Availability
Mate your camshaft to a set of BTR Delphi LS7 hydraulic roller lifters. These full sets of lifters, also known as LS7 lifters, will also work in SBC and LT1 applications that originally came with hydraulic roller lifters. Choose your set today!
( 16 )
$209.99
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 13 )
$389.99
—
$499.99
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 14 )
$239.99
—
$599.99
BTR V2 rocker arm trunnion upgrade kits are designed for LS truck-style rocker applications and feature trunnions with pre-installed inner race bearings. They're upgraded from the V1 models with a pressed inner race comprised of 52100 heat-treated bearing steel (over the more commonly used 8620 carburized steel). Additionally, these sets feature a self-oiling axle with priority feeding to the trunnion itself.
( 13 )
$159.99
—
$179.99
BTR rocker arm trunnion upgrade kits improve your stock LS Series rocker arms with captured needle-style roller bearings. They'll provide more stability for your modified application. BTR upgrade kits include rocker arm bearings, trunnions, snap rings, and assembly washers. Replace weak stock LS components with BTR rocker arm trunnion upgrades to support your added power. Order the kit recommended for your year/make and engine application.
( 67 )
$1.99
—
$129.99
Brian Tooley Racing carries a wide variety of options for your LS or LT engine, including this set of lifter guides. BTR lifter guides are designed to accommodate four valve lifters each for either your LS or LT engine to give your roller lifters the proper orientation. These sturdy replacement lifter trays will register your lifters to prevent rotation, keeping them where they belong.
( 2 )
$29.99
BTR connecting rods are state-of-the-art 4340 H-beam rods for your build. They feature heat-treated, stress relieved, and shot peened bodies with bronze bushed pin bores, and the cap and rod are serialized at the parting line to ensure proper mating after disassembly. BTR inspects them for bearing housing and pin bore diameter, bend/twist, and C/L length. Additional features and benefits: * They are pre-torqued with high-pressure lube and ARP 2000 bolts * Sets of 8 are matched within 2 grams overall * The rods weigh in at approximately 665 grams * Laser marked on the beam with the BTR logo * Rods are individually bagged and sealed
( 2 )
$759.99
BTR introduces their new Beehive style valve spring kits that provides a great option for camshafts using less than .625 in. valve lift. These budget friendly valve spring kits were designed to use BTR's Beehive locator, and factory retainers and locks. Features include tumble polishing for reduced stress risers and a quality appearance. These BTR valve spring kits work for a wide range of applications, whether you're looking for longevity in street applications, or for use in single valve spring only limited racing classes, BTR has you covered. As with all BTR valve springs, they have been extensively tested on their in-house Spintron machine and engine dyno.
Not Yet Reviewed
$199.99
BTR connecting rod bolts are stock replacements for Gen III and Gen IV LS engines. An important connection in your rotating assembly, your rods need the correct fasteners to hold them together. You can be confident that the fit and strength of BTR connecting rod bolts will do the job.
( 3 )
$2.99
BTR V2 Series camshafts are designed for excellent performance and drivability. The V2 is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment. The maximum heat treatment depth is achieved by using cam cores made within a few thousandths of final grind size. Numerous grinds for turbo, supercharged, and naturally aspirated engines are available for your project—all backed by years of experience, knowledge, and a passion for power. BTR V2 Series camshaft features include: * Revised camshaft center lines for increased average torque * Engine dyno verified to produce more power * Each "stage" has a specific cam core * Maximum heat treatment penetration
( 3 )
$389.99
—
$409.99
Performance-minded engine builders know there's an inherent issue with valvetrain deflection when using stock rocker arm mounting in Chevrolet Gen III-IV-cylinder heads. BTR LS shaft rocker kits are designed to significantly reduce deflection, thereby improving both performance and durability. Each kit features technology typically only found in high-end shaft rocker systems. These shaft rocker systems consist of a billet steel stand equipped with four shafts per cylinder head, fasteners and bearings. The shafts are made from genuine 52100 bearing steel. Each pair of rockers has five fasteners mounting them to the rocker stand, compared to the traditional single bolt per rocker configuration. These shaft rocker kits are ready for assembly using your existing stock rockers. (Rocker arm shafts are also available individually.)
( 12 )
$8.99
—
$469.99
BTR valve covers retain stock mounting height and allow the use of OE-style GM gaskets and bolts, while being molded in a unique plane to allow nose clearance for shaft rockers. With -12AN ORB vents on both ends, you have a wide variety of options for catch can or vacuum pump plumbing. Also featured is a unique baffle design/splash guard that protrudes below the valve cover surface. Brian Tooley Racing are cast from aluminum and available in 3 colors--silver, black, or red--with and without coil mounts. BTR kits include: * Four baffles and baffle screws * One -12 fill cap and one -12 port plug
( 3 )
$279.99
—
$299.99
BTR camshaft retainer plates are designed to fit behind the front cover and support greater cam loads for Gen III/Gen IV LS-based engines. They act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. A specially designed gray O-ring seal keeps your oil sealed in. When modifying your valvetrain for better performance—don't forget BTR camshaft retainer plates!
( 7 )
$19.99
BTR timing sprockets deliver strength and accuracy for many miles of dependable service. These sprockets are made from high-quality materials and are a vital link for engine timing. Keep your engine in sync with an assist from the BTR timing sprocket designed for your application.
( 2 )
$25.99
—
$29.99
BTR rocker arm bolts are rough and tough. They provide the correct fit and performance, matching that of the originals. Featuring steel construction, precise threads, and a black oxide coating, BTR's bolts are available individually and in sets for many applications.
( 4 )
$2.99
—
$44.99
No more broken rockers! BTR rocker arms are designed to provide superior movement of inertia, compared to roller tip rockers, for max RPM. Their all-new 1.7 ratio drop-in design is perfect for cathedral port and square port (exhaust only), but will also work on the exhaust side of the L92/LS3 head. Constructed of bare steel, these BTR rocker arms are 46 percent stronger than stock Chevrolet rockers in FEA analysis--and feature an extended tip design that will allow for higher valve lift and improved valve tip durability.
( 4 )
$9.99
BTR conical valve springs are designed to maintain contact between your valvetrain components, so the valve motion will follow the cam profile. Each replacement spring is manufactured to exact specifications, as listed, for precise fitment. Conical valve springs from Brian Tooley Racing are a great choice for your application—trusted by engine builders worldwide!
Not Yet Reviewed
$249.99
—
$279.99
BTR oil galley barbell plugs are quality replacements for your LS engine. These oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. You don't want to overlook the little things for an enduring repair or build, so don't forget to order a BTR oil galley barbell plug.
( 3 )
$10.99
BTR camshaft bolt kits will easily end your camshaft timing worries. These fasteners offer easy installation and removal with their reduced head size. If you're installing a new cam or simply upgrading the hardware, order the BTR camshaft bolts recommended for your year/make and engine application.
( 8 )
$2.99
—
$7.99
BTR head bolts fasten your cylinder heads with high-quality steel. These Brian Tooley LS kits include enough bolts for one cylinder head. They're available for applications from 1997 and up.
Not Yet Reviewed
$39.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$7.99
—
$44.99
BTR VVT Phaser Limiters enable you to either limit or completely eliminate the VVT function on your Gen IV LS engine or Gen V LT engine. The Comp Cams phaser tool (purchased separately) is required to disassemble your cam sprocket and install the limiter or lockout.
Not Yet Reviewed
$19.99
—
$24.99
Brian Tooley Racing offers Johnson Lifters LS slow leakdown link bar lifter sets for a variety of Chevy small block applications from 1997 and up. They feature cold forged steel bodies heat treated for exceptional wear resistance—and precision-ground needle roller bearings with high chromium steel axles for long life and minimal friction. Additional product details: * Cold forged extra-long piston, precision-ground and fitted for controlled leak down and pump up * High-flow disc-style quick reacting check valve for better reaction at higher RPM * Precision oil metering, assuring proper oiling to the rocker arms without sacrificing oil pressure * Proprietary tie-bar system * All hydraulic lifters are available with short travel, variable duration lift, and axle oiling features
Not Yet Reviewed
$848.68
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
