Availability
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 32 )
$301.95
—
$499.95
On Sale
Hooker Blackheart Gen III Hemi swap headers are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for an aftermarket exhaust system. These high-quality long tube Tri-Y swap headers are made from 304 stainless steel and feature 3/8 in. thick flanges, 18-gauge with 1 7/8 in. primary tubes, and 3.00 in. collectors. These swap headers provide clearance to the brake booster, steering shaft, starter motor (both left and right side mounted starters), and provide clearance for several automatic and manual transmission options. This highly engineered swap system eliminates the installation guesswork, and compatibility uncertainty that is common with universal swap parts.
( 2 )
$376.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 937 )
$699.95
$280.95
—
$969.95
On Sale
Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter
( 25 )
$299.95
—
$337.95
Hooker clamshell engine mounts can be used for a variety of GM vehicle applications. They feature thicker, heavy-duty steel construction covered with a durable powdercoated finish. They are designed with dowels that allow halves to be easily aligned, and there is no need to drill rivets from existing shells. Replace your engine mount housing with Hooker clamshell engine mounts.
( 24 )
$26.13
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 45 )
$1,149.95
—
$1,349.95
On Sale
Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 129 )
$299.95
—
$380.95
Hooker Blackheart engine mount inserts are for use with Hooker Blackheart Clamshell engine mounts, and have been designed with durability, performance, and ease of installation in mind. They are available in both black and red, and feature factory-style indexing tabs to help with alignment during installation. The Blackheart engine mounts and inserts are sold individually. Features of Hooker Blackheart engine mount inserts include: * Heavy-duty thermoplastic polyurethane overmold for durability in high-horsepower applications * Polyurethane overmold fully encapsulates/interlocks the inner metal core to reduce the risk of part separation * Heavy-duty, zinc plated inner core for durability and corrosion resistance * Polyurethane around through-bolt provides cushion and prevents metal-to-metal contact
( 22 )
$30.68
—
$33.75
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$102.95
$66.95
—
$199.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 219 )
$1,249.95
$577.95
—
$1,299.95
On Sale
Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.
( 9 )
$999.95
$349.95
—
$649.95
Hooker Blackheart transmission mounts are constructed of durable polyurethane to handle the stress and vibration of high-horsepower applications, while still lasting longer than rubber mounts. Their 3-hole design allows multiple mounting options for factory chassis or custom hot rod applications, and they feature a unique built-in safety lock to keep from separating under high-torque loads. Features: * Can be used in place of 1-bolt or 2-bolt mounts * Absorbs vibration and last longer than rubber * Ideal for use on street or strip applications * Molded indentions for socket clearance to ease installation * Complete with Grade 8 mounting hardware
( 6 )
$43.21
—
$47.52
Hooker manifold-back Competition exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 37 )
$399.95
Hooker Super Competition sidetubes are designed to slip directly onto the collector for a leak-free seal. They're available in your choice of coatings and are the perfect complements to your sidemount headers.
( 25 )
$466.95
—
$699.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$299.95
$164.95
—
$349.95
Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)
( 1 )
$1,399.95
—
$1,692.95
Hooker Super Competition exhaust header gaskets are precision-machined to provide a sure fit and unmatched exhaust sealing. These OEM-quality gaskets feature a thick (.060 in.), synthetic, high-temperature gasket material with a perforated steel core for superior grip and adhesion. This construction also promotes a precise fit between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions. Don't take chances with your repair or restoration--order the Hooker Super Competition exhaust header gaskets designed to fit your application.
( 44 )
$25.59
—
$29.90
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$369.95
$186.95
—
$299.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$399.95
$219.95
—
$386.95
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$399.95
$219.95
—
$449.95
On Sale
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$211.95
$116.95
—
$249.95
When installing a set of aftermarket headers, you'll often need to mount various accessories to the stock manifolds, and that's why Hooker air conditioner mounting brackets feature precision-machining that makes attachment easy. Hooker's durable mounts work on a variety of small block engines, including many Chevy cars and trucks from the mid-1950s through the mid-1980s. More product features include: * Adjustable hardware comes with a set of screws * Available for both the driver and passenger side of the block *Built to accommodate axial style A/C compressors
( 6 )
$64.85
—
$67.45
Improve your exhaust flow by 23 percent with Hooker Aero Chamber mufflers. They are designed to do much more than simply muffle exhaust noise; they produce a deep throaty rumble that will not change--ever! Plus, Aero's aerodynamically designed chambers flow better to deliver more horsepower and torque thanks to their unique step principle. The stepped acceleration chamber increases exhaust gas velocity for maximum flow. An aerodynamic lens directs sound pressure into and out of the muffler while resonance chambers and sound absorption chambers create the sound. And, to keep Aero Chamber mufflers from rusting from the inside out--a stainless steel perforated plate to eliminate internal rust. Muffler cases are available in 16-gauge aluminized steel or stainless steel but it's truly what's inside that makes it so sophisticated. Need a muffler? Go with Hooker Aero Chamber mufflers--the real master of flow!
( 128 )
$236.95
On Sale
Hooker Blackheart T-56 shift hump conversion floor panels are designed for swapping in a T-56 manual transmission. You can now make a clean and professional looking install with one of these tunnel/patch panels. They're made from 17-gauge steel and then EDP coated for superior corrosion resistance. The stamped steel design provides smooth edges and transitions (no seams to grind).
( 4 )
$105.95
$68.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
