Availability
C.E. Smith heavy-duty side mount spare tire carriers are perfect for mounting your spare tire vertically to the side of trailer tongue or frame rails. These sturdy spare tire carriers mount to the trailer tongue in the front of the trailer. The offset design moves the tire and wheel up and away from the trailer frame to improve ground clearance. No drilling is required to install the carrier because the included U-bolts clamp the carrier to the trailer frame. The crisscross design increases the holding power of the U-bolts. Mounting U-bolts may be crossed to fit shorter frames or may be installed parallel for more reach. Additional details: * 3/16 in. thick galvanized steel * Fits frames up to 4 in. tall by 1 in. up to 3 1/2 in. wide * Holds either 4- or 5-lug wheels that are up to 15 in. * Not compatible with 5-on-5 in. or 5-on-5 1/2 in. bolt pattern * Extra heavy-duty welded steel construction for worry-free trailering * Offset height raises tire and provides additional ground clearance * Vertical offset: 5 in. * Side offset: 4 1/2 in. * Comes complete with all zinc plated hardware
( 1 )
$40.79
Clearance
Guide-Ons are a great way to add and improve visibility when loading and unloading your boat. These guide-on post extensions pair nicely with C.E. Smith bunk board guide-ons, coupling the centering support and the added visuals to make trailering easy. Product details: * 4 adjustable height settings 39.5 in., 37.5 in., 35.5 in., and 33.5 in. (as measured from the top mounting bolt hole center to the top of the PVC cap) * 1 1/4 om/ pre-galvanized steel tubing * 1 14/16 in. O.D. white PVC tube * Works with C.E. Smith 2 ft. bunk board guide-ons and the C.E. Smith 5 ft. bunk board guide-ons * Can be used with other bunk board guides with 1 1/2 in. tubing * Includes all needed hardware to mount with existing C.E. Smith bunk board guide-ons * Sold in pairs * Bunk board guide-ons sold separately * Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).
Not Yet Reviewed
$88.99
$44.50
C.E. Smith's tough waterproof, shock-proof LED guide-on post lamps make it easy to see your trailer's position when backing down the ramp—and dramatically increase your trailer's visibility over the road at night. These lights are easily installed; they screw onto the top of your guideposts and wire into your trailer's taillights. The LEDs are long-lasting, energy efficient, and more durable than incandescent lights. Additional product details: * One-piece lamps fit easily on top of your existing 2 in. PVC post guide-ons * Amber light faces front, red faces rear. (When not energized, lamps appear clear) * Includes two sealed one-piece LED lamps, each with 8 ft. of wire and all necessary electrical connectors and mounting hardware
Not Yet Reviewed
$35.99
C.E. Smith trailer U-bolts are designed for mounting brackets and accessories to trailer frames. The zinc plated square-bend bolts are machined from Grade 5 steel and are available in a variety of lengths. They come packaged with nuts and washers to facilitate an easy, secure installation.
Not Yet Reviewed
$22.99
—
$26.99
Why are wheel bearing protectors needed? : Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled, which contracts any air inside the hub—creating a vacuum. The vacuum pulls water and road grit inside the hub, contaminating the grease. This contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season. C.E. Smith wheel bearing protectors correct this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the bearing protector pressure relief feature. Once the hub is full, the spring-loaded piston in the bearing protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside. Additional details: * An automatic pressure relief feature prevents over-filling the hub which would damage seals * Chrome plated steel or stainless steel protectors with bra * Available for a variety of hub bore diameters * Sold in pairs
Not Yet Reviewed
$24.99
—
$41.99
C.E. Smith knife and plier racks keep your tools and fishing equipment safely organized. The tough one-piece molded polypropylene design holds a needle-nose plier, two knives, and has 15 tackle hanging holes. Additional product details: * Includes stainless mounting screws * Corrosion-proof * UV-resistant * 9 in. tall x 4 in. wide x 2 1/4 in. deep
Not Yet Reviewed
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
