Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FuelTech WB-O2 Sensors
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$99.00
—
$699.00
FuelTech IGN1A Inductive Smart Coils
FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.
( 2 )
$89.00
FuelTech EGT-4 CAN Conditioners
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$399.00
—
$1,348.00
FuelTech FT550 EFI System
FuelTech FT550 EFI systems were developed and created to put you in control! The FT550 ECU is an engine fuel control and monitoring system: electronic fuel injection, integrated dashboard, data acquisition, and power management system all-in-one! It uses the same FTManager software as the FT600, with the same features and functionalities--including the newest update that allows the user to update their fuel map by applying the oxygen closed loop corrections that took place from a log file. Map files of all the PowerFT ECUs are compatible with each other, meaning that you can upgrade ECUs and keep the same tune you had already. The dashboard design of the FT550 ECU systems feature an engine start button, new inclinometer gauges; and virtual LEDs for arrows, headlights and other functions. The touch screen allows editing the maps directly on the module (without the need for computer use) and seamless integration between the ECU and vehicle dashboard. More key features and benefits: * Sturdy, waterproof plastic case automotive connectors with 52 pins, USB communication and two CAN Bus ports, 14 inputs and 24 outputs that are fully configurable * Best ECU for projects that require more features, including GearController (power-shifts), built-in accelerometer (G-meter) and gyroscope; in addition to all PowerFT ECU line features such as sequential injection and ignition, O2 closed loop, active traction control, integrated BoostController, internal datalogger, progressive and PRO-Nitrous controls, odometers, electronic throttle control, inclinometer, drag racing features and more
Not Yet Reviewed
$1,699.00
FuelTech Relays
FuelTech offers high-quality sealed relays which are typically used for ECU, injectors, and coils when building your own harness. One relay is required per item being wired. Relays have a built-in 40 amp fuse. Electrical Connections: 85 - Trigger - FT auxiliary output (activated when switched to ground) 86 - Switched 12V 30 - Battery 12V 87 - Output for load - Normally open contact - 40A
Not Yet Reviewed
$14.00
FuelTech FT450/550 A Unterminated Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT450/550 A unterminated harnesses are offered in 10 ft. and 20 ft. lengths for FT450/550 A connectors. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
( 1 )
$139.00
—
$189.00
FuelTech NanoPRO Oxygen Sensor Conditioners
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$349.00
FuelTech SwitchPanel Mini
FuelTech's SwitchPanel Mini is a backlit keypad button panel that communicates with PowerFT ECUs via FTCAN 2.0. Their compact size allows the panels to be installed in any space, and the identification of each button is made through several predefined labels that come with the product--in addition to allowing you to create your own tab using the blank labels. In this way, each button will be very well identified, especially for the colored LED lighting that varies according to the programmed function. Make your build look even better with the FuelTech SwitchPanel Mini! Additional features and benefits: * SwitchPanel Mini keypad has configurable buttons with multicolor backlighting * Material construction: Silicone rubber with polyurethane hardcoat * Compatible with all features present in the PowerFT line ECUs * All buttons can be configured, such as 2-step, air conditioning, Boost +, engine start button, switch dashboard screen, etc. * Stores and saves inputs of the PowerFT ECUs and allows you to expand your build without having to use PowerFT ECUs with more inputs * Well-spaced buttons with a clear tactile perception works great even while wearing gloves * Switch type functions are also supported, such as the day/night mode button, Burnout, Progressive Nitrous, internal datalogger, etc. * IP67 protection rating against water and dust * Case features screws on the back to allow easy and discreet installation, and can be integrated into the dashboard for professional look * Includes SwitchPanel Mini with harness, mounting kit, label sheet, and operation and installation instructions
Not Yet Reviewed
$399.00
—
$409.00
FuelTech Exposed Tip Thermocouples
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$99.00
FuelTech Plug Kits
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$8.00
—
$159.00
FuelTech CDI Racing Ignition Coils
FuelTech CDI racing coils were developed to be used with the FuelTech FTSPARK on engines running individual coils and also rotary engines. The coils are designed to be used ONLY in conjunction with capacitive discharge ignitions (like a FTSPARK, for example). Using the coils with inductive ignition drivers will damage them. Do not use with FuelTech SparkPRO. Recommended spark plug wires: MSD Super Conductor, MSD-31193.
( 2 )
$79.00
FuelTech WB-O2 Nano Unterminated Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech WB-O2 Nano unterminated harnesses are ready to wire your wideband oxygen sensor display and conditioner. They are offered in 3 ft., 6.5 ft. (recommended size for most applications), and 15 ft. lengths. Easily install a Nano with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$69.00
—
$79.00
FuelTech FT550 B Unterminated Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech FT550 B unterminated harnesses are for upgrading from FT450. The B harnesses are offered in 10 ft. and 20 ft. lengths. Wire your project from scratch with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$139.00
—
$189.00
FuelTech FT450 EFI System
FuelTech FT450 EFI systems work with the ECU electronic injection system in a wide range of vehicles. They act as an engine monitoring and control system for your electronic fuel injection with their integrated instrument panel, data acquisition, and power management capabilities. Modify your injection setup for the performance you want with a FuelTech FT450 EFI system.
Not Yet Reviewed
$899.00
FuelTech Relay Connectors
FuelTech offers automotive relay holders for 4- or 5-pin mini ISO relays (regular 40 amp relays). They're the perfect relay connectors to use with the 40 amp relay with built-in fuse. Their crimp terminals are rated for high current and are the special spring pressure contact terminal to guarantee great contact even under vibration environment. Kit includes: * Housing with mounting flap to be mounted individually or can be interlocked * 3 of the high current crimp terminals to be used on pin 30, 87 and 87a compatible with wire 3.3mm2 to 5.3mm2 (12AWG to 10AWG) * 2 of the low current crimp terminals to be used on pins 85 and 86 compatible with wire 0.5mm2 to 0.8mm2 (20AWG to 18AWG)
Not Yet Reviewed
$25.00
FuelTech Hall Effect Converters
FuelTech hall effect converters are designed to read an analog VR signal and transform init to a digital signal (Hall). This is recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters. (Note: Not compatible with differential hall-effect or magneto-resistive sensors.)
Not Yet Reviewed
$99.00
FuelTech Temperature Sensors
FuelTech's temperature sensors are engineered to provide accurate, real-time data for high-performance automotive and racing applications. The benefits of the FuelTech's temperature sensors stem from their durability, precision, and seamless integration with FuelTech's engine management systems (ECUs). By monitoring the temperature of the intake air and fuel, the ECU can make fine-tuned adjustments to fuel delivery and ignition timing to ensure a consistent air-fuel mixture for maximum power and efficiency.
Not Yet Reviewed
$69.00
FuelTech CDI Racing Ignition Coil Brackets
FuelTech CDI racing ignition coil brackets will mount four FuelTech CDI racing ignition coils. Made from lightweight billet aluminum (only 13.1 oz.), the bracket kits include four 1/4 in. socket head cap screws to mount the coils to the bracket and four 1/4 in. threads in the back, front, and bottom for mounting to the chassis.
Not Yet Reviewed
$129.00
FuelTech Pressure Sensors
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$129.00
FuelTech SparkPRO Ignitions
FuelTech SparkPRO ignitions are available in versions from one to eight ignition outputs. They feature high-energy inductive ignition to be used with ignition coils without igniter (dumb coils). The modules deliver high voltage at the coil's primary, up to 430 V. Additional details: * Each SparkPRO channel can be connected to only one coil at a time * Compatible with any programmable ECU that has dwell control * Cannot be used with stock ECU * Dimensions: 115 x 90 x 33mm Kit contents: * One SparkPRO ignition * One operation and installation guide * One 6.5 ft. SparkPRO unterminated harness (optional) * One FuelTech black carbon fiber sticker
Not Yet Reviewed
$269.00
—
$439.00
FuelTech EGT-4 CAN Harnesses
FuelTech has released a variety of engine harnesses for popular engine combinations, boost control, and data-logging, including these terminated EGT-4 Can harnesses. From plug-and-play to unterminated—FuelTech has the correct harness to help complete your FuelTech ECU-equipped project.
Not Yet Reviewed
$29.00
FuelTech Air Temperature Sensors
FuelTech air temperature sensors are ideal for turbocharged, supercharged, or naturally aspirated engines to help prevent detonation and ensure accurate tuning for peak performance. These sensors provide precise intake air temperature readings, which allow the engine's control unit to make accurate adjustments to the fuel-air mixture and ignition timing for optimal engine performance, efficiency, and detonation prevention. The sensors are built to be accurate and durable, integrating seamlessly with FuelTech ECUs to ensure reliable data for tuning and real-time performance monitoring.
( 1 )
$29.00
FuelTech Remote Mount Pressure Sensor Blocks
FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)
( 1 )
$89.00
FuelTech LS550 V8 Complete Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech LS550 V8 complete harnesses are the best fit for a standalone LS swap utilizing the FuelTech FT550 or FT550LITE ECU and GM LS engine. These plug-and-play harnesses come pre-terminated to suit an LS engine with all relays and fuses for a simple 3-wire battery hookup and ignition power. They are ready for both 58x and 24x triggers with provision for direct connection to LS3-style ignition coils, GM-style flex fuel sensor, and dual wideband Nano connection. FuelTech's LS550 harnesses are set up for both cable and drive-by-wire based throttles, with the connector for a GM-style accelerator pedal on the cabin side of the harnesses. Each connector has its own label and the connectors and harness insulation are heat, moisture, and oil-resistant.
Not Yet Reviewed
$799.00
