Availability
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
Not Yet Reviewed
$44.96
Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible
( 1 )
$33.71
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.
Not Yet Reviewed
$31.24
—
$43.71
Engine Works offers timing covers in a variety of styles for many Chevy and Ford engine applications. The one- or two-piece covers are available in stamped steel or diecast aluminum—in multiple finishes. These replacements are essential in protecting the timing belt, timing chain, or cam belt of your vehicle from road debris, grime, and gravel. Order the model recommended for your ride.
Not Yet Reviewed
$23.71
Engine Works offers camshaft locking plates to keep your cam and timing gear locked securely together. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. Each plate is stamped from cold steel, features bendable tabs to lock the cam bolts in place and is finished in black oxide. Kit comes with zinc alloy 150,000 psi bolts to lock the cam plate into place after they're torqued to spec. Order the cam locking plate recommended for your make/model.
Not Yet Reviewed
$28.71
Engine Works rocker arm and stud girdle polylocks are manufactured from high-grade alloy steel, finished in black oxide, and feature cold-formed 12-point reduced heads for quick R and R. The bottom of each one incorporates a .550 in. step that centers the polylock on the trunnion of the rocker arm, and they are available in both 7/16 in. and 3/8 in. sizes. The stud girdle polylocks have a .950 in. long shank. Choose the size you need.
( 1 )
$42.46
Save time and money with Engine Works engine finishing kits. During an engine tear down and the cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Engine Works offers many of the hard-to-find OEM service parts you need in each engine hardware finishing kit. Available for small and big block Chevrolet and small block Ford engines, all hardware in each engine finishing kit is manufactured to precise OEM dimensions to make engine assembly easy.
Not Yet Reviewed
$38.71
Engine Works Sportsman Series timing sets are available in single- or double-roller options for Chevy, Ford, and Chrysler big block and small block engines. Order the replacement set recommended for your application. Details below: * Double roller models: -- .200 in. diameter double roller chain -- Cast iron cam sprocket -- 3-keyway crank sprocket with +/- 4 in. cam adjustment * Single roller models: -- Very large .334 in. diameter seamless single roller chain -- Cast iron cam sprocket -- 3-keyway crank sprocket with a +/- cam adjustment -- Heat-treated crank sprocket with black oxide coating
( 1 )
$34.50
—
$49.96
Engine Works offers guideplates for a wide range of applications, including many Chevy and Ford engine applications from the 1950s and up. These replacements are pressed from heat-treated steel and finished in a black oxide coating. They're available in flat or raised style, in 5/16 or 3/8 in. diameter.
Not Yet Reviewed
$20.31
Clearance
Get maximum power and performance out of your vehicle with Engine Works Performance Series pushrods. These Performance Series pushrods are engineered to withstand extreme speed conditions and will provide long-lasting dependability and exceptional value for the money. Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995. Whether you're a motorsports professional or street enthusiast seeking high-performance parts for your hot rod or racing application, Engine Works offers products that are what you need to take your ride to the next step. Performance Series pushrods features and details: * One-piece, center-ground, chrome-moly, SAE 4130 seamless pushrod * Case hardened to Rc60 and designed for use in hot street motors and/or oval track race cars, drag race, and marine applications * Made from premium materials for rock-solid strength and durability * Ball ends are machined to a tolerance of .001 in. * Pushrods are finished with a black oxide coating and laser etched with the length designation for easy identification * Provides ultimate blend of quality, dependability, and value * Great upgrade for your street or race car—engineered to help you unlock more power and performance
Not Yet Reviewed
$69.96
$34.50
Engine Works offers Claimer Series pushrods for a wide range of Chevy, Ford, and GM LS applications from the 1950s and up. The .060 in. wall rods are machined from 1010 heat-treated steel with welded ball tips. Designed for street/strip use, these replacements are 30 percent stronger than OE and are guideplate compatible. They're available in a variety of diameters and lengths.
Not Yet Reviewed
$33.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
