Availability
Allstar Performance crankcase evacuation systems reduce crankcase pressure for fewer oil leaks and an optimum piston ring seal, resulting in a better performing engine. Each system includes two chrome plated push-in breathers, check valves, weld-in 3.5 in. long-threaded pipe adapters, rubber breather grommets, and four hose clamps.
( 35 )
$48.99
Are you in need of timing components for your Pontiac V8? Allstar cast aluminum Pontiac V8 timing covers have timing marks that include a water pump backing plate and two coolant inserts. These timing chain covers are designed to fit most 1969-79 Pontiac V8 engine models, including the 350, 400, and 455.
( 25 )
$209.99
Allstar Performance timing covers are offered in a variety of styles for that finishing touch to your mild street engine. They're manufactured from high-quality cast aluminum, in models for use with short or long water pump applications. Order the cover recommended for your engine.
( 70 )
$37.99
—
$104.99
Allstar Performance cylinder head dowel pin kits will keep gaskets in position and properly align cylinder heads to your engine block. Dowel pins are an often overlooked item when performing a rebuild or upgrading cylinder heads. Available for different applications, don't skip the pins—let Allstar kits make your build a definite success.
( 24 )
$6.99
—
$8.99
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
—
$12.99
Allstar Performance breather tanks are ideal for dry sump systems or rear differentials. They're built from aluminum and include a bolt-in mounting bracket, clamp-on and breather element, and drain plug. The tanks are available with one or two 3/8 in. NPT welded-in bungs.
( 39 )
$75.99
—
$79.99
Smaller capacity Allstar Performance mini breather tanks can be used with transmissions, differentials, or dry sumps. They feature spun aluminum construction, a 1/4 in. NPT welded-in bung on the bottom, and include a round bar chassis clamp for roll bar mounting. The tanks are available for flat mounting or for different sizes of roll bar tubing.
( 2 )
$69.99
Allstar Performance replacement check valves are for your crankcase evacuation system. You'll experience reduced crankcase pressure for optimum piston ring seal, fewer oil leaks, and better engine performance when all the components are operating correctly. Replace your faulty check valves with quality upgrades from Allstar.
( 9 )
$13.99
Allstar Performance 1:1 ratio pulley kits are lightweight, double-groove aluminum pulleys. They include crank and water pump pulleys and belts for use with Allstar block or head-mount power steering pumps. Order the model recommended for your engine application.
( 14 )
$114.99
Allstar Performance fabricated aluminum valve covers feature lightweight construction with a thick rail for gasket support. They are TIG-welded and are manufactured to help eliminate distortion and ensure a perfect fit to help protect your valve covers and rocker arms. The covers come standard with tubes, or without tubes for use with any wet or dry sump race engine. Mounting hardware is included to provide a hassle-free installation.
( 5 )
$179.99
Allstar Performance oil filter adapters are stock replacements designed to fit your engine block and accept an oil filter. These adapters are made with high-quality materials to create a durable product that you can depend on for years to come.
( 115 )
$7.99
—
$54.99
Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.
( 8 )
$126.99
—
$188.99
Allstar Performance immersion heaters preheat your oil for "hot" performance! Cold oil is not good. With Allstar immersion heaters, your overall warm-up time is reduced to get you to the line quicker. Improved lubrication during initial startup also means less stress on your engine and components. The stainless steel sleeve inserts into the pan or tank and secures with a welded brass screw-in fitting. Warm your oil for better performance with help from Allstar immersion heaters.
( 2 )
$129.99
—
$137.99
You're ready to go with Allstar Performance heating pads. Their high-temperature silicone heating pads externally preheat oil in wet sump oil pans, dry sump tanks, and automatic transmission pans, reducing overall warm-up time and improving lubrication during initial start-up. Choose self-adhesive or Velcro® strap pad styles. Thin your oil to flow quicker with Allstar Performance heating pads.
( 1 )
$108.99
—
$139.99
These Allstar Performance cast aluminum valve covers feature two 1 3/8 in. baffled breather tubes on one side and none on the other. They are manufactured from high-quality aluminum and have a polished finish. Their thicker design offers improved gasket sealing and a built-in spreader for secure mounting.
( 10 )
$132.99
—
$169.99
Allstar Performance breather socks help catch residual oil discharged from the engine through valve cover breathers. They offer a practical alternative to wrapping dirty shop rags around valve cover breathers! The socks fit over standard 3 in. diameter, 2 1/2 in. tall valve cover breathers and are easily cleaned with a mild detergent. They're available for both standard and shielded breather models.
( 6 )
$7.99
—
$9.99
Allstar Performance offers crankshaft pulley spacers for small block Chevy applications. Each kit includes three different sized shims (1/16 in., 1/8 in., and 3/16 in.) to properly align pulleys and keep them that way.
( 20 )
$21.49
Allstar Performance water pump pulley shims are designed for use with large or small water pump bolt patterns to help properly align pulleys. Allstar pulley shims have a dual bolt pattern to fit most GM and Ford water pumps.
( 13 )
$9.99
Allstar Performance Crankshaft Keys will restore proper timing gear and dampener positioning. They are available for short, long, and Vortec applications. Replace worn crankshaft keys with new ones from Allstar.
( 4 )
$4.99
Allstar Performance oil filter adapter fasteners are stock replacement mounts for securing oil filters to your engine block when rebuilding or replacing an engine. They are made from quality materials and install with simple hand tools.
( 18 )
$12.39
Specifically designed for your Circle Track race car, Allstar Performance small block Chevy crankshaft hubs are lightweight aluminum hubs that help you with quicker acceleration off of the turns. Significantly lighter than traditional harmonic balancers, Allstar black anodized crankshaft hubs weigh only 1 lb. and dramatically reduce rotating weight. The hubs have engraved timing marks at zero and from 30 to 42 degrees. Fit your internally balanced small block Chevy race engine with Allstar SBC crankshaft hubs.
Not Yet Reviewed
$209.99
Allstar Performance engine bags are water-repellent canvas covers with bottom drawstring, perfect for storage or transportation. Whether you're rebuilding an engine on a stand or awaiting a swap, you can keep the parts clean and dry with a protective bag from Allstar.
Not Yet Reviewed
$76.99
Allstar Performance extra-long bellhousing dowel pins are approximately 1/2 in. longer than stock pins and are required when running an engine mid-plate, rear motor mounts, or an aftermarket bellhousing. These extended length steel pins also help with alignment when you're installing an engine—and fit most GM blocks. Order the size and style needed for your application.
( 1 )
$10.79
Allstar Performance offers power steering pump bracket kits for small block Chevy applications. Available in head mount and block mount styles, the aluminum brackets are anodized for looks and protection—and include the necessary hardware. Before you head to the Circle Track, secure your power steering pump with top-quality components from Allstar.
( 6 )
$44.99
—
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
