Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Works Performance Torque Converters
Engine Works Performance torque converters offer unmatched quality and durability with sprag-less technology. These Street and Strip converters are precision welded and include all-new hardened pump hubs and roller bearings, plus each unit is leak checked and computer balanced, ensuring performance. Engine Works torque converters are available in several diameters and types. Choose one designed for your transmission.
( 3 )
$274.96
—
$324.96
Engine Works SFI-Approved Flexplates
Engine Works offers SFI-approved flexplates for a wide range of applications from the 1950s and up. These steel replacements are available in one- or two-piece rear main seal styles, internal or external balanced. The flexplates are designed to factory specs to ensure proper fitment and exceptional performance.
( 6 )
$62.46
—
$84.31
Engine Works Deep Transmission Pans
Engine Works deep transmission pans offer multiple benefits for race and street use. In addition to more fluid capacity, aluminum dissipates heat, and is stronger than steel alternatives. Spacer bolts and hardware are included with each transmission pan model. Order the pan for your application needs.
( 3 )
$112.46
—
$137.46
Engine Works LS Main Cap Bolt Kits
Engine Works LS main cap bolt kits offer a complete set of bolts for one engine. Each kit includes outer main cap studs, inner main cap bolts, and side main cap bolts.
Not Yet Reviewed
$87.46
Engine Works Lightweight Fuel Pump Pushrods
Engine Works offers lightweight fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s and up. They feature a tubular design with one hardened steel end and one bronze end for use on all aftermarket camshafts. Aluminum rods with brass tips are also available. Select from models designed for use with cast iron or billet steel roller cams.
Not Yet Reviewed
$26.21
—
$29.96
Engine Works Lifters
Engine Works offers lifters for a variety of applications, including many Chevrolet big block and small block V8 engines from 1955 and up. The replacements are available in hydraulic roller or flat tappet styles. These components sit between the camshaft and the cylinder valves. As the camshaft moves over the top of the lifter, it actuates, temporarily opening the valve. And because the intake and exhaust valve need to open at different times, each has its own separate lifter. Order the set recommended for your engine.
( 2 )
$87.46
—
$199.63
Engine Works Alternators
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, Engine Works has got an alternator to help you accomplish your mission. These alternators feature a quality construction and are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run.
( 4 )
$149.96
—
$174.96
Engine Works Fuel Bowl Gaskets
Engine Works offers fuel bowl gaskets for a variety of carburetors, including Holley 4150, 4160, and 4500 models. The gaskets are made from blue non-stick reusable fiber. They're available individually or in multi-packs. Order the seals designed to fit your application.
( 3 )
$2.49
—
$15.32
Engine Works High-Tensile Strength Head Bolt Kits
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
( 1 )
$44.96
—
$62.46
Engine Works 51 Series Nylon Braided Hoses
Engine Works 51 Series nylon braided hoses are engineered to be dimensionally consistent for easier assembly with AN fittings. The hose is lightweight and features a high-grade nitrile core with an outer black covering and has a 350 psi max pressure rating. Hose is available in a variety of lengths and sizes, order the model for your application needs. Product details: * Lightweight hose engineered to be dimensionally consistent for easier assembly * For use with AN fittings * Suitable for fuel, lubricating oil, and coolant * Operating temperatures are from -40 degrees to +300 degrees F * 350 psi max pressure rating
Not Yet Reviewed
$33.11
—
$474.96
Engine Works LS Rear Main Seal Covers
Engine Works LS rear main seal covers include seal, gasket, and bolts. House and protect the rear main seal for leak-free performance with an Engine Works kit.
Not Yet Reviewed
$63.71
Engine Works LS Series Valves
Engine Works LS Series valves are offered in OE and Performance styles for intake and exhaust. Made from stainless steel, the Performance valves are swirl polished and have an undercut stem, and the OE intake valves are black nitrided. Choose the proper size intake or exhaust valves for your application.
( 5 )
$4.96
—
$11.86
Engine Works Camshaft Retainer Plates
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
( 1 )
$10.99
—
$21.86
Engine Works Timing Covers
Engine Works offers timing covers in a variety of styles for many Chevy and Ford engine applications. The one- or two-piece covers are available in stamped steel or diecast aluminum—in multiple finishes. These replacements are essential in protecting the timing belt, timing chain, or cam belt of your vehicle from road debris, grime, and gravel. Order the model recommended for your ride.
( 1 )
$14.96
—
$142.46
Engine Works 12-Point Head Stud Kits for GM LS
Engine Works 12-point head stud kits for GM LS engines are high-strength fasteners designed to replace stock headbolts, providing superior clamping force for high performance, boosted, or high-compression builds. Machined from 42CrMo or 8740 chromoly steel with 220K psi tensile strength, these components prevent head gasket leaks and head lift, featuring 12-point nuts for easier installation and improved torque accuracy. Order the kit recommended for your year/application. Key details: * Kits are available for various GM Gen III and IV LS-based engines, including 4.8L, 5.3L, 5.7L (LS1/LS6), 6.0L, and 6.2L engines * A full set usually includes 17 long studs, 5 medium, and 10 short studs, along with hardened parallel washers and 12-point nuts * Constructed from high-strength steel with a black oxide finish to resist corrosion, the hardware offers a 220,000 psi tensile strength rating * Ideal for upgrading from stock torque-to-yield bolts, these replacements increase clamping force, reducing the risk of cylinder head failure under high cylinder pressure * Installation: 12-point nuts allow for easier socket access in tight engine bays compared to standard hex nuts * These kits are often used for rebuilding LS engines in trucks (Silverado, Sierra), SUVs (Tahoe, Yukon), and performance cars (Camaro, Firebird, C5 Corvette) from 1997-2003 (Gen III) and 2004+ (Gen IV)
Not Yet Reviewed
$153.71
—
$178.71
Engine Works Billet Timing Pointers
Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible
( 1 )
$33.71
—
$61.21
Engine Works Stacked-Plate Remote Oil Coolers
Experience the pinnacle of automotive cooling technology with Engine Works stacked-plate remote oil coolers. Engineered for optimal performance enhancement, each assembly boasts aluminum AN fittings and hose-barb adapters for effortless installation. They feature a high-efficiency plate-and-fin heat exchanger core for superior cooling of either engines or transmissions, a universal mounting design, and integrated fan. This versatile solution is suitable for high performance vehicles and daily drivers alike.
Not Yet Reviewed
$287.46
Engine Works One-Man Brake Bleeder Kits
Engine Works "one-man" brake bleeder kits are designed to make the brake bleeding process easier and more convenient for solo mechanics. Unlike traditional methods that require one person to pump the brake pedal while another opens and closes the bleeder valve, these one-man kits eliminate this need. Most brake bleeder kits often feature a flexible silicone hose and a bottle that can be attached with magnetic holders to secure the reservoir and adapters to fit various vehicle types. The Engine Works one-man kits are designed to collect the brake fluid in a reservoir, minimizing spills, and help make cleanup easier after completion of the brake bleeding process.
( 2 )
$28.24
Engine Works Carburetor Overhaul Kits
Engine Works offers overhaul kits for a variety of carburetor models, including Holley 4160, 2300, and 4150. These kits contain all the gaskets and small parts needed to rebuild your carb. The gaskets are available in reusable and non-reusable options.
( 5 )
$33.71
—
$47.96
Engine Works Metering Block Gaskets
Engine Works offers many air/fuel carburetor gaskets to keep your carb performing at optimum levels. Their metering block gaskets feature blue non-stick fiber construction and are reusable. Available in different quantities for several carburetor applications, choose the style and quantity needed.
( 1 )
$2.49
—
$15.31
Engine Works Intake Gaskets Sets
Engine Works offers intake manifold gasket sets for a variety of applications, including many Ford small block V8s from the early 1960 and up. Constructed from premium fiber material blended with multiple elastomer layers, these replacement gaskets deliver a snug, fluid-resistant seal. Engine Works is synonymous with top-tier automotive solutions, catering to the needs of racers and engine builders alike. Order the gaskets designed to fit your vehicle.
Not Yet Reviewed
$16.21
—
$195.96
Engine Works Carburetor Floats
Get rid of those old fuel bowl floats—and upgrade to a carburetor float from Engine Works! These Nitrophyl carb floats are available for side hung or center hung fuel bowl models to keep your fuel level where it's supposed to be. Order the carb float model recommended for carburetor your application.
Not Yet Reviewed
$13.11
—
$21.21
Engine Works Racing Oil Pans
Engine Works racing oil pans not only create extra oil capacity, but also create horsepower by oil control. They feature kickouts and specially designed baffles to make sure oil stays in the pickup area, available for use. Some oil pans have crank scrapers that extract power-robbing windage from the rotating assembly. They are available painted or zinc plated for several applications. Select the racing oil pan that meets your needs.
( 1 )
$108.71
—
$124.96
Engine Works Claimer Series Pushrods
Engine Works offers Claimer Series pushrods for a wide range of Chevy, Ford, and GM LS applications from the 1950s and up. The .060 in. wall rods are machined from 1010 heat-treated steel with welded ball tips. Designed for street/strip use, these replacements are 30 percent stronger than OE and are guideplate compatible. They're available in a variety of diameters and lengths.
( 1 )
$35.96
—
$48.71
