Availability
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,587.80
—
$1,737.79
Summit Racing™ TH400 transmission cases are a street/strip version of the TH400 aftermarket SFI transmission case. The bellhousing is not included and must be purchased separately. A direct replacement for the GM case, Summit Racing™ cases use a permanent mold casting to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. The 2-piece design allows them to be used with all popular engines by simply changing bolt-on bellhousings. Features include: * Speedometer and governor provisions * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Accepts all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers
( 2 )
$1,899.99
Summit Racing™ 72 in. rolling cabinets offer quality mobile tool storage for your garage or shop. They will keep your tools easily accessible and safe. Plus, with 16 drawers (one top right, 6 left, 4 right, and 5 middle) they will help to keep your tools tidy, organized, and ready to work right beside you.
( 1 )
$1,599.99
Summit Racing™ tunnel ram and carburetor Pro Packs are made for horsepower, pure and simple. For folks with smaller cubic inch engines, we offer Weiand tunnel ram intakes with 450 cfm Holleys that'll deliver the horsepower you crave without saddling your rig with too much carb. For big-motor fans, we have the combo with 600 cfm Holleys. We include the linkage, too! Choose the cylinder head style application needed for your specific vehicle, and enjoy the enhanced performance of a Summit™ Pro Pack!
( 6 )
$1,674.84
—
$1,971.84
Summit Racing™ 9 in. Ford Grand National rear-end assemblies are a good choice for your Circle Track race car. Offering quality-built performance at competitive pricing, our Summit Racing™ rear-end assemblies will keep you circling with the big boys without empting your wallet. These full-floating 9 in. Ford Grand National assemblies offer safety on the track and are delivered with a floater housing, lightweight hubs, rotors, solid axles built from 8620 heat-treated steel, bearing seals, rotor bolts, and lug nuts. Assemblies come with new stamped centers manufactured in the USA and are available with 28 or 31-spline solid axles. Axle tubes are turned for the easy installation of birdcages and suspension mounts. And, just like the big boys, the axle caps are red and etched with the Summit Racing™ logo. Do you need a little more grip in the corners? Or, maybe you got a little too chummy with the wall? No matter the reason, you've chosen wisely--Summit Racing™ 9 in. Ford Grand National rear-end assemblies.
( 1 )
$1,593.97
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,500.97
—
$1,505.97
Summit Racing™ Max EFI LS 750 fuel injection systems are efficient, self-tuning kits for your LS engine. These multi-port systems combine an aluminum intake manifold available in two profiles and port sizes, transmission control, and either a 92 or 102mm billet aluminum throttle body. The systems are available in two finishes and are timing control and power added compatible. Fire up the performance of your LS engine with our Summit Racing™ Max EFI LS 750 fuel injection systems. Select the kit with the specs and finish desired for your LS-based engine. Features: * 4.4 in. color touch screen hand-held controller * Multi-port fuel rails * 55 lbs./hr. injectors * Plug-and-play wiring harness * Calibration module * Oxygen sensor * MAP sensor * Tall or short manifold profile * Cathedral or rectangle port * 92mm or 102mm diameter throttle body * Black or natural finish
Not Yet Reviewed
$1,999.99
Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.
( 1 )
$1,539.98
On Sale
Put the hot in your LS engine with a Summit Racing™ Turbocharger Hot Side combo kit. Our tech experts put together these kits with performance-proven components to help make your turbo conversion a lot easier without the hassle of mixing and matching parts. The many benefits of these LS Hot Side turbo and manifold kits include simplicity and cost-effectiveness, strong mid-to-high RPM power, rapid turbo response, and robust construction. Kits include the following: exhaust manifold, wastegate actuator, gaskets, and hardware for installation. Order the Hot Side combo kit for your application.
Not Yet Reviewed
$2,000.93
—
$2,096.93
$1,868.93
—
$1,995.99
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$1,595.99
—
$1,888.99
Our Summit Racing™ tunnel ram kits are made for horsepower, pure and simple. For you guys with smaller cubic inch engines, we have tunnel ram kits with 450 cfm carburetors; they'll give you the horsepower you crave, without saddling you with too much carb. For big motor fans, we have the kits with 600 cfm carburetors.
Not Yet Reviewed
$1,920.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
