar Replacement EGR valves will restore proper control of the flow and recirculation of exhaust gasses. They are quality components providing the OE-fit and function, as well as reliability and durability you expect and need. Service your Chrysler, Dodge, Plymouth, or Jeep with genuine Mopar Replacement EGR valves for the best performance and peace of mind on the road. Order the model needed for your vehicle application.
( 4 )
$345.99
Mopar Replacement vapor canister purge valves will restore control over fuel vapor emissions. These replacement parts provide the proper fit and function for servicing your Chrysler, Dodge, Plymouth, and Jeep emission systems. Ensure top performance and peace of mind when you choose genuine Mopar vapor canister purge valves. Order the model designed for your specific vehicle.
( 2 )
$34.99
Dorman EGR valves effectively recirculate exhaust gas to be re-burned in the intake manifold where the engine can burn it again. This reduces emissions and ensures that your vehicle is performing at its maximum potential. When your EGR valve isn't working properly, it can result in reduced performance or increased fuel consumption. Dorman parts are direct-fit replacements to ensure a proper fit.
( 10 )
$49.95
Dorman intake manifold runner control valves are designed to stay closed at lower rpm to improve low-speed and cold-engine performance. At higher rpm, the valves completely open to improve high-speed engine performance. Get your engine performing at its best again with one of these Dorman intake manifold runner control valves.
( 12 )
$96.95
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$51.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
