Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Parts and Accessories
Classic Performance Power Steering Conversion Kits
Classic looks are great but the handling ... well, not so much. Classic Performance has designed, engineered, and tested their power steering conversion kits to make your vehicle navigate as good as it looks! CPP kits include their 400 or 500 Series power steering boxes that utilize the latest steering technology and assure smoother handling of your classic/vintage ride. Other kit components may vary, but whether your special ride is a full size Chevy car or a Ford pickup Classic Performance will make it better with one of their many power steering conversion kits.
( 124 )
$889.99
—
$899.99
On Sale
DiabloSport Modified PCMs
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$921.95
—
$972.95
On Sale
DiabloSport inTune i3 PCM Swaps
DiabloSport inTune i3 PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Select the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
Not Yet Reviewed
$899.95
$808.95
On Sale
DiabloSport Trinity 2 EX PCM Swaps
DiabloSport Trinity 2 EX PCM swaps deliver the sleek look of their advanced T2 programmer, while you enjoy more power and improved drivability. Each swap kit sets you up with Trinity 2 EX high-resolution 5 in. capacitive touch screen with full-swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. DiabloSport PCM swap kits include a one-time, free cross shipment of an unlocked PCM directly to you. This allows you to swap the PCM in your vehicle, without disabling the vehicle for long periods of time to send the PCM in to be unlocked. And DiabloSport modified PCMs offer some of the best mods in the industry. The swaps will also include an OBD2 extension cable that will be required to install in order to allow tuning and monitoring on that dash. DiabloSport Trinity 2 EX PCM swaps are best-in-class tuning solutions for your vehicle.
Not Yet Reviewed
$920.95
$827.95
—
$920.95
LimeWorks 16 in. Banjo Steering Wheels
LimeWorks 16 in. Banjo steering wheels are reproductions of 1935-37 Ford original equipment wheels. They feature black-painted Ebonite rims, are machined from billet stainless steel, and hand-welded. Each individually molded wheel requires a great amount of care and preparation before they are ready for your repair or complete restoration. A horn button is included. LimeWorks 16 in. Banjo steering wheels are available with your choice of GM column spline or Ford taper and key adapters. The GM adapters fit any 1928-80 original equipment GM (tilt and non-tilt) steering columns; Ford taper and key adapters work with any 1928-48 Ford OE columns. Both adapter styles can also be used with select LimeWorks steering columns, and some other aftermarket steering columns. 16 in. Banjo horn button options include: * Solid black * Ford emblem * V8 emblem * Embossed V8 emblem * Ford De Luxe script
Not Yet Reviewed
$999.99
Stifflers Suspension Ridetech HQ Coilover Shock Kits
Stifflers Suspension Ridetech HQ Series coilover shocks are specifically designed as bolt-in kits for use with Stifflers lower control arms (sold separately), providing superior ride quality and handling to your F150. These kits include coilover shocks, springs, and all necessary hardware to facilitate the installation. Additional features of Ridetech HQ Series shocks: * Monotube design allows for superior ride and handling * One-piece impact forged body with hard coat external anodizing * Hardened shaft * Adjuster knob allows 26 clicks of rebound adjustment * External and internal bump stops built-in * Billet end cap with integrated debris wiper to prevent seal damage * PTFE piston wiper and progressive valving allow consistent piston/bore contact and repeatable performance * Housing bore is cathode anodized for years of wear resistance * Long-lasting Kevlar® lined bearings allow wide articulation with low noise * Lower control arm (FLCA-FT02) not included Note: One of the most critical factors is matching the correct stroke shock to your desired ride height.
Not Yet Reviewed
$779.95
On Sale
DiabloSport Trinity 2 EX Platinum PCM Swaps
DiabloSport Trinity 2 EX Platinum PCM swaps saves factory settings and returns easily to stock. Trinity T2 Platinum PCM swaps are designed for those who want the best of both worlds, pre-loaded, high performance tunes in addition to custom tuning capability. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows you like to bolt-on upgrades and extract every bit of horsepower out of your vehicle. That is where CMR custom tuning comes in. Their nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. These kits offer the most advanced performance programmer and monitoring setup of its kind. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Taking advantage of DiabloSports cutting-edge PCM Swap program allows you to focus on the sleek, new look with T2, while enjoying power and improved drivability, and the swap process is seamless, affordable, and best-in-class.
( 2 )
$1,024.95
$827.95
—
$921.95
Gotta Show Products A/C Hose Kits
Gotta Show Products A/C hose kits are the real deal when it comes to plumbing the air conditioning system in your hot rod, classic, truck, or custom build. They deliver 100 percent stainless steel construction—not plated—and are ready to polish. All fittings are female O-ring formed, making them compatible with any aftermarket A/C system. These cut-to-fit kits may include hoses, drier fittings, condenser fittings, and bulkhead or evaporator fittings. From the firewall forward, complete your A/C system with Gotta Show hose kits.
( 2 )
$752.99
—
$849.99
On Sale
Earl's Performance UltraPro Hoses
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$899.95
Peterson Fluid Systems R4 Oil Pumps
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
( 2 )
$832.99
Eddie Motorsports Billet Hood Hinges
Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.
( 136 )
$820.95
CA Seat Cover Upholstery
CA seat cover upholstery updates your car's interior style. Made from premium materials with a quality fit, they are a great choice for your restoration. Add a new look and feel to your car's seats with CA upholstery.
( 2 )
$809.99
—
$999.99
Hughes Performance Tow Master Series Torque Converters
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$769.99
—
$786.99
Hughes Performance XTM Heavy-Duty Towing Series Torque Converters
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$772.99
—
$904.99
Hughes Performance Street Master Torque Converters
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 237 )
$842.99
—
$952.99
Hughes Performance Street Rod Torque Converters
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$776.99
Hughes Performance Fuel Miser Torque Converters
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$801.99
JE Pistons Sport Compact/European Pistons
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for European, import, and sport compact applications. Engineered, forged and machined, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. JE Pistons sport compact/European pistons are engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength of 2618 aluminum alloy. Their domed or dished tops require no deburring or preparation and feature smooth-flowing radii for excellent flame travel. High-quality wrist pins, locks, and JE Pro Seal premium piston rings are included. JE Pistons' performance has been proven in victory lane time and time again. Available individually and in sets, equip your engine with the best in forged pistons. Features: * Designed specifically for each engine and use application to provide optimized performance durability * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
Not Yet Reviewed
$899.99
Stainless Works Header Builder Kits
Stainless Works offers a wide range of header builder kits for your customization projects. The 304 stainless steel header builder kits include two 3/8 in. thick laser-cut flanges (to be specified by customer), 12 J-bends (one 6 in. long leg and one 12 in. long leg), two formed collectors, and two filler diamonds to connect the tubes together. Specify desired flange style; and choose your primary tube and collector diameters. All tubes are mandrel-bent for optimal flow in the J-bends. Order the header builder kit with options desired for your exhaust system.
Not Yet Reviewed
$760.00
—
$926.25
Manley Severe Duty Series Gen II Custom Valves
These Severe Duty Gen II custom valves with unmatched strength and superiority are the only valves of their kind. Exhaust material XH-428 and intake material NK-844 are paired together for ultimate dominance over all others. With four times the tensile strength of competitors' intake valves and supremely better fatigue life, Manley Severe Duty Gen II custom valves truly show their commitment to seeing that you're there at the finish. You decide the head diameter and seat and margin widths, as well as valve length, groove type, and location for the perfect custom setup!
Not Yet Reviewed
$933.59
Ranger RWB-2D Heavy-Duty Work Benches
The Ranger RWB-2D is a large dual-shelf heavy-duty work bench that helps you keep your shop clean and organized. With two high-quality locking drawers to keep smaller items organized and safe, and almost 12 sq. ft. of work area, these Ranger work benches are perfect for preparing and working on projects of all sizes. The classic "Ranger red" coloration is bolstered by an electrostatic, oven-baked protective powdercoating and work benches durable rolled edge steel construction provides superior rigidity. When you need a sturdy work bench for a big job, the Ranger RWB-2D HD work benches are the perfect workshop companion. Features and specs: * 5/32 in. heavy-duty rolled edge steel * Electrostatic oven-baked powdercoat finish * Rolled edges for added strength and rigidity * Work bench is wide enough to let you hammer, wrench, and assemble what you need to, while offering plenty of room for tools, parts, nuts, bolts, etc. off to the side * A single wide shelf is positioned to let you keep larger objects stowed conveniently near your feet * Two locking drawers with tumbler key-lock pivot drawer latching system keep smaller items organized and safe when not in use * Full-extension smooth ball bearing drawer slides on both drawers for minimum maintenance
Not Yet Reviewed
$875.00
Ranger RWB-2S Workbenches
Ranger RWB-2S workbenches offer dedicated work areas designed to handle the physical rigors of any busy shop or garage. These full-size models feature two long high-quality shelves for storage and 14 sq. ft. of bench top to work efficiently. Their durable electrostatic oven-baked powdercoat, ensures a chip-free, weather and chemical-resistant surface area that will last for many years of productive ownership. RWB-2S workbenches provide the best in quality, size, and time-tested Ranger durability. Additional features: * Glossy, red finish * Rolled edges for added strength and rigidity * 5/32 in. heavy-duty rolled edge steel tabletop * 3/32 in. heavy-duty rolled edge steel shelves
Not Yet Reviewed
$950.00
JE Pistons 350/400 Small Block Dome Top Pistons
JE Pistons 350/400 small block dome top pistons are high-compression pistons that are compatible with most aftermarket 23 degree heads and are ideal for drag race and Circle Track applications. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC ring grooves are designed for 1/16, 1/16, 3/16 rings. However, these will not fit JE Pistons Pro Topline or Brodix cylinder heads.
( 1 )
$925.16
On Sale
Ranger 1 Ton TransJaks
When you need to lift a ton of weight, Ranger 1 ton TransJaks are the professional's choice. These powerful, multi-tasking--and very reliable--lift systems are essential to repair and service any drivetrain component. Ranger TransJaks offer maximum durability with heavy-steel construction, friction-minimizing steel roller bearings, and an extra-wide base with four heavy-duty swivel ball bearing casters that provide a low center of gravity and exceptional maneuverability. Plus, they're fitted with heavy-duty chain anchors and a failsafe overload system so you can feel secure--even with all of that metal up in the air. TransJaks from Ranger have everything you need to tackle large stuff, yet they're convenient and mobile enough for smaller jobs. More TransJaks features include: * Foot-operated pump * 2-stage design * Adjustable saddle tilts two ways and slides the other two directions * Hardened chromoly ram * Double-sealed hydraulics to prevent contamination for longer service life * Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * 2-stage design provides an extended lifting height of over 73 in. * Two individual push/pull handles for extra handling capability
( 14 )
$1,050.00
$975.00
