Availability
Showing In Stock Items. Show All 54 Items.
ARP torque converter bolts are manufactured from 8740 chromoly steel and feature 200,000 psi tensile strength. Add a set to your drivetrain, and shearing torque converter bolts are a thing of the past.
( 274 )
$10.99
—
$16.99
These torque converter bolts from Moroso are specially designed to provide maximum holding strength and eliminate the possibility of shearing.
( 22 )
$15.99
Replace worn-out torque converter bolts with a fresh set from Summit Racing™. These replacement hardware kits contain Grade 8 steel bolts that have been heat-treated and black oxide coated. They're available in different thread sizes for a variety of transmission applications.
( 12 )
$7.99
Have a clutch repair to do? Use Hughes Performance torque converter bolts! They provide the advantage of high quality and convenience. These bolts feature steel construction and the bolt threads are coated with a special thread-locking compound to maintain proper bolt torque.
( 4 )
$22.99
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$18.40
$11.96
—
$24.98
Spectre Performance torque converter bolts are Grade 8, black oxide plated for corrosion resistance, and they include security lock nuts. Manufactured using high-quality materials, this hardware is engineered for optimum fit and function.
( 2 )
$5.99
Do you need torque converter bolts? ACC Performance has the torque converter bolts that secure your Boss Hog. Available for several applications, Boss Hog torque converter bolts are the right bolts for your Ford, GM, or Mopar.
( 41 )
$8.00
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 355 )
$294.99
—
$346.99
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$329.95
—
$549.95
Allstar Performance torque converters offer power and economy for your moderate drag racing, factory, or street stock machines. These Allstar converters are completely remanufactured with new pump drive hubs and thrust washers. Choose from several stall speeds for your GM, Chrysler, or Ford transmission. Exact stall speeds will vary, depending upon displacement, torque, and vehicle weight. Transfer your engine torque with value-priced Allstar Performance torque converters.
( 9 )
$239.99
—
$339.99
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 31 )
$538.99
—
$812.99
If you use your ride as both a daily driver and weekend racer, you'll want the strength and reliability of FTI Performance SR Series torque converters. They're engineered entirely in-house at FTI and built to handle above-average power. These units feature TIG-welded furnace-brazed fins, a heavy-duty race sprag, and a hardened steel impellor. SR Series non-lockup converters include Triple Torrington bearings and a billet front cover for extra toughness. Each completed torque converter is pressure-checked and computer-balanced to ensure quality. Order the parameters desired and the model recommended for your transmission application.
( 14 )
$769.00
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,299.95
ACC Performance LS Wild Boar Outlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9.60 in. in diameter and have stall speeds ranging from 2,800 to 4,2000 rpm.
( 1 )
$1,048.48
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 97 )
$400.35
—
$699.39
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
—
$699.95
These TCI Ultimate StreetFighter converters are completely remanufactured with furnace-brazed hand-welded fins, a cast steel stator, a hardened pre-ground front pump hub, a dual bolt pattern, and needle bearings. These converters will give you about a 4,000 to 5,000 rpm stall speed for competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Some applications are also available with an anti-ballooning plate for use on nitrous oxide equipped vehicles.
( 4 )
$955.95
—
$974.95
Summit Racing™ nitrous torque converters can make a difference in how your race car performs. Our performance torque converters are rated at 800 hp and are good choices for your nitrous, blower, and trans-brake applications. They feature fully furnace-brazed fins and anti-ballooning plates to strengthen the converters internally for reliable high performance in your application. Some converters are available with a billet cover for added strength and durability. Be more competitive at the strip and get more performance on the street--install one of our Summit Racing™ nitrous torque converters.
( 21 )
$610.99
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,794.95
—
$1,815.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$399.95
—
$949.95
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 59 )
$624.95
—
$657.95
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 106 )
$525.95
—
$580.95
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 113 )
$365.99
—
$517.99
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 232 )
$437.99
—
$1,089.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
