Availability
The CV (constant velocity) joints of your Toyota connect the drive shafts to the wheels, ensuring the wheels rotate properly when accelerating or turning corners. Protecting the joints from the elements and damage are boots. They also help keep the joints properly lubricated. All-Pro Off-Road OEM CV boot kits replace torn deteriorating boots with durable neoprene that is stronger than natural rubber, as well as flexible, weather resistant, and chemical resistant. Available in kits for inner and/or outer boot replacement, All-Pro's CV boot kits are packaged with the necessary clips, clamps, and in most all kits, packets of CV joint grease. Kits are also available with or without crimp pliers. For years of worry-free operation, select an All-Pro Off-Road OEM CV boot kit designed for your Toyota.
( 1 )
$49.99
—
$149.99
All-Pro Off-Road now offers a heavy-duty Expedition version of its popular rear leaf springs for Toyota Tacomas. Long known for the superior quality and off-road performance of their standard-duty leaf springs, All-Pro's new Expedition leafs are specifically designed to combine off-road performance with heavy-duty weight carrying capacity. The popular expedition-style trend in off-road vehicles is resulting in trucks that are carrying heavier loads than normally seen off-road. Specialized long-distance excursion gear such as roof-top tents, recovery and repair gear, camping equipment, and extra water and fluids can add significantly to the cargo weight of expedition vehicles, exceeding the intended operating parameters of typical performance leaf springs. All-Pro's Expedition leaf springs feature a 20 percent higher spring rate than their standard leaf springs. They are otherwise identical in dimension and quality, providing the same eye-to-eye measurements and wheel travel. These Expedition leaf springs are designed to carry up to 500 lbs. consistently. Order the model recommended for your vehicle.
Not Yet Reviewed
$979.99
All-Pro Off-Road Baja Series front bumpers have race-inspired "Pre-Runner" styling, and are designed to protect the front-end on select Toyota Tacoma models, as well as improve off-road capability. They also allow for the mounting of up to a 9,500 lb. capacity recovery winch with remote solenoid (use of integrated solenoid winch requires grille trimming). The winch mounting surface on the Baja bumper features the common 10 in. x 4.5 in. bolt pattern used by Warn and other winch manufacturers. Tabs are included for mounting a winch fairlead, and there is also a convenient winch hook loop, on which to place the winch hook and tension the line for storage. Key features and options may include: * Heavy-duty steel tubing with CNC laser-cut and brake-formed 3/16 in. plate steel for winch structure and mounting plates * Sides wrap around the fenders, and there's a bottom hoop that serves as protection for the low hanging radiator with an integrated steel skid plate * High-clearance design with improved approach angles * Optional "Baja Taco" headlight hoops and filler plates * Bolt-on installation (except on 1998-2000 models) * Integrated skid plate * Integrated winch and fairlead mounts * Heavy-duty recovery points * Light mounting tabs to mount up to 6 in. lights * Lower radiator protection (may require shorter 4-cylinder radiator to install) * Hardware included * Winch not included (sold separately) * Bumper ships bare steel
( 2 )
$799.99
—
$1,199.99
All-Pro Off-Road offers steering tie rod extensions for a variety of Toyota vehicles—including many Tacoma, FJ Cruiser, and 4Runner models. These machined steel rack and pinion extensions are great for lengthening your tie rods for +2 in. long travel applications. Order the model recommended for your ride.
Not Yet Reviewed
$39.99
All-Pro Expedition 2.0 rear leaf springs are developed as an all-around off-road suspension option with long-term expedition capabilities. Expedition-oriented products are a growing segment of the Toyota aftermarket. From rock crawlers to pre-runners, All-Pro Off-Road has always been at the forefront of development for Toyotas. So, the expedition products are a natural addition to its product line. A higher leaf count spring allows the use of thinner leaf material that yields a more flexible and progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. Expedition leaf springs are designed to carry up to 1,000 lbs. consistently. Expedition 2.0 leaf spring specifications: * Number of leaves 9+1 Overload/Rebound * Eyelet-to-eyelet length (free): 54 3/8 in. (1381mm) * Spring rate: 248 lbs./in.
Not Yet Reviewed
$979.99
All-Pro Off-Road Pre-Runner rear bumpers are built to offer maximum rear ground clearance and provide protection for the body behind the rear tires. These wrap-around bumpers make a great attaching point for pulling other trucks with a tow strap, and the 1995-2004 models include two reinforced shackle-mount recovery points. The rear bumper includes integrated license plate mount and provisions for retaining the factory license plate lights. Your factory spare tire will mount under Tacoma trucks with these bumpers, but access to the spare tire lowering crank is limited. Replace your flimsy factory bumper with a Pre-Runner from All-Pro for peace of mind next time you're on an adventure. Features and options may include: * CNC laser-cut, bent steel tubing * Wrap-around rear quarter guards for added protection * Laser-cut mounting plates * Shackle mount recovery points * Mounts with factory hardware * Bumper is now Class IV tow rated * Bumper ships bare steel, but may be painted
( 3 )
$719.99
All-Pro Off-Road body mount relocation kits resolve the issue of body mounts interfering with large off-road tires. Each kit moves the body mount completely behind the firewall, allowing you to fit up to 35 in. tires on your vehicle without rubbing the body mounts. Of course, other trimming will be needed to install the larger tires. All-Pro Off-Road body mounts are CNC-cut and formed from 1/4 in. thick steel, making them ready for harsh off-road use, and the AP design includes a guard for the mount bushing and bolt. All-Pro Off-Road relocation kits will require welding for installation and downloadable instructions are available.
Not Yet Reviewed
$99.99
All-Pro Off-Road skid plates armor the underside of your rig. Stronger than stock skid plates, All-Pro offers several styles to cover your vehicle from front to back. When traversing vigorous trails, you need extra protection. All-Pro Off-Road skid plates will guard your vital components. Features include: * Heavy-duty CNC laser-cut 3/16 in. steel plate construction * Lightweight 1/4 in. 5052 aluminum (not all styles) * Most include hardware * Shipped raw * Bolt-on installation
( 13 )
$79.99
—
$349.99
All-Pro Off-Road rock sliders are a result of decades of extreme off-road experience. After all, All-Pro Off-Road knows first-hand that rock sliders must be strong enough to protect your investment, look great, and yet still allow for sufficient ground clearance. These sliders are available in either bolt-on or weld-on models. Order the pair designed for fitment on your vehicle application. Features: * Made from heavy-duty steel wall tubing for the utmost strength * Outer tube angles upward to provide more ground clearance and door protection * Rear of rock sliders extends out just before the rear wheels to provide extra body protection where it's needed most * Signature "kick-out" design protects the rear portion of the cab while maneuvering through tight obstacles * 1995-2004 Tacoma Standard Cab, as well as 1996-2002 4Runners, are recommended to use 60 in. rock sliders * 1995-2004 Tacoma X-Cab or Double Cab are recommended to use 80 in. rock sliders * Rock sliders come unpainted so you may paint or powdercoat in the color of your choice * All-Pro rock sliders also serve as a convenient lifting point (with a High-Lift jack along the bar to lift one or both wheels)
( 28 )
$599.99
—
$699.99
The CV (constant velocity) joints of your Toyota connect the drive shafts to the wheels, ensuring the wheels rotate properly when accelerating or turning corners. Protecting the joints from the elements and damage are boots. They also help keep the joints properly lubricated. All-Pro Off-Road high-angle CV boot kits replace torn deteriorating boots with durable neoprene that is stronger than natural rubber, as well as flexible, weather resistant, and chemical resistant. Available in kits with high-angle outer boots or high-angle outer and inner (OEM) boot replacement, All-Pro's CV boot kits are packaged with the necessary clips, clamps, packets of CV joint grease. Kits are also available with or without crimp pliers. For years of worry-free operation, select an All-Pro Off-Road high-angle CV boot kit designed for your Toyota.
( 3 )
$89.99
All-Pro Off-Road brake lines are the upgrade your Toyota needs for improved stopping power. They directly replace your factory lines and are easy to install. Features: * Braided stainless steel cover with PTFE inner core * Includes 2 clips * US DOT-approved * Sold individually or in sets
( 1 )
$49.99
Now you can journey further with All-Pro Off-Road's jerry can holders! These aluminum jerry can holders are specifically designed to fit 20 liter (5.3 gallon) NATO-style jerry cans. An extra 5-gallons of fuel is certainly reassuring; however, these carriers go further by holding up to two cans for a total of 10.5 gallons. With that kind of capacity, your overland trips can take you just about anywhere! Jerry cans are sold separately. Additional product details: * Adds ability to securely transport jerry cans to All-Pro dual swing out bumpers * Holds two NATO style 20 liter jerry cans * These carriers fit All-Pro Off-Road's dual swing-out bumpers for the 2005-2015 Toyota Tacoma * All-Pro recommends sourcing Wavian NATO jerry cans for use with this jerry can holder—fitment may be different between different brands of jerry cans
Not Yet Reviewed
$199.99
All-Pro Off-Road axle relocation plates can be used to center the axle, improve approach and departure angles, and to correct pinion angle. They are fabricated from 3/8 in. thick ASTM A36 steel to help you change the position of your axle.
Not Yet Reviewed
$39.99
All-Pro Off-Road rear suspension lift kits with Fox shocks offer super trail flex combined with a stable street ride. The All-Pro lift has all the benefits of custom springs with the advantages of mass production (lower price and quicker delivery). Compare these features with other spring makers: All-Pro leaf springs offer consistent arch, lift, and spring rate; shot-peened leafs to reduce spring fatigue; pre-cycling to reduce sag; anti-wrap leafs; PTFE liners (pads); and full military wrap. Choose the kit preferred for your Toyota. Features and benefits: * All-Pro leaf pack--choose Standard or Expedition springs * All-Pro rear U-bolt flip kit with CAD plated, tapped plates * Fox 2.0 IFP Performance Series or 2.0 non-adjustable remote reservoir shocks * Steel braided rear brake lines
Not Yet Reviewed
$999.99
All-Pro Off-Road rear suspension lift kits with Bilstein shocks package everything you need to lift the rear of your truck with quality components! You get a choice of 3, 4, 5, or 6 in. lift long-travel rear leaf springs. They're longer than stock to provide much greater travel and articulation. With an integrated lip for easy placement, mounting is a snap; simply weld the rear spring hangers onto the frame. Kits are available for 1979-88, 1989-95,1995-2004, and 2005+ Toyota applications. Kit includes: * (2) 3 in., 4 in., 5 in., or 6 in. rear 56 in. long-travel springs with bushings * (2) 5100 Bilstein shocks * (1) set of two 1.5 in. longer greaseable shackles * (1) Extended rear brake line * (1) Rear U-bolt flip kit * (2) Rear shock mounts with hardware * (2) Heavy-duty spring hangers with greaseable bolts * (2) 3-hole perches * (2) Rear shackle mounts
( 1 )
$999.99
Save time and money with a full All-Pro Off-Road APEX suspension lift kit. These combo kits feature King front coilover shocks (with external reservoir) and rear reservoir shocks are intended for those who want a complete race-proven suspension system. Front coilovers are adjustable for 0-3 in. of lift, and optional bump stops are available. Each kit also comes with a pair of All-Pro tubular chromoly upper control A-arms, a pair of All-Pro Standard or Expedition Leaf Pack, a pair of braided steel extended brakes lines, and a U-bolt flip kit with tapped plates for bump stop. Front and rear shocks are available in single adjustable or non-adjustable coilover options. Lift specs: 2.5 to 3 in. rear lift (standard springs) or 3 to 4 in. (Expedition springs). Order the kit and shock preferences designed to fit your application.
Not Yet Reviewed
$5,528.54
—
$6,782.11
All-Pro Off-Road APEX rock sliders have been trail-tested on some of the most grueling terrain, from the Rubicon to the Hammers. Built from heavy-duty wall tubing, the shape of these sliders is critical, in that it determines how much body protection they can provide—as well as how the truck slides along the obstacles without getting hung up. The rocker guards are available in bolt-on and weld-on models. Order the pair designed for fitment on your vehicle application. Additional features: * Heavy-duty DOM steel tubing for the outer structure, with 2 in. square legs that are fully-gusseted for added strength * Slight angle to provide clearance (and a step as well) * Signature "kick-out" design * Improved bolt-on mounting system available with built-in frame support (for bolt-on models) * Easy installation, minimal drilling required (to support the full weight of the vehicle) * APEX logo (on the kick-out portion) * Rock sliders come unpainted so you may paint or powdercoat in the color of your choice
( 4 )
$599.99
—
$849.99
All-Pro Off-Road APEX front bumpers are designed to meet your demands for durable, low-profile bumpers that look as good as they function. These All-Pro Expedition bumpers, dubbed APEX for short, are available in lightweight aluminum and steel versions with hoop options for multiple lighting configurations. All-Pro Off-Road APEX front bumpers ready your rig with rugged armor and appeal that will illuminate any excursion you undertake. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel plate * Two beefy 1 in. thick recovery points made from 1.5 in. x .250 wall tubing welded to thick plates * Two 4 in. light mounts are built-in * Ideal for trucks running 35 in. or larger tires and requiring winch and light mounts * Integrated recover points * Ships bare steel or aluminum * Includes mounting hardware and lower valance * Aluminum is almost 50 percent lighter than steel version * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a small light bar * Optional center hoop is tall enough to offer grille protection, as well as providing two additional light mount tabs * Optional full hoops option includes the center hoop and headlight hoops for the highest level of protection (not available for all versions) * Heavy-duty winch mounting (not available for all versions) * Lower valance (not available for all versions) * All-Pro IFS skid plates attach directly to these bumpers
( 2 )
$999.99
—
$2,449.99
All-Pro Off-Road Sport suspension lift kits with Bilstein shocks include everything you need to improve the performance of your 1995-2004 Tacoma—and they're easy to install. The kits include a pair of All-Pro Bilstein front coilovers, which provide 0 to 3 in. of lift; as well as Add-a-Leafs, extended U-bolts, and extended brake lines. (Add a pair of All-Pro upper control arms for 2 to 3 in. lifts to achieve factory alignment.) Bilstein shocks are available assembled or unassembled, and with a 550 or 650 lb. coil spring.
Not Yet Reviewed
$1,499.99
—
$1,999.99
All-Pro Off-Road spindle gussets help brace factory spindle uprights to give your vehicle the strength it needs for the toughest trails. Weak factory spindles are known to bend when taken off-road. Don't let your trip end early. Prepare your vehicle for the abuse beforehand with All-Pro Off-Road spindle gussets—and be ready for whatever you may encounter on the trail. These steel CNC laser-cut and bent brackets are compatible with forged OEM spindles and will require some welding and grinding for installation. They're available for a variety of applications, including Toyota Tacoma models from 1995 and up.
Not Yet Reviewed
$39.99
Looking for super trail flex combined with a stable street ride ... and a great price to boot? Then All-Pro Off-Road has your springs—featuring all the benefits of a custom spring with the advantages of mass production (lower cost and quicker delivery). All-Pro front long travel leaf springs are made to strict specifications, ideal for rock crawling, soft enough to allow flex on the trail, yet stiff enough to drive on the freeway safely. Factory springs and other aftermarket springs are made with different packs, left and right, to accommodate the mismatched factory perches. Using two different springs works as long as the springs are designed for the exact weight of the truck. However, if the weight of the truck differs from the ideal weight for the springs, the truck will lean to one side or the other because these springs have different spring rates. Designed for 1979-95 Toyota pickups and 4Runners in the 3,000 to 4,500 lb. range, all of the All-Pro front springs are identical, left and right. Included with each set is a small pad to be welded to the driver side spring perch, making both perches the same height. Identical left and right springs won't cause your truck to lean the way other aftermarket springs can. Order the pair recommended for your application.
Not Yet Reviewed
$979.99
All-Pro Off-Road high-clearance receiver hitches are available for older-style All-Pro rear bumpers and the models not compatible with factory tow hitches. For the later, the tow hitches will tuck up inside the bumper, resulting in no loss of ground clearance or departure angle. They are cleverly hidden behind your license plate and include brackets for safety chains and re-mounting your plug receptacle. The hitches for older bumpers are simple add-ons, but do not include the required brackets. Both All-Pro Off-Road high-clearance receiver hitches are fabricated from heavy-duty gusseted steel for maximum strength and shipped raw.
( 1 )
$139.99
—
$199.99
All-Pro Off-Road's 4Runner low-profile front bumpers are designed to fulfill your demand for a durable, low-profile bumper that looks as good as it functions. The bumpers are available in steel and lightweight aluminum versions, including models with hoop options for multiple lighting configurations. Aftermarket bumpers are a great way to add additional protection and functionality to the front end of your vehicle. There are a ton of different bumpers out there, but if you want to keep the OEM look and perform minimal cutting, the All-Pro Off-Road low-profile front bumpers are an excellent option. Choose the All-Pro Off-Road low-profile front bumper model that is designed for your application needs. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel faceplate version that provides a solid mounting structure to vehicle frame * Available in bare and black powdercoat option * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a single-row (30 in.) light bar (lighting not included) * Optional center hoop is tall enough to offer grille protection, as well as providing additional light mount tabs for pod lights (lights not included) * Integrated recovery points * Heavy-duty winch mounting (on select bumper versions) * Compatible with most 8-12k winches with a remote mount solenoid box (winch not included) * Includes mounting hardware * Bolt-on installation (cutting of factory plastic bumper required for installation)
( 1 )
$399.99
—
$849.99
Get the most out of your composite bed with All-Pro Off-Road bed channel stiffeners. Bed racks, rooftop tents, and even tie down straps or modifying your bed for larger tires will cost your some bed rigidity, and cause your bed channels to flex and eventually crack. All-Pro Off-Road bed channel stiffeners are designed with double shear mounting points, constructed from 3/16 in. thick ASTM A36 steel, and finished with a durable black powdercoat. They add seven tie-down locations to each side of your truck bed, and they are topped with accessory mounts that make a great location for your antenna, lights, or off-road flag. Outfit your truck bed to confidently handle the extra weight and stress of great payloads and accessories with All-Pro Off-Road bed channel stiffeners.
( 8 )
$119.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
