If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will this backspace fit a 2012 range rover Autobiography?
I want 20” steel wheels. I know thatvthere is a 0.65mm difference in the bolt pattern, but other than than, can they fit?
Asked by ADAM on 3/26/2021
Thank you for your question. The U.S. Wheel 69-2834 69 Series Rat Rod bare wheel will not fit your 2012 Land Rover Range Rover. For this vehicle, you will need a wheel 20" x 8.5" with 6.0" - 70" backspacing.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
What other offset or backspacing are these available in?
Asked by JOHN on 1/6/2021
for the 9 inch wheel 4.75 is there standard but when I called and talked to them they can build as needed. I was dealing with Anthony and he was a great help.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I would actually like to use these wheels but keep the bare look. Is that recommended and if so is there any coating you recommend putting on them?
Asked by KEVIN on 5/16/2020
Even though there's no picture available or can I see the picture imagine that you're trying to put on the Crown Vic. I got used to it a most people think they they look good but they are the wrong upset they will stick out of you car like 1 and a 1/2 in you will not be able to lower your car even though you can use the center caps from the p71 they fit perfectly but they stick out kind of all out for my taste like I said I got used to it already
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I would actually like to use these wheels but keep the bare look. Is that recommended and if so is there any coating you recommend putting on them?
Asked by KEVIN on 5/16/2020
Even though there's no picture available or can I see the picture imagine that you're trying to put on the Crown Vic. I got used to it a most people think they they look good but they are the wrong upset they will stick out of you car like 1 and a 1/2 in you will not be able to lower your car even though you can use the center caps from the p71 they fit perfectly but they stick out kind of all out for my taste like I said I got used to it already
CARLOS from NC | 5/27/2020
Q:
Does this fit an 89 chevy c1500 truck?
Asked by ANDY on 11/29/2020
Thank you for your question. U.S. Wheel 69-2950 wheels will fit on a 1989 Chevy C1500 truck.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Do these need to be painted, or is the finish sufficient for a rat rod as is?
Asked by JAMES on 9/30/2018
Thank you for your question. U.S. Wheel 69-5734 is a bare finish and will be the silver color of the steel. This wheel will rust if no paint is applied.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these wheels accept corvette rally caps, and or trim rings?
Asked by RODERICK on 2/4/2020
The U.S. Wheel 69-8034 Wheels will not accept factory style Corvette ralley center caps or trim rings. This will does have different style center caps that will work. For example, the U.S. Wheel Hub Covers C113475 and U.S. Wheel Hub Covers C112 will work. The trim rings are U.S. Wheel Trim Rings TRSS3005-17R.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
can you get in 8' and 3 inch back space
Asked by ANDY on 4/7/2018
Thank you for your question. The U.S. Wheel 69-8034 wheel can be special ordered in 15 in. x 8 in. with a 3.00 in. backspacing under part number USW-69-8834-SPEC. This is a custom part and will require you call our sales department at 1-800-230-3030 to place an order.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
it says this fits my truck
{ 1999 mazda b2500 2 wheel drive extended cab }
does it so i can go ahead and place a order soon
Asked by THOMAS on 9/23/2017
You can use the Verify Fitment box found in the Applications section of the U.S. Wheel 69 Series Rat Rod Bare Wheels 69-8812 product page to check. This wheel does not properly fit a rear-wheel-drive (RWD) 1999 Mazda B2500 with the extended cab. We offer the U.S. Wheel 69-5712 model for that application.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Can you put the beauty rings on these?
Asked by DENNIS on 12/25/2021
Thank you for your question. The U.S. Wheel 69-8834 wheel will accept several wheel trim rings including the U.S. Wheel TRSS3005-15R and TRSS3005-15, among others.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
is there any coating on the wheel? can i leave it with the metal look or would that require clear coat to avoid rust?
Asked by ARIC on 3/4/2021
This would require clear coat. It comes with some oil on it but I had to blast some surface rust off of mine before powdercoat
BEN from MO | 3/4/2021
Q:
Will this rim except a baby moon hub cap? how about a thin chrome beauty ring?
Asked by DAVID on 1/18/2020
Thank you for your question. U.S. Wheel 69-8860 wheels will not work with a baby moon center cap. This wheel is designed to work with push-through style caps or bolt-on spider style caps.
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
