Availability
Engine Works LS Series valves are offered in OE and Performance styles for intake and exhaust. Made from stainless steel, the Performance valves are swirl polished and have an undercut stem, and the OE intake valves are black nitrided. Choose the proper size intake or exhaust valves for your application.
( 3 )
$4.96
—
$9.61
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
—
$106.21
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
Not Yet Reviewed
$17.50
—
$44.96
Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible
( 1 )
$33.71
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.
Not Yet Reviewed
$31.24
—
$41.21
Engine Works offers timing covers in a variety of styles for many Chevy and Ford engine applications. The one- or two-piece covers are available in stamped steel or diecast aluminum—in multiple finishes. These replacements are essential in protecting the timing belt, timing chain, or cam belt of your vehicle from road debris, grime, and gravel. Order the model recommended for your ride.
Not Yet Reviewed
$7.50
—
$23.71
Get maximum power and performance out of your vehicle with Engine Works Performance Series pushrods. These Performance Series pushrods are engineered to withstand extreme speed conditions and will provide long-lasting dependability and exceptional value for the money. Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995. Whether you're a motorsports professional or street enthusiast seeking high-performance parts for your hot rod or racing application, Engine Works offers products that are what you need to take your ride to the next step. Performance Series pushrods features and details: * One-piece, center-ground, chrome-moly, SAE 4130 seamless pushrod * Case hardened to Rc60 and designed for use in hot street motors and/or oval track race cars, drag race, and marine applications * Made from premium materials for rock-solid strength and durability * Ball ends are machined to a tolerance of .001 in. * Pushrods are finished with a black oxide coating and laser etched with the length designation for easy identification * Provides ultimate blend of quality, dependability, and value * Great upgrade for your street or race car—engineered to help you unlock more power and performance
Not Yet Reviewed
$34.50
—
$79.50
Engine Works offers oil galley plugs for a variety of LS engine applications from 1997 and up. These nylon/plastic plugs help to maintain proper oil pressure. An O-ring seal is included.
Not Yet Reviewed
$4.86
Engine Works offers camshaft locking plates to keep your cam and timing gear locked securely together. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. Each plate is stamped from cold steel, features bendable tabs to lock the cam bolts in place and is finished in black oxide. Kit comes with zinc alloy 150,000 psi bolts to lock the cam plate into place after they're torqued to spec. Order the cam locking plate recommended for your make/model.
Not Yet Reviewed
$3.49
—
$28.71
Elevate your vehicle's performance with Engine Works Street Series intake valves. Designed to unlock maximum power and efficiency, these top-tier products ensure your vehicle operates at its peak potential. Engineered to thrive under high-speed conditions, this performance upgrade guarantees unparalleled durability and remarkable value for your investment. With Engine Works, you can tackle both the racetrack and everyday streets with unwavering confidence, indulging in a thrilling driving experience like never before.
Not Yet Reviewed
$7.46
—
$9.36
Elevate your vehicle's performance with Engine Works Street Series exhaust valves. Designed to unlock maximum power and efficiency, these top-tier products ensure your vehicle operates at its peak potential. Engineered to thrive under high-speed conditions, this performance upgrade guarantees unparalleled durability and remarkable value for your investment. With Engine Works, you can tackle both the racetrack and everyday streets with unwavering confidence, indulging in a thrilling driving experience like never before.
Not Yet Reviewed
$7.46
—
$10.61
Engine Works LS oil pan pressure relief valve plugs are typically used to delete the secondary pressure relief valve when the active fuel management (AFM) and/or the variable valve timing (VVT) has been deleted. The kit includes plug with crush washer.
Not Yet Reviewed
$8.71
Engine Works offers oil filter adapters for a wide range of applications, including many Chevrolet big block and small block engines from the 1950s and up. They're machined from aluminum and designed for spin-on filters.
Not Yet Reviewed
$15.49
Engine Works offers oil pump driveshafts for a variety of small block and big block Chevrolet engine applications from the 1950s and up. They're machined from superior grade steel alloy and heat-treated for high RPM usage. These OE replacements feature a pinned steel drive sleeve for extra safety. The driveshafts are available individually or in sets of 10.
Not Yet Reviewed
$13.24
Engine Works offers a comprehensive portfolio of high-quality, high-value, and high performance products for racers, engine builders, and everyday gearheads. These oil pan bolt kits are designed for a variety of Chevrolet small block engine applications from the 1950s and up. The steel hex head fasteners have a protective black coating to resist rust and corrosion.
Not Yet Reviewed
$9.96
Engine Works offers several valve cover breathers to meet your needs. These components are designed to allow for proper crankcase ventilation for more efficient filtering and air circulation. The breather filters feature a mesh fiber reinforced material that stands up to tough environments. Order the size and attachment style preferred for your application.
Not Yet Reviewed
$12.46
—
$13.11
Save time and money with Engine Works engine finishing kits. During an engine tear down and the cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Engine Works offers many of the hard-to-find OEM service parts you need in each engine hardware finishing kit. Available for small and big block Chevrolet and small block Ford engines, all hardware in each engine finishing kit is manufactured to precise OEM dimensions to make engine assembly easy.
Not Yet Reviewed
$38.71
Engine Works harmonic balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. These threaded harmonic balancer bolt fasteners ensure that the damper stays on tight. The bolts are available in several different lengths and are manufactured from premium materials for maximum strength and have a quality finish for good looks. Includes a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. Order the harmonic balancer bolts that are designed for your application needs.
Not Yet Reviewed
$8.24
—
$11.21
Engine Works offers oil restrictors for a variety of engine applications from the 1950s and up. Machined from aluminum, they fit in most small and big block Chevy blocks (except Bowtie) at the rear of the block. Simply replace the oil galley plugs (tapping may be required). These restrictors are not for use with hydraulic lifters. An oil restrictor installs in the oil passages of the engine block. It limits the flow of oil to certain parts of the engine. Engine oil lubricates and cools vital engine components. In most cases, more oil usually means the engine will run cooler and last longer. However, in some specific RACING applications, more oil can actually reduce the performance of the engine. When roller rockers and solid lifters are installed, the amount of oil required by the valvetrain is reduced greatly. Installing an oil restrictor kit will limit the oil flow, reducing the windage created from excess oil draining past the rotating assembly. This keeps the oil flowing where it is needed most—to the rod and main bearings.
Not Yet Reviewed
$13.71
Engine Works valve spring and retainer lock systems present a comprehensive solution for those looking for high quality and affordability. These valve spring and retainer lock systems are engineered to meet the demands of various cam types to ensure optimal performance and reliability. They feature premium valve springs, chrome-moly matched retainers, and precision-machined valve locks, all in one convenient package. The systems are available for a wide range of applications, including many Chevrolet small block V8 engines from 1955 and up.
Not Yet Reviewed
$116.21
Engine Works camshaft and lifter kits feature precision machined and hardened cams for street performance, drag racing, circle track, 4-wheeling, or towing matched with a set of lifters. Engine Works has many kits available covering a wide range of applications. Choose a set you prefer for your build.
Not Yet Reviewed
$212.46
Engine Works oil filter adapter bolts are used to fasten the oil filter adapter or oil bypass valve to the engine block. The bolts are available in several sizes and will provide the perfect fit and function just like the originals they are replacing. Order the oil filter adapter bolts designed for your application.
Not Yet Reviewed
$2.44
Engine Works Pro-Billet Series timing chains are engineered for unparalleled performance and durability. Featuring a pre-stretched double roller 1/4 in. chain, these timing chains offer stability even at high rpms. Surpassing OE designs in strength and accuracy, Engine Works timing chains boast a 9-keyway crank sprocket, heat-treated crank gears, and Torrington bearings for optimal functionality. Engine Works is a trusted name in delivering top-quality products at competitive prices. Check availability and order the one recommended for your vehicle.
Not Yet Reviewed
$113.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
