We’re still here and shipping orders—let’s build It together. Learn more.

In-Store Pickup Location

Tanks Inc. Fuel Level Sending Units TAN-GML

Tanks Inc. TAN-GML - Tanks Inc. Fuel Level Sending Units

Loading media


In progress

Fuel Tank Sending Unit, 0-90 ohms, Each

Estimated Ship Date: ...Loading Tuesday 5/26/2020
Would you rather pick it up? Select Location

Hazardous Material Warning
WARNING
WARNING: Cancer and Reproductive Harm For more information, visit www.P65warnings.ca.gov.

41 Customer Reviews for Tanks Inc. TAN-GML - Tanks Inc. Fuel Level Sending Units

Average Customer Review

5 Star

(23)

4 Star

(7)

3 Star

(5)

2 Star

(4)

1 Star

(2)

Results 1 - 10 of 41

Sort by Most Helpful Sort by Newest Review This Product

Gas gauge sending unit, mechanical fuel pump

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Remember the old saying "measure twice, cut once". Be patient and take your time, because if you cut too much off of the float arm or the sending unit, you will be buying another one. Practice does NOT make perfect! For this unit, which is a generic, "catch all" design, you will need to measure, to be safe, quite often, trimming a little at a time to get it where it needs to be. We would recommend doing this on a workbench, using as many rulers and tape measures needed to find the bottom of tank (unless you have x-ray vision). For 65-66 Belair, Biscayne, Caprice Impala (except station wagons), fishing this assembly into the tank is like trying to put toothpaste back in the tube. NOTE: If you set this up with the float touching the bottom of the tank before it reaches the lower stop on the sending unit, your gas tank will be empty long before your gauge shows empty. You want the float arm to bottom out on the sending unit and at the same time, be about 1/4" off the bottom of the fuel tank, for an accurate reading on dash gas gauge. The mounting holes on the unit and tank are offset, so it can only be assembled in one position (cannot be "clocked"). On factory style tanks, the sending unit arm runs parallel with the driveshaft. This sending unit arm (mechanical fuel pump) runs parallel with the axles, so, there will be a learning curve on fuel reserves every time you drive aggressively thru corners. Jury is still out on the cork gasket. ...read more

1 of 1 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from OH

Date: June 11, 2019

Appearance
Ease of Installation
Price/Value
Quality

Fuel Level Sensor

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Yes this sensor works! The issue I have is with Tanks. I bought the entire kit from Summit. (tanks with sensor and pump) The Kit came with a 30 ohm sensor. Well I needed the 90 ohm sensor. So I had to buy 2 sensors and will probably throw the original one away. Looking back at summit, they do not specify the sensor ohms. Remember if you find out that the sensor is wrong, you then need to drop the tank. In my case it was full. This was an unpleasant mistake. Dan ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from MD

Date: February 08, 2020

Appearance
Ease of Installation
Price/Value
Quality

Good quality and fast shipping

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Can be used in a wide range of fuel tank heights. Install per manufactures instructions and it works fine.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from PA

Date: January 20, 2020

Appearance
Ease of Installation
Price/Value
Quality

Fuel tank level

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Requires a little bit of thinking.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from KS

Date: January 14, 2020

Appearance
Ease of Installation
Price/Value
Quality

Excellent quality

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
This is extremely easy to set up. Follow the instructions and you will have a very accurate reading. I used this with the SUM-G2885-4 full sweep gauge. It is dead on accurate and very stable while maneuvering. This is an excellent combination. Quality is excellent.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from AZ

Date: November 10, 2019

Appearance
Ease of Installation
Price/Value
Quality

Level sender

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Looks like good quality, installed in tank easily.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from OR

Date: November 05, 2019

Appearance
Ease of Installation
Price/Value
Quality

Not well designed

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Read thru instructions and installed. Unit never read below full. Removed and worked it over three times and it still doesn't work.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from FL

Date: July 01, 2019

Appearance
Ease of Installation
Price/Value
Quality

Alignment is poor

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
This sender was purchased to fit the Tanks INc. EFI tank for my 69 GTO. The bolt hole alignment in the flange does not align with the tank mounting holes. Had to drill the holes in the flange larger to align with the tank mounting holes. You will need to use Permatex 85420 to ensure a good seal.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from Canada

Date: April 27, 2019

Appearance
Ease of Installation
Price/Value
Quality

Sending unit

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
Good quality simple to install and works good for my aluminum fuel cell.

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from Canada

Date: April 12, 2019

Appearance
Ease of Installation
Price/Value
Quality

wrong part

Summit RacingSummit Racing Verified Purchase

TNK-TAN-GML
was given the wrong sending unit for this application

0 of 0 found this review helpful.

report abuse

Report Abuse X

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: from TX

Date: April 03, 2019

Appearance
Ease of Installation
Price/Value
Quality

Some parts are not legal for use in California or other states with similar laws / regulations

Back To Results
Email this page