Availability
C.E. Smith offers bunk board guide-ons for marine trailers in a variety of options. Here's a capsule look at each model with the specs and options: * Model 27671: Ideal for bunk-style pontoon boat trailer with box, channel, or I-beam frames up to 3 in. wide x 4 1/4 in. tall. Pontoon glides easily past the carpeted bunk boards, guiding the pontoon boat onto the trailer. Height is adjustable and is set during install between 24 in. and 36 in. above trailer frame. Mount with bunks 2-3 in. from pontoons on a trailer frame cross member. -- Fits frames up to 3 in. wide x 4 1/4 in. tall -- U-bolt mounting brackets -- Includes two 24 in. carpeted bunk boards -- Galvanized steel construction -- Zinc plated hardware * Model 27600: Carpeted bunk boards provide proper center loading even in wind or side current conditions. -- 1 1/2 in. square pre-galvanized uprights, angled out at 75 degrees -- 2 in. x 4 in. x 24 in. boards tilt to hug the hull and are covered with high grade marine carpet -- Boards are untreated Southern yellow pine -- Height of 21 in. with adjustment out to 13 in. from frame on each side -- Can be mounted on top of frame for extra height -- Complete with mounting hardware to fit frames up to 3 in. wide x 4 1/4 in. high * Model 27660: Carpeted bunk boards provide proper center loading even in wind or side current conditions. Adjustable boat guides can be fine-tuned to work with your boat and your trailer. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull. Guides will help to center your boat during loading and to hold the boat during transport. -- 1 1/2 in. square pre-galvanized uprights, angled out at 75 degrees -- 2 in. x 4 in. x 60 in. boards tilt to hug the hull and are covered with high-grade marine carpet -- Boards are untreated Southern yellow pine -- Height of 21 in. with adjustment out to 13 in. from frame on each side -- Can be mounted on top of frame for extra height -- Complete with mounting hardware to fit frames up to 3 in. wide x 4 1/4 in. high
( 2 )
$99.99
—
$191.99
C.E. Smith trailer post guide-ons provide clear visual markers to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage—even when the trailer is under water. Unlike plastic guide-ons that fall apart or break with minimal impact, these square 16-gauge steel uprights are pre-galvanized for corrosion resistance, with a black or white PVC coating and caps to remain sturdy season after season. The posts are available in multiple lengths and widths, as well as side-to-side adjustment measurements. Mounting hardware is included.
Not Yet Reviewed
$95.99
—
$138.99
C.E. Smith axle tie plate kits have everything you need to mount fresh springs to a fresh axle. The steel hardware is zinc plated to resist rust and corrosion. Kit 23102 is designed for a 1 1/2 in. square axle. It includes: * 2 galvanized tie plates -- 3.5 in. x 3 in. -- Smith P/N 20022G * 4 yellow zinc plated U-bolts -- 3/8 in.-16 x 2 in. (1 5/8 in. inner) x 3 3/8 in. -- Smith P/N 22003ZY * 8 zinc plated nuts and lock washers -- 3/8 in.-16
Not Yet Reviewed
$16.99
C.E. Smith roller trailer guide-on kits (with end caps) are designed to assist in centering your boat onto the trailer, making for a smooth and efficient loading process. The guide-ons are ideal for retrieving your boat on shallow ramps where the trailer is not far into the water—or when you have a crosswind or current pushing the boat. The uprights are made from 1 1/2 in. pre-galvanized steel, which adds to the guide-ons' durability and allows them to lean outward 15 degrees to cradle the boat. The guide-ons come fully assembled and ready for installation, making them an efficient replacement part for your existing boat trailer. The mounting brackets are adjustable, allowing for up to 13 degrees of adjustment on frames up to 3 in. wide x 4 1/4 in. high. This makes them suitable for a wide range of boat trailers. The guide-ons are 21 in. tall above the frame with 9 in. rollers at the top and bottom and 2 in. roller caps at top and bottom, which provides added support during transport.
Not Yet Reviewed
$122.99
C.E. Smith offers zinc plated steel trailer wiring frame clips. All trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame as frequently as you want. With a pack or two of the versatile clips, you can secure your drooping trailer wiring. They measure 3/8 in. wide with grip edges up to 5/32 in. thick.
Not Yet Reviewed
$5.99
The C.E. Smith pontoon bunk board guide-on kit is an essential boating accessory for boat trailers. This guide-on is designed to make loading and unloading your pontoon boat onto your trailer a breeze. Galvanized steel construction ensures it can withstand harsh marine elements and provide long-lasting use, while the zinc-plated hardware adds an extra layer of rust protection. It features U-bolt mounting brackets that provide a secure fit for frames up to 3 in. wide x 4 1/4 in. tall for easy installation. The included two rubber roller bunks provide minimum friction rolling action, which allows you to easily guide your pontoon boat onto the trailer. The bunks also reduce wear and tear, which helps prolong your boat's life. The guide-on is the optimal height for bunk-style pontoon boat trailers with box, channel or L-beam frames. The guide-on is designed to be mounted with roller bunks 2-3 in. from the pontoons on a trailer from the crossmember.
Not Yet Reviewed
$114.99
Update worn bearings for smoother operation of your trailer wheels. C.E. Smith offers replacement wheel bearings for trailers with different sized spindles. Each set outfits one wheel—and includes an outer and inner bearing set, two races, grease seal. and cotter pin.
Not Yet Reviewed
$16.99
—
$17.99
C.E. Smith trailer U-bolts are designed for mounting brackets and accessories to trailer frames. The zinc plated square-bend bolts are machined from Grade 5 steel and are available in a variety of lengths. They come packaged with nuts and washers to facilitate an easy, secure installation.
Not Yet Reviewed
$7.99
—
$26.99
C.E. Smith heavy-duty side mount spare tire carriers are perfect for mounting your spare tire vertically to the side of trailer tongue or frame rails. These sturdy spare tire carriers mount to the trailer tongue in the front of the trailer. The offset design moves the tire and wheel up and away from the trailer frame to improve ground clearance. No drilling is required to install the carrier because the included U-bolts clamp the carrier to the trailer frame. The crisscross design increases the holding power of the U-bolts. Mounting U-bolts may be crossed to fit shorter frames or may be installed parallel for more reach. Additional details: * 3/16 in. thick galvanized steel * Fits frames up to 4 in. tall by 1 in. up to 3 1/2 in. wide * Holds either 4- or 5-lug wheels that are up to 15 in. * Not compatible with 5-on-5 in. or 5-on-5 1/2 in. bolt pattern * Extra heavy-duty welded steel construction for worry-free trailering * Offset height raises tire and provides additional ground clearance * Vertical offset: 5 in. * Side offset: 4 1/2 in. * Comes complete with all zinc plated hardware
( 1 )
$40.79
Upgrade the appearance of your trailer with an aluminum tread plate license plate bracket from C.E. Smith. They fit standard left side DOT brake/tail lamps. No mounting hardware is required; each bracket installs between the existing taillight mounting bracket and the left side taillight via the lamp's two mounting studs.
Not Yet Reviewed
$10.99
Black natural rubber bow Y-stops are original equipment on many trailers. C.E. Smith offers replacement Y-stops in multiple sizes. Choose from a 4 in. span with 2 in. x 2 in. mount and 3/8 in. bolt; or a 6 5/8 in. span with 3 in. x 3 in. mount and 1/2 in. bolt. These rubber "bumpers" cradle the front of your boat for a secure hold.
Not Yet Reviewed
$8.99
—
$17.99
C.E. Smith offers spare tire carriers for trailer applications. Their strong 7/16 in. Steel rod construction fits on frame, tongue, or rails up to 3 in. wide. The 3 inches of threads fit a wide range of frame thicknesses and wheel sizes. These zinc plated spare carriers will hold 4 -or 5-lug wheels—and fit 8 in. through 14 in. wheels and most 15 in. wheels.
Not Yet Reviewed
$10.99
Guide-Ons are a great way to add and improve visibility when loading and unloading your boat. These guide-on post extensions pair nicely with C.E. Smith bunk board guide-ons, coupling the centering support and the added visuals to make trailering easy. Product details: * 4 adjustable height settings 39.5 in., 37.5 in., 35.5 in., and 33.5 in. (as measured from the top mounting bolt hole center to the top of the PVC cap) * 1 1/4 om/ pre-galvanized steel tubing * 1 14/16 in. O.D. white PVC tube * Works with C.E. Smith 2 ft. bunk board guide-ons and the C.E. Smith 5 ft. bunk board guide-ons * Can be used with other bunk board guides with 1 1/2 in. tubing * Includes all needed hardware to mount with existing C.E. Smith bunk board guide-ons * Sold in pairs * Bunk board guide-ons sold separately * Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).
Not Yet Reviewed
$88.99
C.E. Smith offers marine trailer post guide-ons in a variety of styles and options. Here's a capsule look at each model: * Model 27760: These post guide-ons allow you to see the location of your trailer when it's under water. They're equipped with long-lasting, waterproof and shockproof, one-piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp—and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. -- Mounting hardware and wiring included. -- Sold in pairs -- Adjusts out to 19 in. each side -- Fits frames up to 3 in. W x 4 1/4 in. H -- 1 1/2 in. square, 16-gauge pre-galvanized steel uprights -- 39 in. high -- 2 3/8 in. diameter white PVC posts -- Stands 60 in. above the trailer frame * Model 27670: Loading your pontoon boat onto your trailer is much easier with post guide-ons. These guide-ons mount on top of rear crossmember and fit in-between the pontoons to center your boat on the trailer. -- Mounting hardware included -- 1 1/2 in. square 16-gauge pre-galvanized steel uprights -- 2 3/8 in. diameter white PVC posts -- Fit up to 3 in. W x 4 1/4 in. H frames -- 22 in. high
Not Yet Reviewed
$93.99
—
$184.99
Black natural rubber rollers are original equipment on many trailers, helping to steady and secure watercraft for transport. C.E. Smith offers replacement trailer rollers in a variety of styles (bow, keel, roller spool), lengths, and mounting hole sizes. The rollers fit standard brackets and shaft sizes.
Not Yet Reviewed
$32.99
—
$65.99
C.E. Smith offers fishing rod mounts and holders for your watercraft in multiple styles. They're made from stainless steel with a protective silver finish. Here are details on two styles: * Flush mount (part number 53672A): They feature a wide low-profile cap for excellent mounting strength and to enhance the appearance of any boat. The 100 percent welded cap-to-tube joint will never break. The super tough 1/4 in. wide x 1/2 in. tall welded cast gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. A white vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. -- Made from 316L stainless steel -- 1 5/8 in. inner diameter -- 2 in. outer diameter -- 9 in. tube -- Cap: 4 1/2 in. long x 3 5/8 in. wide * Vertical mount (part number 55108A): Clamp is made for the square rails found on pontoon boats. Each rod holder comes with two protective liners, one to fit 1 in. and one to fit 1 1/4 in. square rail. The liners are round on the outside, allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. -- Made from 304 stainless steel tube lined with UV-resistant black PVC and fitted with a chrome zinc alloy adjustable clamp -- Angle around the rail is infinitely adjustable -- Angle to the left or right adjusts in 15 degree increments -- Plastic insulator sleeves are included to help provide snug fit on the rail -- 9 in. tall tube with 1 5/8 in. I.D. -- Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place -- Gimbal pin keeps your rod from spinning -- Solid bottom with drain holes prevents water from pooling -- A great option for freshwater use!
Not Yet Reviewed
$76.99
—
$109.99
C.E. Smith bearing dust caps are designed to protect your axle nuts. They're machined from steel with a protective silver powdercoat. Sold in pairs, the caps fit hubs with an inner diameter of 1.980 in.
Not Yet Reviewed
$7.99
Why are wheel bearing protectors needed? : Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled, which contracts any air inside the hub—creating a vacuum. The vacuum pulls water and road grit inside the hub, contaminating the grease. This contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season. C.E. Smith wheel bearing protectors correct this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the bearing protector pressure relief feature. Once the hub is full, the spring-loaded piston in the bearing protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside. Additional details: * An automatic pressure relief feature prevents over-filling the hub which would damage seals * Chrome plated steel or stainless steel protectors with bra * Available for a variety of hub bore diameters * Sold in pairs
Not Yet Reviewed
$16.99
—
$41.99
C.E. Smith offer trailer bunk board brackets in a variety of sizes; some models are adjustable. The hot-dip galvanized steel swivel brackets will stand up to the harshest marine environments. Order the length and other options best suited for your trailer and watercraft application.
Not Yet Reviewed
$3.99
—
$13.99
C.E. Smith offers replacement spindle nuts for 1 in. axle shafts. These kits include: * Two 1 in. shaft spindle nuts * Two 1 in. shaft washers * Two 1 3/4 in. long cotter pins Additional Specifications: Spindle nut has an outer diameter of 1 3/8 in. (35mm) and an inner diameter of 7/8 in. (22mm)
Not Yet Reviewed
$8.99
C.E. Smith trailer hubs come fully assembled with pre-greased bearings—which cuts down on the mess and makes final installation onto the axle much easier. Each hub kit includes carry case, dust cap, cotter pin, and lug nuts. Additional details: * 5 stud x 4.5 in. bolt circle diameter * 1 3/8 in. tapered to 1 1/16 in. shaft * 1,750 lb. capacity * 6 1/2 in. wheel flange diameter * 15 in. maximum wheel size * 1.98 in. hub inner diameter
Not Yet Reviewed
$73.99
C.E. Smith pontoon wing brackets support bunk boards in a shallow V-cradle configuration that best suits pontoon hulls. These V-wing bolsters are designed with a 7 in. lateral adjustment slot for perfect pontoon-to-trailer alignment. Additional details: * 1/8 in. thick steel * Hot dip galvanized for durability * Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat * A bracket should be installed at each frame crossmember for maximum support and load capacity
Not Yet Reviewed
$16.99
C.E. Smith's tough waterproof, shock-proof LED guide-on post lamps make it easy to see your trailer's position when backing down the ramp—and dramatically increase your trailer's visibility over the road at night. These lights are easily installed; they screw onto the top of your guideposts and wire into your trailer's taillights. The LEDs are long-lasting, energy efficient, and more durable than incandescent lights. Additional product details: * One-piece lamps fit easily on top of your existing 2 in. PVC post guide-ons * Amber light faces front, red faces rear. (When not energized, lamps appear clear) * Includes two sealed one-piece LED lamps, each with 8 ft. of wire and all necessary electrical connectors and mounting hardware
Not Yet Reviewed
$35.99
C.E. Smith T-top storage bags are ideal for packing life vests and other boating essentials. They feature safe hook-and-loop closure for instant emergency access to life jackets. The mesh top allows wet gear to dry. Additional product details: * 2 mesh side storage pockets, 1 mesh bottom storage pocket, and 1 large dry zippered pouch to store phones, wallets, glasses and other valuables * Heavy-duty marine grade corrosion-resistant zipper * Mounts under a T-top with four 2 in. wide adjustable snap buckle straps * Strong 600 denier polyester construction * 25 in. wide x 20 in. deep x 6 in. high * Main compartment holds 4 standard sized life jackets or other boating gear
Not Yet Reviewed
$94.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
