Availability
Global West Suspension control arm shafts are machined from billet steel and are supplied with hardware for the shaft, but not for the frame. The shafts are zinc coated for corrosion protection. Some models are available with an offset to correct misalignment. Control arm shafts are available for a variety of applications from the 1960s, '70s, and '80s.
( 27 )
$71.40
—
$96.98
Global West Suspension Loc-Out kits replace the factory eccentric bolt and cam that holds the lower control arm to the frame. By replacing the eccentric bolt and cam with a plate system, you will have multiple alignment offsets. Global West Suspension manufactures these eccentric loc-out kits from quality materials to ensure performance and durability.
( 13 )
$59.97
—
$90.54
Global West Suspension tubular tie rod adjusting sleeves engage along the entire sleeve, giving the best holding ability and reducing any chance of slipping. Tubular sleeves are needed mainly when the hard cornering load on the steering linkage is high. These Global West Suspension tubular tie rod adjusting sleeves do not need any special tools to adjust them, and the provided jam nuts prevent rotating. They are available for many popular domestic applications.
( 27 )
$65.20
—
$72.75
These Global West Suspension brake line kits are made from durable braided stainless steel hose and are produced for many popular musclecars. Kits are available for both stock and aftermarket caliper combinations.
( 13 )
$76.19
—
$97.87
These Global West Del-a-lum shackle kits are designed to control lateral loads, as well as provide smooth up and down movement without binding. Each bushing can be lubricated and they do not require disassembly for proper lubrication. Internal rotating sleeves (cross-drilled) and a rifled housing transfer grease throughout the bushing. Separate thrust washers eliminate lateral bushing movement and are capable of controlling more than the vehicle's weight.
( 28 )
$83.89
Are you thinking about upgrading your suspension? These upper trailing arm bracket kits from Global West Suspension may just be the ticket! Add an additional upper arm to reduce the tendency of pulling the single upper arm off the frame. The higher horsepower engines and better tires make the addition of another upper arm for strength to the frame a necessity. Instructions are included on how to install these bracket kits.
( 1 )
$77.95
When your American muscle needs new tie rods, Global West Suspension has the answer. Worn or bad tie rods can lead to other suspension problems, and Global West tie rod ends are not just quality performance parts, but a solution to the problem. They're durable and greasable for reduced friction, and debris may be efficiently flushed out. Avoid major tire wear and erratic steering with new Global West tie rod ends, available for hundreds of classic vehicles from the 1960s and '70s.
( 2 )
$61.99
—
$109.99
If you have lowered your car and lost traction as a result, Global West Suspension has the fix to bring it back! These steel anti-squat brackets allow rear control arms to be adjusted lower for increased traction at the drag strip and improved street and race car performance coming out of turns. Now, you can bring back your instantaneous center that was lost when you lowered your car, with these steel rear anti-squat brackets by Global West Suspension.
( 5 )
$92.60
These high quality wander bars manufactured by Global West Suspensions will help stiffen and increase the handling of your vehicle's chassis. Global West Suspension produces these bars out of thick wall steel and the larger bolt holes make for an easier installation experience. Black powdercoated for years worth of performance.
( 2 )
$52.59
Global West Suspension pitman arms will help reduce that play in your steering. These stock replacements are available for specific power steering applications. Global West pitman arms have large diameter splines of 1 1/4 in.
Not Yet Reviewed
$59.99
Global West Suspension leaf spring conversion kits are an affordable way to convert your mono-leaf spring over to a multi-leaf application. Global West Suspension designed these kits without having to change the rear-end leaf spring mounts. Kits include the following items: * Installation hardware * Spacers * Polyurethane pads * Dowel and center pin for centering the rear-end in the car
( 4 )
$77.00
Idler arms offer support for your steering linkage, but they tend to wear out over time. Replace your old or worn-out idler arm with one of these from Global West Suspension.
Not Yet Reviewed
$62.99
If you've upgraded your suspension and tires, then you need to strengthen your suspension mounting points to guard against frame damage from increased loads. Replace your factory rear supports with Global West rear frame supports and beef up in between the upper frame crossmember and the lower arm's pivot point. Factory brackets have slotted holes that allow for movement; to get the most support, you need the precise fit of Global West's rear frame tubular supports. Yes, these rear frame braces are still adjustable, so you get a proper fit, but without the sloppiness of slotted holes. Global West rear frame supports are made of sturdy steel with a black powdercoated finish and rubber bushings for durability. Enjoy the added performance benefits of a more rigid chassis by adding rear frame supports from Global West Suspension--the people who manufacture solutions.
( 15 )
$85.18
Global West Suspension control arm alignment shim kits allow easy adjustment of caster/camber during front-end alignment. The quality shims come in three different thicknesses: 1/8 in., 1/16 in., and 1/32 in. (four of each size) in this kit.
Not Yet Reviewed
$72.99
Rack and pinion bushings move the steering rack upward reducing conflicting suspension angles between the control arm and steering components. These solid Global West Suspension rack and pinion bushings will improve driver feel and steering response. Global West Suspension manufacturers these bushings from quality materials to ensure performance and reliability. Available in standard suspension no offset and offset bushings for lowered applications.
( 3 )
$54.48
When putting together your suspension, you need the correct hardware. Global West Suspension control arm hardware kits are offered for a choice of applications. They are designed for use with your Global West control arms.
( 3 )
$51.10
Global West Suspension's panhard rods are engineered to keep the rear axle centered and aligned under severe cornering conditions. Global West Suspension manufactures these panhard rods from thick-wall 1.25 in. steel tubing, preventing flex and bending. They also feature durable polyurethane bushings and steel sleeves for added stability. They are available in an adjustable or a standard version. The adjustable panhard rod version allows for precise location of the axle in relation to the chassis and compensates for altered ride heights.
( 5 )
$82.28
Global West Suspension high-quality greasable outer tie rod ends are designed to complement tall spindle conversions. They include grease fittings, dust boots, and castle nuts.
Not Yet Reviewed
$65.08
—
$70.50
You've installed your panhard rod and it's not parallel to the ground. You need an adjustable bracket from Global West. These panhard rod relocation brackets install on the frame surrounding the stock mounting location and convert it to a multi-hole mount, allowing you to get the rod parallel to the ground, or as close as possible according to your ride height. Made from steel and powdercoated black, Global West relocation brackets include necessary hardware to complete the install for correct lateral rear-end location. Problem solved and performance gained by the people who manufacture solutions--Global West Suspension.
Not Yet Reviewed
$99.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
