Availability
On Sale
BTR connecting rod bolts are stock replacements for Gen III and Gen IV LS engines. An important connection in your rotating assembly, your rods need the correct fasteners to hold them together. You can be confident that the fit and strength of BTR connecting rod bolts will do the job.
( 4 )
$2.99
$2.69
On Sale
No more broken rockers! BTR rocker arms are designed to provide superior movement of inertia, compared to roller tip rockers, for max RPM. Their all-new 1.7 ratio drop-in design is perfect for cathedral port and square port (exhaust only), but will also work on the exhaust side of the L92/LS3 head. Constructed of bare steel, these BTR rocker arms are 46 percent stronger than stock Chevrolet rockers in FEA analysis--and feature an extended tip design that will allow for higher valve lift and improved valve tip durability.
( 2 )
$9.99
$8.99
On Sale
BTR camshaft bolt kits will easily end your camshaft timing worries. These fasteners offer easy installation and removal with their reduced head size. If you're installing a new cam or simply upgrading the hardware, order the BTR camshaft bolts recommended for your year/make and engine application.
( 9 )
$2.99
—
$11.89
$2.69
—
$10.70
On Sale
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
$4.49
On Sale
BTR offers Equalizer/Trinity throttle body gaskets for a variety of applications, including many Chevy small block engines from 1997 and up. These replacements are made from factory materials and specs to ensure proper fitment and seal performance. Their primary purpose is to create an airtight seal between the throttle body and the intake manifold, preventing air leaks so that incoming air is properly regulated by the throttle body. This maintains the correct air/fuel mixture for optimal engine performance.
Not Yet Reviewed
$9.99
$8.99
On Sale
BTR oil galley barbell plugs are quality replacements for your LS engine. These oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. You don't want to overlook the little things for an enduring repair or build, so don't forget to order a BTR oil galley barbell plug.
( 3 )
$6.99
$6.29
On Sale
Brian Tooley Racing offers stock replacement cylinder head dowel pins for Gen III and Gen IV LS engines. These replacements are machined from factory materials and specs to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$1.99
$1.79
On Sale
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$6.49
—
$7.99
$5.84
—
$7.59
On Sale
BTR valve locks are available in a variety of heights, angles, and designs to fit various LS valvetrain designs, as well as Ford Mod Motor applications. Available in pairs or sets, choose the correct size and quantity needed for your valvetrain.
( 2 )
$7.99
$7.19
On Sale
Brian Tooley Racing offers main cap fasteners for a variety of Chevy small block engine applications from 1997 and up. These bolts are used to secure the main bearing caps to ensure proper operation of the crankshaft. The fasteners are stock replacement bolts for Gen III and Gen IV LS engines, available with or without a windage tray provision.
Not Yet Reviewed
$3.99
$3.59
On Sale
BTR LS valve stem seals are designed for stock powdered metal and bronze guides; some include a built-in locator for single springs, and some use separate locators. The valve stem seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BTR valve stem seals are produced from high performance materials for increased part life and lower wear. Order the set recommended for your year/make and engine application.
( 24 )
$1.49
—
$1.99
$1.34
—
$1.79
On Sale
BTR flexplate fasteners feature extended length for proper use with a flexplate spacer (not for use without spacer). These flexplate to LS engine crankshaft spacer bolts are designed to be used with Gen III/Gen IV engines. They're machined from steel with a protective zinc coating. Order the quantity of BTR flexplate fasteners to match your application.
Not Yet Reviewed
$3.99
$3.59
On Sale
BTR water pump gaskets are designed for use with Gen III/Gen IV engines and feature aluminum/rubber construction. They're 4.0000 in. long x 2.0000 in. wide x 0.0625 in. thick and sold individually (two required per engine). When you're ready to install your water pump, do so with the quality sealing capabilities of Brian Tooley Racing LSx water pump gaskets.
( 3 )
$10.99
$9.89
On Sale
BTR water crossover seals are replacements for the seals found at the coolant port on each end of your cylinder heads. These rubber and steel gasket seals are designed for use on Gen III/Gen IV SBC engines. They're ideal for rebuilds or repairs involving your heads, particularly if your old seals have become worn or damaged due to coolant debris. BTR water crossover seals are available individually (four required per engine).
Not Yet Reviewed
$9.99
$8.99
OEM LS rocker arms are prone to failure, which can result in needle bearings being dispersed through the engine. Smith Brothers suggests replacing the factory needle bearings with solid bronze trunnion bushings that promote even wear and disperse valve spring load evenly. This trunnion upgrade also allows for 360 degree rotation and eliminates the travel stops (which create problems with higher lift camshafts) in the original OE rocker design.
Not Yet Reviewed
$6.99
On Sale
Brian Tooley Racing offers a variety of rocker arm replacement parts, such as trunnion bearings. Order the parts recommended for your year/make and engine application.
( 1 )
$0.25
—
$1.99
$0.22
—
$1.79
On Sale
BTR engine expansion plugs can fill those sand-release casting holes in your Gen III/Gen IV engine block. They're 0.25 in. tall with a 0.625 in. diameter. Whatever you call them: freeze plugs; expansion plugs; core plugs—Brian Tooley Racing plug cores will properly seal up your engine block. They're available for dozens of LS-based Chevy engine applications from 1997 and up.
Not Yet Reviewed
$3.99
$3.59
On Sale
BTR rocker arm bolts are rough and tough. They provide the correct fit and performance, matching that of the originals. Featuring steel construction, precise threads, and a black oxide coating, BTR's bolts are available individually and in sets for many applications.
( 7 )
$1.99
—
$3.49
$1.79
—
$3.14
On Sale
Brian Tooley Racing offers stock replacement steel cam gear bolt and main cap fasteners for a variety of Gen III and Gen IV LS engine applications—as well as certain kits for Gen V LT engines. The cam bolts secure the camshaft gear (sprocket) to the camshaft, with a reduced head size for easier installation; while the main cap fasteners are bolts used to attach the main bearing caps to the engine block, which hold the crankshaft firmly in place and are critical for proper crankshaft operation. BTR hardware is sold individually; 10 are needed for main caps, three needed for cam gear.
Not Yet Reviewed
$2.99
$2.69
On Sale
Performance-minded engine builders know there's an inherent issue with valvetrain deflection when using stock rocker arm mounting in Chevrolet Gen III-IV-cylinder heads. BTR LS shaft rocker kits are designed to significantly reduce deflection, thereby improving both performance and durability. Each kit features technology typically only found in high-end shaft rocker systems. These shaft rocker systems consist of a billet steel stand equipped with four shafts per cylinder head, fasteners and bearings. The shafts are made from genuine 52100 bearing steel. Each pair of rockers has five fasteners mounting them to the rocker stand, compared to the traditional single bolt per rocker configuration. These shaft rocker kits are ready for assembly using your existing stock rockers. (Rocker arm shafts are also available individually.)
( 15 )
$7.99
$7.19
On Sale
BTR rocker arm trunnion upgrade kits improve your stock LS Series rocker arms with captured needle-style roller bearings. They'll provide more stability for your modified application. BTR upgrade kits include rocker arm bearings, trunnions, snap rings, and assembly washers. Replace weak stock LS components with BTR rocker arm trunnion upgrades to support your added power. Order the kit recommended for your year/make and engine application.
( 67 )
$0.50
$0.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
