Availability
BMR Level 2 suspension handling packages are matched and developed to handle the twists and turns of your favorite road. Installation of these American-made components takes only a few hours of your time with basic hand tools. You can install superior handling on your ride today with BMR Level 2 Suspension handling packages. These BMR Level 2 handling packages include: * Lowering springs * Front and rear sway bars * Bilstein shocks * Upper and lower A-arms * Rear upper and lower control arms * Control arm mount braces
( 8 )
$2,349.00
Responsible for locating the axle, setting pinion angle, and controlling rear-end movement, leaf springs are a critical part of the rear suspension. BMR Suspension lowering leaf springs are superior to stock leaf springs that sag, rust, and do little to control axle wrap and wheel hop as they get older. BMR's spring design, combined with precise clamp locations, give you less wheel hop and more axle control. Their design reduces axle wrap that causes the spring to load and unload. By eliminating this oscillation, wheel hop is minimized and traction is improved. BMR lowering leaf springs are engineered for street performance, drag race, and handling applications. Not only a great way to add an aggressive look, they also improve handling by lowering the rear center of gravity and reducing body roll. New rubber bushings in the front give you a smooth, quiet ride, and polyurethane rear bushings greatly reduce deflection. They also come with PTFE antifriction pads for smooth, quiet travel throughout the spring's range of motion, which further reduces noise, vibration, and harshness. Combine BMR lowering leaf springs with BMR front lowering springs for a level, aggressive stance with huge improvements in handling and performance.
( 10 )
$479.95
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 24 )
$369.95
—
$1,169.00
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$329.95
—
$839.95
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$239.95
—
$659.95
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$259.95
—
$599.95
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$329.95
—
$749.95
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$209.95
—
$449.95
BMR offers rock-solid mounts for any parachute used to slow your car at the end of the race. These bolt-on units enable you to stop quicker and keep the stock appearance of your drag racer—or high-powered street car that sees the track often! They simply replace the factory rear bumper bar with a tubular version that doubles as a parachute mount and is easily removed when not in use. BMR parachute mounts include necessary hardware and are available in different colors and finishes.
( 3 )
$229.95
—
$309.95
When performance is your requirement, BMR rear suspension kits are your best options. The stronger suspension components, along with the 95-durometer internally fluted greasable bushings, will greatly reduce control arm flex and bushing deflection. What you receive is the improved performance you desired, plus suitable ride quality with acceptable noise and vibration levels. The kits are available in your choice of on-car adjustable and non-adjustable kits, as well as your choice of durable black or red powdercoated finishes.
( 18 )
$189.95
—
$429.95
BMR Level 2 drag race suspension packages include the right components for serious race car applications and have been track-tested on multiple cars deep into the 7-second zone at the dragstrip. They are available in your choice of black hammertone or red powdercoated finishes. The packages are designed to get the most traction possible, help transfer the maximum amount of power to the ground, and provide quicker 60 ft. times and better, more consistent overall elapsed times.
( 3 )
$1,399.00
BMR anti-wheelhop kits are a careful balance of fixed mounts and rubber mounts that provide a smooth ride and traction. With these kits, wheelhop is reduced approximately 75 percent with only a slight effect on ride quality. Available in black hammertone or red powdercoat finishes.
( 3 )
$349.95
Prevent your rear axle from moving side to side with BMR Suspension panhard bars. Factory bars use rubber bushings, allowing for deflection under a load. BMR panhard bars are made from heavy-walled tubing and employ either greasable polyurethane bushings or heavy-duty spherical bearings. Adjustable versions feature left hand and right hand threads for easy "on-car" adjustment. They are a must-have when lowering your ride or trying to fit the widest tires possible in your wheelwell.
( 100 )
$189.95
—
$299.95
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
—
$559.95
Add the ultimate lateral differential location device to your vehicle with BMR Watts link kits. They locate the rear-end housing and eliminate lateral axle movement by keeping the differential centered under the car throughout the suspension's entire range of motion. Manufactured from heavy-duty rectangular or drawn over mandrel (DOM) steel tubing and laser-cut steel plate, BMR's kits are the ultimate in strength. Double-shear link mounts connect the adjustable links to the center pivot for strength and zero deflection. Center pivots use a double-shear mount with a greasable Delrin bushing for smooth, bind-free movement. The links are built from heavy-duty aluminum with left and right hand threaded rod ends for easy on-car adjustability. They feature zinc-plated, heat-treated, chromoly, self-lubricating, PTFE-lined rod ends and, where applicable, high-durometer polyurethane bushings. They also feature 304 stainless steel, custom-designed rod end spacers. BMR designed their Watts link kits to work well for street performance, drag race, and road race applications. They are 100 percent bolt-in and require no cutting or modifying of the chassis. The kits are adjustable, allowing for fine-tuning and bind-free suspension articulation. Center pivots can be installed in several positions for multiple roll center locations. With strength, adjustability, and zero lateral axle movement, they are the perfect upgrade for the enthusiast that requires maximum performance from their suspension. BMR Suspension's Watts link kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3 to 4-hours.
( 1 )
$999.95
BMR Suspension cradle chassis braces provide an affordable way to lessen wheel hop and cradle movement on your vehicle. These lightweight, 100 percent bolt-on "stiffeners" use existing bolt holes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the steel braces greatly reduce cradle deflection. BMR cradle braces are offered in various powdercoat finishes for long-lasting good looks and service life. Available individually or in pairs, choose the braces designed for fitment on your vehicle application.
( 4 )
$229.95
BMR Suspension Trak Paks eliminate traction problems by relocating the torque arm front mount. The shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. BMR Trak Paks are equipped with a rear adjuster to allow on-car pinion angle adjustments for dragstrip tuning. The crossbar requires welding and professional installation.
Not Yet Reviewed
$569.95
BMR Suspension front chassis braces are designed to increase steering stability, K-member rigidity, and reduce front alignment changes on your S550 Mustang. These front subframe chassis braces are manufactured from a combination of thick tubular steel and heavy-duty boxed steel that's expertly welded together by BMR. The subframe chassis brace bolts onto the back side of your Mustang's control arm mounts and to your Mustang's K-member using high-quality hardware (included)—and doesn't require any drilling or welding. These K-members are available in either a black hammertone or red powdercoat finish to give you the look you want, along with excellent corrosion resistance.
Not Yet Reviewed
$239.95
BMR replacement torque arm crossbraces will maintain proper chassis stiffness. They are made from 1.25 in. x 0.120 in. steel tubing and come available in your choice of black or red powdercoated finishes. The crossbraces are non-adjustable and include a single polyurethane bushing.
Not Yet Reviewed
$219.95
BMR Level 1 drag race suspension packages feature carefully selected track-proven parts and combinations designed to maximize traction. They are perfect for street/strip vehicles, providing significant traction improvement without compromising street drivability. The packages come available in your choice of black hammertone or red powdercoated finishes, so you can add a unique look to the undercarriage of your vehicle.
Not Yet Reviewed
$1,229.00
BMR Level 4 suspension handling packages are designed with matched components to help increase overall handling. They're available for fitment on a variety of late-model muscle car applications. Level 4 handling packages include: * Front and rear lowering springs * Front and rear sway bars * Total suspension bushing kit * Sub-frame connectors, bolt-on * Rear upper and lower control arms * Driveshaft tunnel brace * Trailing arms * Toe rods, adjustable
Not Yet Reviewed
$2,789.00
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 199 )
$589.00
—
$739.00
BMR torque arm suspension kits are designed to eliminate the rear leaf springs, replacing them with a custom upper crossmember, adjustable control arms, and adjustable coilover shocks. They will provide lateral stability for acceleration and traction, and centered suspension articulation for bind-free handling. The kits feature a precision side-to-side axle positioning Watts link. The Watts link pivot is machined from 6061 billet aluminum and utilizes greasable, internally fluted Delrin bushings for a long, trouble-free life. Best of all, the Watts link is double-shear supported, unlike any other designs on the market today. Every component in the BMR torque arm suspension kits is completely adjustable. The torque arm itself provides pinion adjustability. The control arms are adjustable in length and have multiple mounting holes plotted in an arc to provide adjustment for anti-squat characteristics, giving your ride superior handling and traction. Help your street machine or track car realize its full potential with these BMR torque arm suspension kits.
( 2 )
$2,249.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
