Availability
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 7 )
$109.95
—
$299.95
BMR Suspension motor mount kits will curb engine shift--wasting less horsepower, reducing vibration, and improving throttle response. These bolt-in units come complete with brackets and hardware and are available in red or black hammertone powdercoat finishes. BMR kits afford you greater performance over the stock oil-filled hydraulic bushings designed for comfort.
( 27 )
$109.95
—
$259.95
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 486 )
$109.95
—
$269.95
Your vehicle's "instant center" determines it's ability to transfer weight upon acceleration for better traction. BMR lower control arm relocation brackets move the instant center of your vehicle by changing your control arm angle. These brackets will allow you to tune in the instant center of your chassis, an essential for racing or lowered vehicles.
( 51 )
$119.95
—
$139.95
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 199 )
$109.95
—
$269.95
Heavy-duty BMR panhard bar relocation brackets bolt to existing mounting holes without welding or drilling. BMR brackets install simply without affecting rear-end geometry and provide the additional clearance you need to complete your project. They come available in black hammertone or red powdercoated finishes.
( 25 )
$119.95
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
( 102 )
$129.95
—
$269.95
Minimize wheel hop and enhance rear stability with BMR Suspension differential bushings. They are far superior to factory bushings and drastically decrease differential movement and pinion rise. BMR bushings replace the entire OE bushing and are manufactured to strict tolerances for a perfect fit and increased performance. They will survive exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment. Several kits include heavy-duty hardware; while not necessary for all customers, BMR supplies the upgraded hardware for those who have higher power levels or plan on launching hard on the street or at the dragstrip. This hardware upgrade may require slight modification to the rear differential mounts. BMR Suspension differential bushings are available in: * Polyurethane--a synthetic polymer that deflects far less than rubber without excessive increases in noise, vibration, or harshness. * Delrin--a solid synthetic polymer that eliminates deflection and drastically increases differential stability. They are machined from solid Delrin and are intended for extreme performance street, drag race, and handling applications. * Billet aluminum--doesn't deflect and can also withstand much higher temperatures than rubber, polyurethane, or Delrin; making it a great choice for race cars where the differential creates large amounts of heat for extended periods of time.
( 17 )
$109.95
—
$269.95
Prevent your rear axle from moving side to side with BMR Suspension panhard bars. Factory bars use rubber bushings, allowing for deflection under a load. BMR panhard bars are made from heavy-walled tubing and employ either greasable polyurethane bushings or heavy-duty spherical bearings. Adjustable versions feature left hand and right hand threads for easy "on-car" adjustment. They are a must-have when lowering your ride or trying to fit the widest tires possible in your wheelwell.
( 100 )
$109.95
—
$229.95
BMR adjustable control arm mounts provide a world of possibilities in different colors for your vehicle's suspension performance. The middle hole on these components will retain the same geometry as your factory mounts, and by raising or lowering the angle of the upper arms, you'll be able to adjust your roll center and camber gain. Get the style and handling performance you want with an assist from the BMR adjustable control arm mounts best suited for your application.
( 5 )
$189.95
BMR transmission conversion crossmembers allow you to swap your choice of transmissions into your vehicle. They bolt to your OE frame points using existing mounting holes with no welding or drilling required.
( 21 )
$129.95
—
$259.95
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
BMR rear cradle bushing kits are designed to help minimize wheel hop and reduce rear cradle movement in your vehicle. They're manufactured from low-deflection polyurethane or Delrin for maximum strength and durability. Install a set of these, and the results are better handling and more consistent launches without significantly increasing noise, vibration, or harmonics. Select the kit designed for fitment with your make and model.
( 9 )
$119.95
—
$249.95
Stop the hop with BMR trailing arms. BMR Suspension offers a selection of trailing arms to fit your application with stable handling, minimized wheelhop, and consistent, better overall performance. You can choose non-adjustable heavy-duty rectangular steel arms fitted with polyurethane bushings or low-friction, Teflon-lined spherical bearings or their strong adjustable DOM tubing fitted with premium rod ends with stainless spacers/reducers. Stamped steel and rubber bushings make for poor performance. Choose better made BMR trailing arms for your performance setup.
( 38 )
$129.95
—
$229.95
BMR Level 2 cradle bushing lockout kits reduce wheel hop, bushing deflection, and cradle movement. The kits contain CNC-machined 6061 T-6 billet aluminum upper bushing lockout rings, CNC-formed stainless steel lower bushing support plates, and heavy-duty 1 5/8 in. DOM steel tubing cradle braces. BMR Level 2 cradle bushing lockout kits are 100 percent bolt-in, utilizing existing bolt holes and hardware. BMR Level 2 cradle bushing lockout kits: * No fabrication needed * Installs with simple hand tools * Laser-cut lower bushing support washers * Positively locates the rear IRS subframe * Greatly reduces stock subframe bushing deflection and wheel-hop * Uses factory bolt-holes and hardware * Adds a solid rear jacking point to each side of the vehicle * Durable powdercoat finish in black hammertone and red
( 9 )
$199.95
If your back wheels lack the consistency to stay the course, bolt up a pair of BMR toe rods. Their toe rods do for your rear wheels what tie rods do for your front-end. Unlike factory rods with rubber bushings, BMR toe rods are manufactured from heavy-duty, heavy-wall DOM tubing with spiral-fluted, low-deflection polyurethane bushings. Toe rods are bead-blasted and given a durable, powdercoated finish in either red or black hammertone. They come available in adjustable and non-adjustable styles and BMR also offers adjustable toe rods with rod ends.
( 5 )
$229.95
BMR Suspension torque box reinforcement plate kits offer strength and performance benefits for your Fox-chassis Mustang—which are not known for being strong. These kits will increase stiffness, reinforce the factory torque box, reduce control arm mount deflection, and deliver the ability for added horsepower and torque to be applied safely to your Fox chassis. The reinforcement braces for the upper and lower rear control arm mounts (torque boxes) are made from CNC laser-cut, CNC-formed, and MIG-welded steel plate. The plates bolt in using supplied hardware and require very little fabrication to complete. BMR kits are available for lower or upper only, or together. Prevent rear-end alignment issues, poor performance, and unsafe driving conditions—while putting as much power to the wheels as possible, without fear of damaging the critical area of your chassis—by adding BMR reinforcement plate kits.
( 20 )
$159.95
—
$209.95
BMR Suspension control arm spherical bushings are the perfect wheel hop solution for vehicles being used for performance driving. These control arm spherical bushings offer huge increases in performance over stock rubber upper control arm bushings. BMR uses heavy-duty 3/4 in. spherical bearings in machined bearing cups to replace factory rubber bushings, and the cup and bearing are pressed into the rear spindle. CNC-machined billet aluminum spacers complete the assembly. This eliminates most upper control arm bushing movement, reducing wheel hop, and helps increase handling stability, while giving you an improved overall feel in performance driving situations.
( 1 )
$129.95
—
$159.95
BMR Suspension IRS subframe support brace systems are designed for use with late model S550 Mustangs and compatible with stock bushings or BMR's popular cradle lock-out kit. This bracing adds additional rigidity to the independent-rear-suspension-to-chassis mounting, as well as additional reinforcement to the subframe itself. It achieves this by tying in to the front leg of the subframe where leverage is reduced. A super heavy-duty plate locks in beneath your sway bar mounts and gets tied into the rear bushing mount. Reinforce the weak points on your 6th generation Mustang for improved performance with a BMR Suspension IRS subframe support brace system. Features, items, and specs: * 4-piece independent rear suspension (IRS) bracing system * Reduces IRS movement and assembly deflection * Compatible with BMR and other IRS modifications/mounting solutions * Zero decrease in ground clearance * Extremely easy bolt-on installation * Reinforces critical areas of the IRS subframe by reducing leverage * High-quality hardware for installation included
Not Yet Reviewed
$239.95
BMR offers rock-solid mounts for any parachute used to slow your car at the end of the race. These bolt-on units enable you to stop quicker and keep the stock appearance of your drag racer—or high-powered street car that sees the track often! They simply replace the factory rear bumper bar with a tubular version that doubles as a parachute mount and is easily removed when not in use. BMR parachute mounts include necessary hardware and are available in different colors and finishes.
( 3 )
$229.95
Remove weight from the nose of your car and put it where it needs to be - over the rear wheels--with these BMR battery relocation kits. These custom battery boxes mount to the rear frame rail in place of the OE spare tire.
( 3 )
$209.95
BMR coilover conversion kits convert your 3rd generation F-body struts to coilovers. They include everything you need, there's no guesswork involved in getting the right components.
Not Yet Reviewed
$139.95
BMR heavy-duty rear toe rods ensure that the wheels remain set to a fixed position, not erratically pointing inward or outward under loading. BMR Suspension heavy-duty rear toe rods are made from 1 in. heavy-wall DOM and use PTFE-lined rod ends with stainless spacers.
( 14 )
$189.95
BMR caster camber plates add caster and camber adjustability and fix alignment issues. Manufactured from CNC laser-cut steel plate, BMR caster camber plates also replace weak factory strut mount bushings with high-quality, PTFE-lined spherical bearings. Their design increases camber adjustability and adds caster adjustability that isn't available from the factory. These adjustments also help reduce unwanted tire wear from too much negative camber. BMR Suspension designed these kits for street performance, drag race, and handling applications. They are 100 percent bolt-in, and most are available in black hammertone or red powdercoat. The kits use existing bolt holes and include the hardware required for easy installation. Once installed, the caster camber plates allow you to add aggressive alignment settings for both the street and track. This helps to keep the largest possible tire contact patch for autocross and road race applications.
Not Yet Reviewed
$219.95
—
$239.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
